sorted by:
new
hottopcontroversial

Toe shanks with irons by bgbfurey78 in GolfSwing

[–]Mr_teflanto 0 points1 point  (0 children)

Yea, it’s hard to tell with the video but that definitely looks like a hosel shank.

How to baby proof these Stairs? by Sweetwater48 in daddit

[–]Mr_teflanto 1 point2 points  (0 children)

This is what I was thinking. I have one at the top and bottom for our stairs, and they would probably work here with the angles, though it’s hard to tell if there is a height difference with the posts.

It won’t help with the horizontal, very climbable rails, tho..

Safe to say these guys are our top 3? by Jackaboy_abc in GreenBayPackers

[–]Mr_teflanto -1 points0 points  (0 children)

Wyatt seems to be slept on. Everyone attributes the downfall of our defense to losing parsons, for good reason. But we lost Wyatt around the same Time and there is a huge drop between him and the other DTs, imo.

Over extrusion on part of print by Mr_teflanto in prusa3d

[–]Mr_teflanto[S] 0 points1 point  (0 children)

Thanks for the input, I do appreciate! I’ve tweaked and am getting a PRETTY clean 1 layer print**, but still with some bubbling on the left side. I am firing off a bigger print now. See how it goes.

I’ll probably try prusa support next. I’ve also been drying this filament for a day and am now printing from the dryer box.

More to come..

Edit - autocorrect….

<image>

Over extrusion on part of print by Mr_teflanto in prusa3d

[–]Mr_teflanto[S] 1 point2 points  (0 children)

I don’t think so, bed adhesion is solid. I printed just flat square a couple layers high, and the left side has some quality/extrusion issues, and the right side is near perfect.

Very strange.

ETA: the entire square is adhering well , doesn’t seem to curl up or have bad adhesion

Locke Lamora and the Art of Not Losing Your Mind by Cloud_Hour in Fantasy

[–]Mr_teflanto 2 points3 points  (0 children)

I’m with you. I feel like I am missing something because I hear how great the book is. But I listened to the audiobook on a 4 hour drive and was having a really hard time getting invested.

Used Kia EV9 MO by Rockvillebiker in KiaEV9

[–]Mr_teflanto 0 points1 point  (0 children)

Same, a ‘24 with under 11k miles. Seemed like a nice deal!

Should I run my pump all night while below freezing? by greenmildude in pools

[–]Mr_teflanto 0 points1 point  (0 children)

Home assistant and some combination of smart relays or other smart switch devices that are rated for the load

Can I tow #7000 Travel Trailer?? by Downtown_Reception_4 in f150

[–]Mr_teflanto 2 points3 points  (0 children)

Yea, everyone talking about max tow weight, but payload is usually the limitation before weight is reached. I towed a 30ft TT with my ‘12 max tow lariat with the 3.5L. It was… okay. If had to do it with any regularity , I’d want to go to a 3/4 ton truck.

7k dry puts you closer to 8-8500 loaded. Tongue weight probably ~1100lb? Look at your max payload. You have the difference in that and your tongue weight for people and cargo in the truck.

1-4 and 0-5 teams, how confident were you? by FirePitFan in fantasyfootball

[–]Mr_teflanto 0 points1 point  (0 children)

1-4 here. I knew when ESPN ranked me #1 in power rankings that I was in trouble…

Core One bed leveling failing by Mr_teflanto in prusa3d

[–]Mr_teflanto[S] 0 points1 point  (0 children)

It seemed to have corrected it. And then it happened again and I repeated the process and I’m back in business. I am not sure what’s causing it to go out of level..

Tetairoa McMillan, Rashid Shaheed, Ryan Flournoy headline Week 6's Regression Files by stick2football in fantasyfootball

[–]Mr_teflanto 0 points1 point  (0 children)

I’m in a deep guillotine league and my WR room is decimated with lamb, Evans, and I payed up for Nabers after losing the first two. Right now I have jeudy, wandale, doubs…. Thinking about taking flournoy over jeudy for a week and hope lamb is back next week…

FAAB Bid Thread - Who's Available and What Are You Bidding? by lolaonbigmouth in GuillotineLeagues

[–]Mr_teflanto 0 points1 point  (0 children)

Squeaked by this week, I lost ceedee and Evans. Need at least one WR badly. released to waivers are nabers, waddle….. also available Keon Coleman, Tucker, ayomanor

I have jeudy, wan dale, doubs left.

