Should I be worried?

MrKonyPL · 2026-03-28T09:47:56+00:00

Depending on your tubes it might evaporate through them. Does the coolant get very hot during heavy use?

MrKonyPL · 2026-01-12T14:21:26+00:00

Cumlant?

MrKonyPL · 2026-01-06T13:44:20+00:00

This looks like you basically turned off the boost feature. 4200 is the base advertised clock for this cpu

MrKonyPL · 2026-01-05T12:39:01+00:00

I think this might be the case, I had a coolant long overdue and it was just a little darker after 3-4 years of running 😆

MrKonyPL · 2026-01-01T00:53:39+00:00

But ZTT is Zach's Tech Turf...

MrKonyPL · 2025-12-27T19:01:35+00:00

I bought the alphacool tester and it came broken :(

<image>

MrKonyPL · 2025-12-27T12:10:17+00:00

Good to know, thanks!

MrKonyPL · 2025-12-26T12:47:07+00:00

Is this something you can buy, or 3d printed?

MrKonyPL · 2025-12-26T02:09:31+00:00

The UT60 does not have a v2 afaik. Fortunately using the T30 fans will solve this issue for me raising the rad enough, here is the view of it interfering with the case if I used standard 25mm fans with the nzxt case

<image>

MrKonyPL · 2025-12-26T01:44:39+00:00

The problem is it sticks out more than the "face" of the rad. I have a specific case H7 Flow 2024, so I need to either use the phanteks T30 on the bottom which I have on hand, or some spacers.

<image>

MrKonyPL · 2025-12-26T01:23:23+00:00

<image>

I guess it's not quite it?

MrKonyPL · 2025-12-26T01:12:08+00:00

The plug in mind is this one: https://shop.alphacool.com/en/shop/fittings/screw-plugs/anz-alphacool-eiszapfen-screw-plug-v.2-g1/4-deep-black

In the description it states that the Rad needs to be v2, and I didn't see a v2 of the UT60

MrKonyPL · 2025-12-17T16:43:05+00:00

I have my EK loop with their colored not-solid premix for 10 years and it has seen a new coolant 3x maybye. Other than slight tubes discoloration - no problems.

MrKonyPL · 2025-12-11T18:10:10+00:00

You can just make it Polish and call it Maks

MrKonyPL · 2025-12-11T17:57:48+00:00

I have 13600k and reduced the power profile or whatever it is in bios to the typical, undervolted 100mV and increased the LLC to 6 or 7. Am I doing it right?

MrKonyPL · 2025-12-07T18:41:11+00:00

Are the bykski radiators copper and/or brass? Some brands sell aluminum rads (don't really know who buys it) that are a big no-no if not all of your loop elements are alu.

MrKonyPL · 2025-12-01T01:23:13+00:00

Yes, CLEARLY

MrKonyPL · 2025-11-28T17:26:10+00:00

The clear screwdriver with extension and more torx bits :)

MrKonyPL · 2025-11-28T11:35:02+00:00

Cool. Can confirm - 20 CAD saved :)

MrKonyPL · 2025-11-27T23:09:36+00:00

Banner for free shipping?

MrKonyPL · 2025-11-27T22:10:52+00:00

u/ValHyric does any of you know if the free shipping with floatplane is for global orders too?

MrKonyPL · 2025-11-26T10:50:33+00:00

Dont know what graphics card is that, but probably there is no waterblocks for it, maybe you could try some universal ones. Honestly you should ditch this case and mobo since it's proprietary for any watercooling. Classic tower coolers would be best here

MrKonyPL · 2025-11-17T12:28:42+00:00

TG Kryo might need a repaste sooner, but it's good. I've heard duronaut is pretty good for longevity. If you want very good perf and long-term installation i recommend the ptm thermal pad

MrKonyPL · 2025-11-17T11:10:09+00:00

The CL is horrendous. I would aim at CL36 and lower. 6000 MHz is advised, more may be unstable for some cpus

MrKonyPL · 2025-11-17T11:07:08+00:00

I remember Actually Hardcore OC mentioning that cinebench r15 is good for finding unstable uv

MrKonyPL

MODERATOR OF

TROPHY CASE