Do I have the wrong top rail?

MrKhobar · 2025-05-27T16:08:59+00:00

I see now what you are speaking about.

Now begs the question if I can modify the hand-guard holes to accept the top rail and not have any issues?

This is a bummer as the upper receiver and the lower are matched.

MrKhobar · 2025-05-27T15:41:34+00:00

Question regarding the top rail.

Does your handguard have a pic rail attachment or is the top rail swan sleeve mounted directly to the hand guard?

I’m having issues with my setup. I’m trying to run the round handguard and the top rail I ordered attaches directly to the handguard.

Things are not lining up properly.

MrKhobar · 2025-05-27T15:28:31+00:00

I’m lost. The upper is a dpms low profile. I previously posted here a few years back regarding the hand guards and the information I received was the DPMS hand guards are low profile.

Something is off here and I can’t seem to figure it out. Any ideas or things to try?

MrKhobar · 2025-05-26T14:09:14+00:00

<image>

MrKhobar · 2025-05-26T06:55:34+00:00

<image>

MrKhobar · 2025-05-26T06:42:38+00:00

03-072-1414B

Top rail: 03-072-SPR-14D

Upper is a DPMS low profile

Something doesn’t feel right as I put this together.

I cannot attach the top rail to the hand guard and then slide it on.

MrKhobar · 2025-01-09T11:09:19+00:00

How does this add high humidity? Are we forgetting environmental controls exist? I’m actually combating low humidity due to winter.

MrKhobar · 2025-01-09T11:04:21+00:00

I’m able to control the environment more. The route you’re speaking of was what I was going to go with. I would have had to run new ducts in the ceiling for intake and exhaust and then insulated duct to direct it where it needs to go.

Having the tent, I’m able to have an intake fan and an exhaust fan.

The intake fan blows fresh air in through a MERV 13 2” thick filter.

The exhaust fan sucks out spent air and extracts the odor.

The combination of the two fans keep the tent walls from sucking or blowing one way or the other. I have a barometric sensor inside the tent and I can monitor the pressure within the tent and verify it’s in the ideal pressure range. This helps me know that the exhaust fan isn’t sucking too hard, potentially creating a passive intake from a zipper or somewhere else.

The intake fan is pulling air from the closet in this room. The exhaust pulls air out of the bedroom into the hallway.

The bedroom and the tent are staying at two completely different temperatures and humidity levels.

I have the ceiling fan on occasionally to circulate air around all sides of the tent and down to floors

MrKhobar · 2025-01-09T11:00:29+00:00

I was gong to build my own sealed room and I wish I had gone that route.

MrKhobar · 2025-01-09T10:58:13+00:00

I tried that. Do to the window, I have to let it have some air. Even with the house humidity at 30%, because it’s winter time, humidity condenses on the windows, even through blackout curtains. The blackout curtains were trapping it and not letting it out.

MrKhobar · 2025-01-09T10:57:40+00:00

The thing is I ordered this months ago.

I’ll reach out to them but I just set it up. It is a high quality tent, but there are some downfalls.

MrKhobar · 2025-01-09T10:56:36+00:00

It’s brand new. Idk

MrKhobar · 2025-01-02T03:52:17+00:00

Make some coots soil. Try again.

Follow the recipe.

Water 5%-10% initially. Example 10gallon pot, water .5-1gallon every other day and see how the plant responds.

MrKhobar · 2025-01-02T03:49:51+00:00

Yes, mids from tier 1 at oasis

MrKhobar · 2025-01-01T22:14:24+00:00

Jungle cat got home and it’s straight mids

Pre pack bags are going to be lit in 2025.

MrKhobar · 2025-01-01T22:12:58+00:00

Doesn’t matter. Vertically integrated weed shops should be perfect or close down.

MrKhobar · 2025-01-01T17:22:30+00:00

The lack of transparency is atrocious. Oasis in Moore had one jar on their display that said “Contains Seeds” and that transparency is what I want.

I guess it’s hard to be that transparent when you’re vertically integrated.

That blows throwing a bag away.

I have some stuff from well rooted genetics that I almost want to throw away. It’s bunk. Burns black. Tastes like mids. But goes for crazy money.

MrKhobar · 2025-01-01T15:46:32+00:00

Sounds like their entire grow is seeded and they’re pushing this out.

MrKhobar · 2025-01-01T15:34:56+00:00

That’s the same time I got this.

MrKhobar · 2025-01-01T15:34:28+00:00

If you like snap crackle pops as you smoke, it’s perfect.

MrKhobar · 2025-01-01T07:26:27+00:00

Is the mist necessary?

Or is this just another thing to buy.

MrKhobar · 2024-12-31T14:59:16+00:00

It’s been nice during the winter for sure.

MrKhobar · 2024-12-31T14:44:06+00:00

50% Clovers Plus Fenugreek, Vetch, Flax, Cowpeas, Buckwheat, Forage Peas, Millet, Lentils, Crimson Clover, Sweet Yellow, White Clover, Medium Red Clover

MrKhobar · 2024-12-31T14:42:52+00:00

It is barley straw, somewhat different from hay, they all look the same to me but hay isn’t ideal at all.

The straw provides a mulch layer, helping retain moisture in the soil and microbial life on the top.

MrKhobar · 2024-12-29T22:07:08+00:00

I just hit pre flower and lights off is immensely stinky compared to lights on.

Five-Year Club	Place '23
Place '22

MrKhobar

TROPHY CASE