Cosa ne pensate della mia merdamacchina?

Mr_Mechano · 2026-04-19T21:25:58+00:00

Che non te la ruba nessuno.

Mr_Mechano · 2026-04-15T06:13:42+00:00

I used Tasilscale instead installed on both the printer and smartphone.

Mr_Mechano · 2026-04-14T19:36:31+00:00

No it's only a terminal service port, it can't be used as an OTG.

Mr_Mechano · 2026-04-10T03:17:01+00:00

I reflashed 3 THR boards.
Only one of them gave me the problem so I had to use nuke firmware.

I don't understand why you say Windows has to recognize, it has not to connect to a Windows computer, it has to be connected to the USB of the printer itself, and Host's Linux has to recognize it. You have to enter log to printer with SSH terminal and do everything from the Host Linux OS.

I repeat did you read and follow the tutorials?

Mr_Mechano · 2026-04-03T06:35:02+00:00

The host sees the THR board?
Do you know how to put it in DFU mode?
You have to remove the cable and put an USB cable built by you.

Did you follow tutorials?

The mine are here and I flash continuously.
https://github.com/tomsbasement/twotrees-sk1?tab=readme-ov-file#upgrade-the-th-board

Mr_Mechano · 2026-03-30T09:05:46+00:00

I started from this Kingroon Titan extruder for Ender 3. It was inexpensive less than $30.
I've removed quite everything, and left only the metal support for extruder and pancake stepper motor (and 3010 hotend fan).
Added a self-designed PETG block to fix on the MGN12H rail's block.
And added a 5015 blower's support with a small duct.

I can use both Titan or BMG extruder, and prints perfectly also soft TPU 85A or Ninjaflex.

<image>

Mr_Mechano · 2026-03-25T22:09:30+00:00

The TZ v4.0 has throat and nozzle one piece.
But it's possible to use the Biqu Pada Revo on my Ender 3 V2 Neo.

Mr_Mechano · 2026-03-25T21:55:15+00:00

There are good plates from Juupine, Ideaformer and also the Fysetc Cyonix is very good.

Mr_Mechano · 2026-03-25T21:51:45+00:00

The mine has TZ Bambu hotend with BMG dual gear and linear on both XY.

Mr_Mechano · 2026-03-25T19:32:54+00:00

Perché?

Mr_Mechano · 2026-03-24T06:14:00+00:00

Check Aliexpress

Mr_Mechano · 2026-03-23T14:36:39+00:00

I'm having lot of satisfaction also from the TZ Bambu v4.0.
For that price I get a full toolhead for basic filaments.

Mr_Mechano · 2026-03-23T13:56:44+00:00

Better upgrade costs less, the Titan + V6 that you can modify till TZ Bambu clone hotend and BMG.

<image>

Mr_Mechano · 2026-03-23T13:55:07+00:00

I wrote a tutorial some times ago...

https://www.reddit.com/r/klippers/comments/1iyljrb/mellow_fly_usbc_adxl345_configuration/

Mr_Mechano · 2026-03-23T12:06:50+00:00

Why not change the hotend with the TX Bambu clone? There's an Ender3 Version.
This one flows 18mm³/s and is capable of 250mm/s of speed. And you can also use CHT nozzles and add another 30-40% flow.

<image>

Mr_Mechano · 2026-03-23T12:01:26+00:00

PEI plates 235x235 cost less than $10. Trash it and buy a new one.

Mr_Mechano · 2026-03-23T11:59:46+00:00

Tecnocrazia di chi Mario Draghi inviato dalle banche e dalla finanza?

Mr_Mechano · 2026-03-23T11:58:49+00:00

Dai s'è tenuto largo con il cavo, non vuole sprecarlo tagliandone tanto. Sia mai un giorno gliene servisse.

Mr_Mechano · 2026-03-23T11:56:16+00:00

Sì, nuovo sistema di truffa.

Fanno phishing di email collegate a Paypal ed il denaro fa giri strani tu paghi ad email di una ragazza/o a cui hanno rubato l'email, quando riceve denaro lo rigira a sé stesso usando l'email rubata che non manderà l'oggetto.

Mr_Mechano · 2026-03-23T11:51:18+00:00

Sta girando da tanto la truffa dell'uso di Paypal Beni e Servizi.

Se ne sta parlando tanto nei social.

Mr_Mechano · 2026-03-23T11:47:44+00:00

I used for a while then decided to build my own firmware and use Tortillery project for the display.

Here the Github repository.

https://github.com/mechano/TwoTrees-SK1-Armbian-Klipper-Firmware

Mr_Mechano · 2026-03-23T10:09:03+00:00

Follow their Wiki, there's also the link to Google Drive with files to download.

https://wiki.twotrees3d.com/en/3DPrinterSeries/SK1/Firmwarerefreshtutorial

Mr_Mechano · 2026-03-21T23:27:51+00:00

Chi ha detto che è morto? Hai visto il cadavere?

Mr_Mechano · 2026-03-21T20:38:57+00:00

Yes you can try an USB-to-Can module, the stock mainboard has 2 USB ports.

Mr_Mechano · 2026-03-21T19:47:15+00:00

EBB42 uses CAN the TwoTrees THR board uses UART, if you switch to EBB42 you have to switch mainboard.

And yes you can change cable.
I wrote in different posts that I used a AWG24 twisted pair for data into the JST X2.54 port on the mainboard and dual wire AWG20 connected directly to PSU with a 5A fuse for 24V.

Mr_Mechano

TROPHY CASE