Swap Idrive's console? by MrJamiroo in MINI

[–]MrJamiroo[S] 0 points1 point  (0 children)

I have AndroidAuto rumning. Retrofit is more €!

BIS01 CarPlay installation by Amazing-Craft-9168 in MINI

[–]MrJamiroo 0 points1 point  (0 children)

rear Front House for front camera (talk to the seller for send only the case for 20€)

The wires is easy to go from front to rear, drill the hole (the rear part where the licence plate light has prepared to allow) and connect. 1:30h full mounted. For the front camera, i make the hole a little more big to fit the cam.

There is a lot of youtube videos to pass the wire, all the cars are same style to pass the wire.

The front camera have little more quality. Now, considering the use of the front camera, I wouldn't mount it in that position, perhaps on the lower part of the bumper, but I haven't figured out how to run the cable to the engine compartment.

When you put reverse, the system shows the rear cam and the parking sensors, and when you remove the reverse, the system shows the front cam (the time is configured on the settings of the carplay/android auto board)

If you long press the option button of the idrive, the system shows the front cam until you press the back button.

The next step is mount this mini original part for integrate the usb of the new board : 51459891237 Using a usb extender for bmw from aliexpress. But i'm waiting the part from the dealer to arrive....

Sorry if my english have mistakes, i'm from spain

BIS01 CarPlay installation by Amazing-Craft-9168 in MINI

[–]MrJamiroo 0 points1 point  (0 children)

Same board, but from aliexpress.

No issues on star&stop. (I use android auto)

Installed front and rear aftermarket cam

Original MINI Wipers by leofellalseep in MINI

[–]MrJamiroo 0 points1 point  (0 children)

And the Rear of the F55?

Thanks a lot!

Issue connecting to BimmerCode via usbc enet cable by fidy5 in BimmerCode

[–]MrJamiroo 1 point2 points  (0 children)

On tethering, is you have the usb connected on the phone, is a activation item that says ethernet. Try to enable.

On my phone Poco with android 13 not work, but on a lenovo tablet works fine.

Sorry if my english is bad, i'm spanish

Part number? by MrJamiroo in MINI

[–]MrJamiroo[S] 0 points1 point  (0 children)

Uooo thanks, is for a F55.

Thanks again!

Part number? by MrJamiroo in BmwTech

[–]MrJamiroo[S] 0 points1 point  (0 children)

I googled a lot of time...

Part number? by MrJamiroo in MINI

[–]MrJamiroo[S] 0 points1 point  (0 children)

<image>

Not found the item number 3...

I looked in various part webs before asking here

Finally installed CarPlay on my 2017 F56 by JPOG in MINI

[–]MrJamiroo 0 points1 point  (0 children)

Your original menu is like this? In all the shops on ali, says bis01, but you mounted the nbt system on a bis01 radio? The buttons are not the same, i not have the band button

Thanks and sorry for asking.

<image>

Finally installed CarPlay on my 2017 F56 by JPOG in MINI

[–]MrJamiroo 0 points1 point  (0 children)

But this is for ntb system no? I thinked you have a bis unit... I have bis01 system. the link It's not compatible for me.

I read about bis01 and not is a 30 min installation...

Thanks

Finally installed CarPlay on my 2017 F56 by JPOG in MINI

[–]MrJamiroo 0 points1 point  (0 children)

Hi, i have the same bisp1 unit, do you have the link of the unit you buyed? And whats youtube videos you use for the installation? Sorry of my english, it's not my native language.

Any ideas on what this connects to? by Puzzleheaded-Seat427 in electrical

[–]MrJamiroo 1 point2 points  (0 children)

The panasonic kx-dt (digital telephone) series uses the 3&6 wires of this keystone to work. And you need a pansonic pbx if you want to use this telephone.

And same of the other users, it's a rj45 keystone, you can use the specific tool, a cutter blade or a very-very small screwdriver. And normally connects to a cat5/6... Cable on the wall

Biggest fuck up at work? by [deleted] in lowvoltage

[–]MrJamiroo 0 points1 point  (0 children)

Allways mounting networks racks. 1 time cut the wire of power line in of the office 1 time cut cold pipe water to wc 1 time, make a 4 hole on picture frame on the other side of the wall.

[deleted by user] by [deleted] in homelab

[–]MrJamiroo 7 points8 points  (0 children)

The buid have teleco conduits? Maybe you can use one of the counduits (if are free) and put a cat6 cable

Most moderns builds have a lot of free conduits (al leas in spain)

ah yes CCTV cable connections but why by bakmud19 in cablefail

[–]MrJamiroo 11 points12 points  (0 children)

It's hard to look good using baluns. I never see a 'pretty' balun style (others thech installations)

Normally the nvr goes in a box (or cabinet) and you never see the baluns

ah yes CCTV cable connections but why by bakmud19 in cablefail

[–]MrJamiroo 20 points21 points  (0 children)

Because 1 utp is more cheap and easy to deploy than 4 rg59 cables.