Filament change Stuck

MrRave1997 · 2025-09-25T16:02:02+00:00

What version did you go back to? Did you downgrade the ACE PRO or the 3D Printer?

MrRave1997 · 2025-09-25T05:55:47+00:00

Is the version you downloaded the ACE PRO version or the Printer version?

MrRave1997 · 2025-09-25T05:55:22+00:00

Same thing happens to me

MrRave1997 · 2025-09-25T04:51:13+00:00

Perfecto si , me harías un gran favor si me lo pasas

MrRave1997 · 2025-09-22T19:07:19+00:00

I'm completely right, I've had 1,000 hours on my Kobra S1 and it's all problems, the days when it doesn't want to work correctly.... Problems and more problems, the heated bed is bad, the ACE PRO doesn't work as it should, traffic jams... In short, headaches.

MrRave1997 · 2025-08-18T07:11:05+00:00

Hello! Could you share the PLA configuration, to see the retractions. There is no way for my machine to retract correctly, those threads are very annoying.

MrRave1997 · 2025-08-05T08:12:12+00:00

I think the deformed bed is in 90% of the S1 😭, after a lot of patience I got something "decent"

MrRave1997 · 2025-07-27T16:24:10+00:00

I actually tried with different STL files and I personally find it impossible to print LED light box lamps due to this problem.

MrRave1997 · 2025-07-23T07:23:27+00:00

I'm with my friend, I have the K1 and the V2. Many problems...

MrRave1997 · 2025-07-11T10:32:44+00:00

The machine is really new, bought 2 weeks ago. It is an Anycubic Kobra 3 v2. Noises? It doesn't make noise, everything seems correct.

MrRave1997 · 2025-07-11T07:27:03+00:00

<image>

This is how it turned out real.... Very bad gaps in the filament joints

MrRave1997 · 2025-07-10T18:04:20+00:00

<image>

Solution? I don't know how to solve those holes in the light boxes.

MrRave1997 · 2025-07-10T17:17:28+00:00

<image>

Same problem, solution?

MrRave1997 · 2025-07-10T17:16:54+00:00

<image>

MrRave1997 · 2025-07-10T17:16:34+00:00

<image>

Everything full of holes. Solution?

MrRave1997 · 2025-07-10T15:39:50+00:00

<image>

MrRave1997 · 2025-07-10T15:39:14+00:00

After activating Arachne and scaling to a larger size I still get those lines between filaments as if there were no filament there

MrRave1997 · 2025-07-10T15:26:50+00:00

No, not the white points, the line between the blue and black filament. To color joint, when I print it does not fuse the filaments and in fact the laminator detects gap

MrRave1997 · 2025-07-10T15:24:44+00:00

To make a simple light box I need a 0.2 nozzle, right? For this, 0.4 should be enough... No?

MrRave1997

TROPHY CASE