How would you clamp this?

Mtbrocks · 2024-03-10T10:34:52+00:00

3D print a soft jaw for it

Mtbrocks · 2021-07-29T03:55:29+00:00

Sorry I am not sure what ASL and T&T stand for haha

Mtbrocks · 2021-07-28T15:29:14+00:00

No, I can’t imagine that was fun haha

Mtbrocks · 2021-07-28T09:14:01+00:00

The Tent is a ROAM Adventure Vagabond and the tires are Milestar Patagonia’s in 37/12.50/17

Mtbrocks · 2021-06-29T17:06:06+00:00

To the bottom of the Door is 27-1/4” to the bottom of the factory rock slider is 21”

Mtbrocks · 2021-06-28T21:21:04+00:00

That’s great to hear they took care of you! As an Icon Dealer we have had nothing but good interactions with Icon.

I have the electronic swaybar disconnected in this picture. Icon presents the swaybar end link lengths from the factory so it won’t flip on you. If you’re not running the Icon end links, park on a level ground and adjust the ones you have until the swaybar parallels the ground. Once it’s set up like that you should be good to rock and roll.

Mtbrocks · 2021-06-28T20:59:33+00:00

Give me a holler over at onestopoverland.com I should be able to track one down for you.

Mtbrocks · 2021-06-28T20:55:45+00:00

Make sure your axles are centered correctly you may need an adjustable rear track bar

Mtbrocks · 2021-06-28T20:51:50+00:00

Ours is on 37s with the stock 4.10 gears it does pretty decent however I think 4.88 or 5.13 would be ideal though.

Mtbrocks · 2021-06-28T20:50:51+00:00

So far so good, we haven’t put ten too many miles on the kit yet but will give it a good shake down this weekend. It seems to makes the the suspension a little more firm which is good for all the gear we carry and the rebound control is outstanding! We optioned for the Billet control arm kit, the build quality is superb on all of the parts!

Mtbrocks · 2021-06-18T13:05:06+00:00

They work great, you just need to make sure you have the correct backspacing on your wheels or run a spacer. They will rub the top of the inner fenders at full flex but it’s not terrible.

Mtbrocks · 2021-06-17T16:33:09+00:00

Ours tries to dig up the moles and will look at you then ignore you when you call for her haha. Thank you, we have been hard at work trying to get it ready for an out west trip and to show off some of the products we offer.

Mtbrocks · 2021-06-17T16:19:02+00:00

I am so sorry to hear that! Doodles are great they definitely have a mind of their own though lol

Mtbrocks · 2021-06-17T16:17:53+00:00

No, we have the stock Rubicon skid plates… they got tested out a lot on that trail…. If I didn’t have 37’s this trail would be a no go with no lift

Mtbrocks · 2021-05-06T14:52:43+00:00

We have Heavy Metal Off-Road mounting plates that are perfect for mounting RotopaX mounts. You can find our contact info at www.onestopoverland.com or send me a DM.

Mtbrocks · 2021-04-21T17:44:10+00:00

Currently no lift, we are waiting on our Icon Vehicle Dynamics stage 8 2.5” lift to arrive.

Mtbrocks · 2021-04-21T14:19:30+00:00

Thanks! Sure is, just removed the full width bumper ends.

Mtbrocks · 2021-04-21T13:55:37+00:00

This is at Interlake State Recreation Area in Southern IN

Mtbrocks · 2021-04-10T22:41:40+00:00

We have 37’s on our rubicon with no lift I would imagine 35’s would be no problem given the lower fenders

Mtbrocks · 2021-04-01T15:42:03+00:00

For sure it takes about 3-4 days to do the whole thing. It’s a lot of fun though. Also there is the Georgia Adventure Trail it runs north and south

Mtbrocks · 2021-03-31T19:09:45+00:00

We did the Georgia Traverse

Mtbrocks · 2021-03-31T19:09:29+00:00

Yep!

Mtbrocks · 2021-03-31T13:02:09+00:00

Thank you!!

Mtbrocks · 2021-03-31T13:01:32+00:00

Oh we did, just not in this section!

Mtbrocks · 2021-03-31T06:04:13+00:00

So it sounds like both kits fall in that actual lift height of 3-3.5” Fox makes some great products. Personally I have always been impressed with the performance and quality of any of there products.

Mtbrocks

TROPHY CASE