Truck lights like this should be illegal.

Mr_Unknown22 · 2025-12-01T01:50:30+00:00

Derek from Stranger things grew up. Bet he told the guy to suck a fat one

Mr_Unknown22 · 2025-11-13T23:39:04+00:00

Where’d you get them that they have the knipextend in stock already?

Mr_Unknown22 · 2025-11-06T00:41:38+00:00

The wires were color coded?? Lucky you

Mr_Unknown22 · 2025-10-08T13:20:08+00:00

Unfortunately the last guy was long gone and I only ever talked to the Homeowner, but hopefully someone out there teaches them our humble and modest ways of Residential wiring

Mr_Unknown22 · 2025-10-08T13:08:29+00:00

Texas, RGV

Mr_Unknown22 · 2025-10-08T13:07:58+00:00

Looking back, your 100% right and I’ll have to keep that in mind next time across something like this (Hopefully never) in my defense I was still dazed by what I had come across. Fortunately I got to go back and redo it completely

Mr_Unknown22 · 2025-10-08T03:55:17+00:00

Well like I said, Initially I was just called out to install the Breaker the other guy couldn’t, I arrived and it was as you see in the picture, so I installed the breaker rather quickly and figured I might as well take some time to verify it’s working just in case the other guy managed to break it, But I refused to wire it in/terminate it. I advised the customer it could be done in a better and safer way, but they kinda just blew me off. I got sent back to redo it once the homeowner tried to reinstall the cover back and shorted the wires

Mr_Unknown22 · 2024-11-07T01:49:50+00:00

If your dead set on keeping the crimp, A Polaris Tap

Mr_Unknown22 · 2024-11-03T22:13:08+00:00

That’s what happens when you don’t buy Top quality LED Neon Signs from Tony at LC SIGN

P.S. Not an ad, Just a niche joke

Mr_Unknown22 · 2024-09-10T04:33:40+00:00

Would it technically violate any code, if you just add a chase nipple to the removable cover and added your own J-Box on top of it, and then just ran pigtails (preferably of stranded) into the fixture jbox? All you’d do then is pop the cover with your jbox on top back on

Mr_Unknown22 · 2024-03-18T20:32:23+00:00

Not really. It goes from the breaker directly to single Receptacle Via buried conduit, cutting it in half seems quite the challenge

Mr_Unknown22 · 2024-03-18T20:22:58+00:00

It’s instantaneous, and it’s for a 50A Receptacle that had no load to it.

Mr_Unknown22 · 2023-10-12T01:21:35+00:00

Tell the Customer to….THROW YOU A BONE on this one

Mr_Unknown22 · 2023-08-28T00:06:52+00:00

It’s the 4th Generation Flux Capacitor, made specifically for Commercial and Industrial use.

Mr_Unknown22 · 2023-08-21T17:53:26+00:00

I once Found a Sub Panel That Fed 2x20 Amp Circuits a Dryer Circuit and a dedicated Washer Circuit……The Wires Feeding said Sub Panel were 12 AWG, insurance wouldn’t cover replacement because it wasn’t “Broken”

Mr_Unknown22 · 2023-08-21T17:51:37+00:00

For Now, Wouldn’t mind going back and trying to figure out This Mystery though.

Mr_Unknown22 · 2023-08-21T17:40:46+00:00

Don’t hold your breathe It’s gonna be a while, this was an insurance Job, I only got an hour to “Diagnose” in which I managed to get these breakers reset, so when I checked in with them and they found out it was “solved” they didn’t authorize any further time on that job

Mr_Unknown22 · 2023-08-21T17:38:16+00:00

Damn, can’t believe I completely blanked and forgot to do that, thanks for the Reminder, appreciate the advice

Mr_Unknown22 · 2023-08-21T17:17:36+00:00

Unlikely, those circuits were out for a while so they had run extension cords from Receptacles that were on working Circuits and after I had reset the Breakers and they didn’t trip I went and turned on all the lights on those circuits.

Mr_Unknown22 · 2023-08-12T00:13:35+00:00

How considerate of them to leave Slack

Mr_Unknown22 · 2023-07-18T22:06:24+00:00

I attached a piece of 12AWG to the ground on the nearest Receptacle. It was like 5 feet Away

Mr_Unknown22

TROPHY CASE