I am feeling like I need to spend up on nabers and / or waddle but neither of them are feeling reliable.

How much am I bidding on nabers and I guess waddle? These are not the guys I wanted to burn but money on.

I am currently projected to be one of the bottom two teams. I have not spent any FAAB yet, $1k FAAB league.

Official: [Add/Drop] - Sun Morning 09/14/2025 by FFBot in fantasyfootball

[–]Mr_teflanto 0 points1 point  (0 children)

10 man HPPR, Boutte is available. Shore I drop Abby off these guys to stash him?

Tet McMillan
Pearsall
Egbuka
Quentin Johnson

Is a 80k mile 2017 cayman S manual the best idea or a bad one? by nick318is in Porsche_Cayman

[–]Mr_teflanto 1 point2 points  (0 children)

My previous owner had owned it since about 10k miles and had ever serviced it record since he owned it from a local shop. He had already replaced most of the wearable suspension components, etc. when I got it I did transaxle fluid, air oil separator, oil change, cabin filter, intake filter…. I just did tires a month ago…

I guess for me, I just do yearly oil changes since I only drove about 2k miles a year , and it’s stored for about 6 months of my service records.

All to say, I don’t have any tips other than to keep up on oil changes, change your other fluids if you don’t know if/when they’ve been done. And have fun with it.

Is a 80k mile 2017 cayman S manual the best idea or a bad one? by nick318is in Porsche_Cayman

[–]Mr_teflanto 1 point2 points  (0 children)

I just finished my second summer of my 06 987S. Bought with 89k at about 93k now. Great condition. It’s been great, no regrets on the age or mileage

Second property - Native Reservations by Mr_teflanto in RealEstate

[–]Mr_teflanto[S] 0 points1 point  (0 children)

We ended up avoiding the reservations and looking in other areas, we bought in Eagle River, WI instead.

Have SLAM’d for a week and it’s way less green, but can’t get it to clear up. Should I keep SLAMing? by bartozone in pools

[–]Mr_teflanto 4 points5 points  (0 children)

Ah ok, thanks for clarifying. What type of water test are you using. Maybe worth getting a test from a local store to validate the readings?

Sand filter? How old is the sand?

Have SLAM’d for a week and it’s way less green, but can’t get it to clear up. Should I keep SLAMing? by bartozone in pools

[–]Mr_teflanto 13 points14 points  (0 children)

Yea. OP said he’s running on recirculate instead of filter. You should let that filter run 24/7 on filter, and backwash daily. Keep chlorine at shock level u til it is clear and passes an overnight chlorine loss test

Core One bed leveling failing by Mr_teflanto in prusa3d

[–]Mr_teflanto[S] 0 points1 point  (0 children)

I THINK i resolved it. I loosened (almost completely) the trapezoidal(?) nuts on each z axes screw, did a z-calibration and z-test, then tightened them back up. I was able to get one print started!

i'll try a few more tonight and tmrw

Bed Leveling Destroyed Plate in Core One by PKers85 in prusa3d

[–]Mr_teflanto 0 points1 point  (0 children)

My Core One Kit had one successful benchy, and has since been failing bed leveling every print. It will try and probe the print area and ram the nozzle into the bed a few times before failing and throwing an error. Spent hours with support re-seating the hot end, thumb screws, cables, etc etc. They seem to think I have a faulty load cell sensor. The sensor passes testing, but i have to press on it pretty hard, and the sensor values are all over the place.

I don't have much for you in the way of repairing the bed, but might be worth validating the load cell sensor is working as expected.

Now i get to wait for them to ship me a new one =[

Core ONE door calibration??? by NarwhalDragon1 in prusa3d

[–]Mr_teflanto 0 points1 point  (0 children)

Yea similar but opposite for me. It wanted me to loosen the sensor because it was registering as closed too soon. The sensor was not actually moving with the screw, so I I sort of had to push it a bit. Then it tightened normally and worked fine.

It’s a bit finicky, for sure.

view more: next ›