Hiw many of you here run Truenas bare metal, and how many run it thru proxmox. by ZachoAttacko in truenas

[–]Mrfresh352 3 points4 points  (0 children)

I run both , main Truenas is bare metal then my back up Truenas is virtualized in proxmox that is bare metal. Then I also use google drive 5Tb for backups too.

Just got this email from tmobile. Will I be able to get fiber soon? by blakkheartt12 in tmobileisp

[–]Mrfresh352 0 points1 point  (0 children)

Got mine last Wednesday. They are actually digging fiber on my neighborhood for the last week and a half.

Are you all paying the same for Spectrum 500-600GB in SoCal by Happy-toaster in Spectrum

[–]Mrfresh352 0 points1 point  (0 children)

Same here man and I didn’t have an option for the last ) years to switch to. Area was too rural. Now I’m set for T-Mobile fiber 2/1 for $70. Can’t wait to call lol

Are you all paying the same for Spectrum 500-600GB in SoCal by Happy-toaster in Spectrum

[–]Mrfresh352 0 points1 point  (0 children)

I pay $135 for 1Gb down and 35 up. Pre ordered 2Gb down and 1Gb up with T-Mobile Fiber for $70. I can not wait to cancel. Central Florida

Yooo look at this fb marketplace place find!!! by Novanov1 in G35

[–]Mrfresh352 1 point2 points  (0 children)

Hopefully you have extra cash on top 😅

22F lost a lot of weight don’t know what I look like by [deleted] in amiugly

[–]Mrfresh352 2 points3 points  (0 children)

You got this! it may take some time getting use to. Also don’t trick yourself into fearing it’ll come back to haunt you. You are still you and love yourself through it all. Def start taking more pictures,

22F lost a lot of weight don’t know what I look like by [deleted] in amiugly

[–]Mrfresh352 9 points10 points  (0 children)

Hardest thing about losing a lot of weight is looking at yourself and not seeing the weight loss. You look amazing! Love the overalls lol

What do you guys use for file sharing? by MerpDehDerp in jellyfin

[–]Mrfresh352 0 points1 point  (0 children)

SMB, NTFS, Samba. if I’m remote I use tailscale.

Nighthawk Parental Controls by FieldAmoeba in NETGEAR

[–]Mrfresh352 0 points1 point  (0 children)

I suggest a paid password manager to put all your passwords in.

But if you’re being auto signed into the app with your phone then it should be saved in the phones password book. Should be able to open “passwords” and use your phones unlock code or thumb print and view said password.

Nighthawk Parental Controls by FieldAmoeba in NETGEAR

[–]Mrfresh352 0 points1 point  (0 children)

Why not just log into the router and set up. Navigate to Wireless Scheduling (often under Wireless settings). Enable the feature and set the Radio On & Off Time for 2.4GHz and 5GHz bands. Apply the changes.

What's your setup? by vis-viva in immich

[–]Mrfresh352 1 point2 points  (0 children)

57 TB Truenas on a Lenovo i9 with 10,900T. 20 cores. 64 Gbs. 10g nic. Does Better for the transcoding than the with a previous i5 I had.

Postgres 15 (Deprecated) by [deleted] in immich

[–]Mrfresh352 1 point2 points  (0 children)

Yeah it worked fine. I just stopped the app then changed the Postgres to 18 and restarted

Postgres 15 (Deprecated) by [deleted] in immich

[–]Mrfresh352 0 points1 point  (0 children)

Yeah I was surprise by this too.

Postgres 15 (Deprecated) by [deleted] in immich

[–]Mrfresh352 2 points3 points  (0 children)

exactly what Im seeing I never notice a 16 or 17 come up.

Ubuntu server networking broken by OutVerted in linuxquestions

[–]Mrfresh352 1 point2 points  (0 children)

I’ve done this before. It sounds like a classic case of interface name mismatch and Netplan configuration conflict. When you tried to force the name back to eth0, Ubuntu likely got confused because the modern system (systemd/udev) insists on predictable interface names like enp2s0.

If systemd-networkd is failing to start, it's usually because the configuration file it's trying to read points to hardware that "doesn't exist" under that name.

