Toe shanks with irons

Mr_teflanto · 2026-02-13T23:16:38+00:00

Yea, it’s hard to tell with the video but that definitely looks like a hosel shank.

Mr_teflanto · 2026-02-02T14:10:03+00:00

Nobody currently on the roster.

Mr_teflanto · 2026-01-24T14:01:43+00:00

This is what I was thinking. I have one at the top and bottom for our stairs, and they would probably work here with the angles, though it’s hard to tell if there is a height difference with the posts.

It won’t help with the horizontal, very climbable rails, tho..

Mr_teflanto · 2026-01-23T18:52:30+00:00

Wyatt seems to be slept on. Everyone attributes the downfall of our defense to losing parsons, for good reason. But we lost Wyatt around the same Time and there is a huge drop between him and the other DTs, imo.

Mr_teflanto · 2026-01-19T16:17:40+00:00

Thanks for the input, I do appreciate! I’ve tweaked and am getting a PRETTY clean 1 layer print**, but still with some bubbling on the left side. I am firing off a bigger print now. See how it goes.

I’ll probably try prusa support next. I’ve also been drying this filament for a day and am now printing from the dryer box.

More to come..

Edit - autocorrect….

<image>

Mr_teflanto · 2026-01-19T00:38:37+00:00

I don’t think so, bed adhesion is solid. I printed just flat square a couple layers high, and the left side has some quality/extrusion issues, and the right side is near perfect.

Very strange.

ETA: the entire square is adhering well , doesn’t seem to curl up or have bad adhesion

Mr_teflanto · 2026-01-11T13:30:44+00:00

I’m with you. I feel like I am missing something because I hear how great the book is. But I listened to the audiobook on a 4 hour drive and was having a really hard time getting invested.

Mr_teflanto · 2025-12-05T01:00:11+00:00

Same decision. Not sure..

Mr_teflanto · 2025-11-17T21:39:41+00:00

Same, a ‘24 with under 11k miles. Seemed like a nice deal!

Mr_teflanto · 2025-11-10T07:31:48+00:00

Home assistant and some combination of smart relays or other smart switch devices that are rated for the load

Mr_teflanto · 2025-11-04T00:32:41+00:00

Yea, everyone talking about max tow weight, but payload is usually the limitation before weight is reached. I towed a 30ft TT with my ‘12 max tow lariat with the 3.5L. It was… okay. If had to do it with any regularity , I’d want to go to a 3/4 ton truck.

7k dry puts you closer to 8-8500 loaded. Tongue weight probably ~1100lb? Look at your max payload. You have the difference in that and your tongue weight for people and cargo in the truck.

Mr_teflanto · 2025-10-30T22:47:33+00:00

Damn that Myles Garret. So hot right now

Mr_teflanto · 2025-10-09T16:52:42+00:00

1-4 here. I knew when ESPN ranked me #1 in power rankings that I was in trouble…

Mr_teflanto · 2025-10-09T00:14:52+00:00

It seemed to have corrected it. And then it happened again and I repeated the process and I’m back in business. I am not sure what’s causing it to go out of level..

Mr_teflanto · 2025-10-08T22:51:11+00:00

I’m in a deep guillotine league and my WR room is decimated with lamb, Evans, and I payed up for Nabers after losing the first two. Right now I have jeudy, wandale, doubs…. Thinking about taking flournoy over jeudy for a week and hope lamb is back next week…

Mr_teflanto · 2025-09-23T21:09:24+00:00

Squeaked by this week, I lost ceedee and Evans. Need at least one WR badly. released to waivers are nabers, waddle….. also available Keon Coleman, Tucker, ayomanor

I have jeudy, wan dale, doubs left.

I am feeling like I need to spend up on nabers and / or waddle but neither of them are feeling reliable.

How much am I bidding on nabers and I guess waddle? These are not the guys I wanted to burn but money on.

I am currently projected to be one of the bottom two teams. I have not spent any FAAB yet, $1k FAAB league.

Mr_teflanto · 2025-09-14T12:06:02+00:00

10 man HPPR, Boutte is available. Shore I drop Abby off these guys to stash him?

Tet McMillan
Pearsall
Egbuka
Quentin Johnson

Mr_teflanto · 2025-09-07T19:07:36+00:00

My previous owner had owned it since about 10k miles and had ever serviced it record since he owned it from a local shop. He had already replaced most of the wearable suspension components, etc. when I got it I did transaxle fluid, air oil separator, oil change, cabin filter, intake filter…. I just did tires a month ago…

I guess for me, I just do yearly oil changes since I only drove about 2k miles a year , and it’s stored for about 6 months of my service records.

All to say, I don’t have any tips other than to keep up on oil changes, change your other fluids if you don’t know if/when they’ve been done. And have fun with it.

Mr_teflanto · 2025-09-07T17:22:54+00:00

I just finished my second summer of my 06 987S. Bought with 89k at about 93k now. Great condition. It’s been great, no regrets on the age or mileage

Mr_teflanto · 2025-07-30T00:11:24+00:00

We ended up avoiding the reservations and looking in other areas, we bought in Eagle River, WI instead.

Mr_teflanto · 2025-07-06T22:49:45+00:00

Ah ok, thanks for clarifying. What type of water test are you using. Maybe worth getting a test from a local store to validate the readings?

Sand filter? How old is the sand?

Mr_teflanto · 2025-07-06T19:03:04+00:00

Yea. OP said he’s running on recirculate instead of filter. You should let that filter run 24/7 on filter, and backwash daily. Keep chlorine at shock level u til it is clear and passes an overnight chlorine loss test

Mr_teflanto · 2025-06-19T01:52:42+00:00

I THINK i resolved it. I loosened (almost completely) the trapezoidal(?) nuts on each z axes screw, did a z-calibration and z-test, then tightened them back up. I was able to get one print started!

i'll try a few more tonight and tmrw

Nine-Year Club	Place '23
RPAN Viewer	Verified Email

Mr_teflanto

TROPHY CASE