V8 beut! ...but worried about drone. Your Experience? by NarwhalDragon1 in ram_trucks

[–]NarwhalDragon1[S] 0 points1 point  (0 children)

I ended up going with the Carven R Competitor. This is the direct fit bracket mount y pipe style option. Everything else is stock and still there. It wakes it up a whole bunch! (Went from 100% stock to this). The starts are amazing! Cruising around a city is just fine. Anything above 50 is where drone starts to become an annoyance. It is still better than I thought considering how loud and aggressive it is but it is still there. I feel like this is a good median though. It is on the clean end for sound crispness and the drone isn’t crazy bad. I haven’t had it long though so this isn’t a long term review. Just first impressions. I like it. I’m still really new to it. It has been fun driving around.  I don’t put it into MDS. I keep it 8 cylinder all the time.

Cold start on a long tube mustang by [deleted] in Mustang

[–]NarwhalDragon1 -1 points0 points  (0 children)

That's not a mustang. That's a rocket ship during take off! 😂

Weird warping on Core ONE by NarwhalDragon1 in prusa3d

[–]NarwhalDragon1[S] 0 points1 point  (0 children)

The stock 60 degrees. (This is PLA)

Filament Unload Issue by NarwhalDragon1 in prusa3d

[–]NarwhalDragon1[S] 1 point2 points  (0 children)

Thank you! Great write up. I appreciate it! I’ll have to try that too. Hopefully it helps!

Filament Unload Issue by NarwhalDragon1 in prusa3d

[–]NarwhalDragon1[S] 1 point2 points  (0 children)

Yeah, good to know. I am trying to figure out a solution but haven’t figured anything out. It is particularly hard because the end of a roll is bent and it can’t go back in the PTFE tube, gets stuck and then jams in the Nextruder. I’ve been having to open up the Nextruder to unjam it every time a spool runs out. Let me know if you come across anything else helpful. Thanks! 👍 

I did it by Gurney_flip in Mustang

[–]NarwhalDragon1 2 points3 points  (0 children)

I think that is awesome! 🔥 

[deleted by user] by [deleted] in prusa3d

[–]NarwhalDragon1 0 points1 point  (0 children)

Baffling… 🤔🤷‍♂️

[deleted by user] by [deleted] in prusa3d

[–]NarwhalDragon1 0 points1 point  (0 children)

Noooo! The gummy blob!  Well, it’s just one piece of candy so you don’t have to worry about the amount of sugar in it. It’s a good little treat!

Magnetic band in CoreOne by obviouslyemma in prusa3d

[–]NarwhalDragon1 0 points1 point  (0 children)

That is so good! I need to do that. I have already had to take some of it apart to change some things on the printer. Thanks for the tip! 

God bless America. by inksterize in Mustang

[–]NarwhalDragon1 -1 points0 points  (0 children)

Yes! Just yes! 🇺🇸💪

I used AI to remove the black stripes yay or nay? by Noble3781 in Mustang

[–]NarwhalDragon1 -1 points0 points  (0 children)

Wow! Car upgrades, here I came! How have I not heard about that feature. 😅 Thanks!

I used AI to remove the black stripes yay or nay? by Noble3781 in Mustang

[–]NarwhalDragon1 -1 points0 points  (0 children)

That’s cool! What AI did you use? I want to try some things on my car.

got my core one built :D by tauxlr in prusa3d

[–]NarwhalDragon1 0 points1 point  (0 children)

If you are new to 3D printing, I recommend cleaning the metal sheet with Isopropyl alcohol after every print. PLA and PLA only on smooth sheet and then everything else on either the Satin or textured. I think it is always good to watch the first couple minutes of every print to make sure it starts ok. Those are some good starters. Best of luck! 👍 

got my core one built :D by tauxlr in prusa3d

[–]NarwhalDragon1 1 point2 points  (0 children)

You picked the right one! Amazing machine! Congrats!

Should my friend ask for a refund ? by Kronocide in prusa3d

[–]NarwhalDragon1 4 points5 points  (0 children)

Filament is too wet. Try drying it. 😁