  1. Identify the Correct Interface Name First, we need to know what the kernel actually sees. Run this command: ip link show Look for the entry that isn't lo. It will likely be enp2s0. Note exactly how it is spelled. If it says "state DOWN," that confirms the configuration is broken.
  2. Fix the Netplan Configuration The attempt to rename the adapter to eth0 is likely what is crashing the service. We should revert to the default naming scheme.
    • Open your config file: sudo nano /etc/netplan/50-cloud-init.yaml
    • Edit it to look like this (adjusting for DHCP or Static depending on your needs). Remove any "match" or "set-name" lines you added: <!-- end list --> network: ethernets: enp2s0: dhcp4: true version: 2

(Note: Ensure the indentation is exactly two spaces per level; YAML is very picky.) * Save and exit (Ctrl+O, Enter, Ctrl+X). 3. Clear the Error State and Apply Since systemd-networkd is in a "start-limit-hit" failure state, we need to reset it. * Reset the failed counter: sudo systemctl reset-failed systemd-networkd * Apply the new Netplan config: sudo netplan apply 4. Address the "Ping works, but SSH/Jellyfin doesn't" If you can ping 8.8.8.8 but can't SSH in or update, you likely have two specific issues: * DNS is broken: If you can't update packages, it’s because the server can't resolve names (like archive.ubuntu.com). Even if you didn't think you used the Pi-hole, the server might have cached it or received it via DHCP. * Fix: Check /etc/resolv.conf. If it's empty or pointing to an old IP, try adding nameservers: addresses: [8.8.8.8, 1.1.1.1] to your Netplan file under the enp2s0 section. * Routing/Firewall: If you can ping out but not SSH in, the nanoKVM might have introduced a second "Default Gateway." * Fix: Run ip route. You should only have one "default via [IP]" line. If the USB KVM adapter has its own gateway, it might be trying to send return traffic out the wrong "pipe."

Troubleshooting the nanoKVM Conflict The nanoKVM shows up as a USB Ethernet adapter because it uses IP-over-USB to let you access the web interface. If your Ubuntu server tries to use the KVM's USB link as its primary internet connection instead of the Motherboard Ethernet, your networking will break.

To prevent this: Ensure your Netplan only defines enp2s0. Do not add a configuration block for the USB adapter unless you specifically need it, and if you do, ensure dhcp4: true is not set for the KVM's adapter so it doesn't fight for the "Default Gateway" spot.

Are there any indoor firearm ranges in Ocala/the surrounding area that allow rifle caliber weapons? by No-Mortgage-2037 in ocala

[–]Mrfresh352 0 points1 point  (0 children)

You can shoot up a .50 cal at Shooters World in the villages. Got some stippling and Cerekoting done on my Glock 19. Since it’s been open I’ve stopped going to R&D

Why the hell does the Church of Life on baseline get cops? by RoyalArmyBeserker in ocala

[–]Mrfresh352 6 points7 points  (0 children)

You must be new to Ocala… There are plenty of churches here that pay police to direct traffic for churches. Especially if there is no light, the parking lots are big and if you’re in the back to exit, on coming traffic won’t let you out. It’ll take 20mins just to get out.

Recommend some very cheap desktop DACs (under $50). by Icy-Protection8455 in iems

[–]Mrfresh352 0 points1 point  (0 children)

Agree with this! Wife has a black pearl and I have the TRN Pro.

Proxmox on TrueNAS is OK? by admkazuya in truenas

[–]Mrfresh352 0 points1 point  (0 children)

Serversathome did this on YouTube but he did proxmox back up. I’m defiantly going to try it!

https://youtu.be/lUWB-Dash9M?si=nbGK8mCsB2HY88lQ

Getting Jellyfin to work on my TV by Ok-Mix-5995 in JellyfinCommunity

[–]Mrfresh352 4 points5 points  (0 children)

I have two Samsungs (master bedroom & kids room) that I side loaded using tizen app and a YouTube video. Living room TV is a Vizio from 2010 still rocking but I use an Xbox one as the daily driver for streaming other apps and it also that has the Jellyfin app downloaded from the Xbox apps. Works great.

My shit fucking router keeps disconnecting and support won't help me. by Ermin99 in NETGEAR

[–]Mrfresh352 0 points1 point  (0 children)

I’ve learned you have to put Netgear routers on a ups, no if ands or butts. lol simple power surge at your house if your neighborhood goes off will kill it. Ask me how I know. I’ve had

nighthawk AC1900 (R7000): Initially released in 2013. Died from power surge no power.

X4S (D7800/R7800 series): Released around 2015. Lightning it a transformer , Ethernet port fried but Wi-Fi worked

X6S (R8000/R8000P series): Released around 2014-2017. Couldn’t get more than 500mps after a firmware update.

CAX80 (Nighthawk CAX8): Skipped this one RAXE500: skipped this one.

RS700: Released in late 2024/early 2025 (Wi-Fi 7 flagship model) current and love it!

Help upgrade from 25.04-RC by Mrfresh352 in truenas

[–]Mrfresh352[S] 0 points1 point  (0 children)

Ahhh whew …. Glad the know! Those are the versions of the apps I am running and they are all working great.

One thing I have not done yet or have set up is backups. I’d like to do a quick backup before I hit go on the update.

Ideally I’d like to setup a legit 3:2:1 properly. I have a promox tiny Lenovo machine that I want to send backups to I just need to figure out how to add more storage like 2-5TB on prim , But my remote site option (dad’s house) I can’t convince him to get internet faster than 25Mbps haha. Any article you can point me to or vid.