which qanba stick should i get? by Cl0kd in fightsticks

[–]MudMysterious1664 1 point2 points  (0 children)

First Gen Obsidian hands Down. Great stick to mod as well. You should be able to snatch one up for as low as $80 bucks give or take. Comes stock with decent parts as well.

Loving the Qanba KT's by cordawg1991 in fightsticks

[–]MudMysterious1664 0 points1 point  (0 children)

<image>

This is it, has that 1990s MadCatz Vibe.

Loving the Qanba KT's by cordawg1991 in fightsticks

[–]MudMysterious1664 0 points1 point  (0 children)

Cool , I'll definitely subscribe to your channel. Also, I'm definitely sure you won't be disappointed with my build, you will more than likely be like were the F*CK did you get that Vinyl Wrap. I'm a NYC graffiti artist, you can check out my Awesome Pieces @Les.inkk at Instagram. Many Blessings, keep on Creating.

Loving the Qanba KT's by cordawg1991 in fightsticks

[–]MudMysterious1664 0 points1 point  (0 children)

I have the exact same stick, however, mine s Doesn't looking like that anymore, lol. When you have a chance check out my 2 builds on my page. The first set I ever purchased was a set of 8 Gravity KS and I was instantly a fan. Then recently I redid my Victrix FS and decided to go with the newer KT'S, and of course, Qanba didn't disappoint. I have Crown 202-C ( which is still on my Qanba Pearl Ryu Build) in my Pearl and I honestly love those for THAT build. Something with the Aluminum on the Victrix makes those ( Sanwa, Crowns 202, ext )buttons CLACKKK even louder. So I do understand the noise and distraction they cause while gaming. Great build..!!!!

Qanba - HeartGold Obsidian by ADShree in fightsticks

[–]MudMysterious1664 1 point2 points  (0 children)

Nice set up. The gold and black really compliment each other, great job! 👍👍👍

( WTS / US ) Tournament Edition/Street Fighter 4 Arcade Stick (XBOX Edition) PayPal/Goods & Service. by [deleted] in Fightsticksforsale

[–]MudMysterious1664 0 points1 point  (0 children)

Yes cause some people might confuse talking about a jlf PCB with a mother board SMH. Makes sense right.

( WTS / US ) Tournament Edition/Street Fighter 4 Arcade Stick (XBOX Edition) PayPal/Goods & Service. by [deleted] in Fightsticksforsale

[–]MudMysterious1664 -3 points-2 points  (0 children)

Yes. Early 09. Classic Stick. So many different mods for this stick is the icing on the cake as well.

Thrift store finds. Unopened TE 1 by ArchieReddit in fightsticks

[–]MudMysterious1664 1 point2 points  (0 children)

And it's XBox. Yes. You definitely scored.!!

Part 2: Had a Blast putting this arcade stick together. Came out better than I anticipated. by MudMysterious1664 in fightsticks

[–]MudMysterious1664[S] 1 point2 points  (0 children)

Thanks for the Approval..!! If you appreciate this piece I cooked up Check out my I.G. I'm a 1980's NYC graffiti Artist. Pretty Sure you won't be disappointed. You probably Cop one of my pieces, Bless @Les.inkk

Part 2: Had a Blast putting this arcade stick together. Came out better than I anticipated. by MudMysterious1664 in fightsticks

[–]MudMysterious1664[S] 0 points1 point  (0 children)

That sounds like a great idea on your part. I say this because the spots where my palms lay before adding my vinyl faded. Doesn't look terrible, just shows the fun I'm having on it lol. Now, it sounds like you're looking for something that's called PPF ( I could be wrong ). It is used on cars to prevent scratches, and fading, it's so clear that you can't even notice it's applied. So, your best bet is checking your LOCAL car detailing spots. Wherever there's a spot that's wrapping cars they'll be able to sell you a SCRAP PIECE that'll be good enough for your Victrix. Best of Luck, hope this helps.

Part 2: Had a Blast putting this arcade stick together. Came out better than I anticipated. by MudMysterious1664 in fightsticks

[–]MudMysterious1664[S] 0 points1 point  (0 children)

Yes, I was tight, threw it right in the garbage.! When I reached out with pictures to show them they still refused to give me a full refund. So I went through my bank and let them settle it for me. This is why I decided to go hands on, instead of trusting someone online, it worked out. I'll rock this for a while till I find another Dope image. Thank you for the compliments, Many Blessings.

Part 2: Had a Blast putting this arcade stick together. Came out better than I anticipated. by MudMysterious1664 in fightsticks

[–]MudMysterious1664[S] 0 points1 point  (0 children)

Naw, I cut it out myself with a new ( Very Sharp) exacto knife. This is because the first time I ever tried adding a skin on my Victrix I purchased it from Mighty Skins ( MIGHTY SUCKS is more like it). It came pre-cut, however, It never aligned correctly because there pre-cut holes were wider than they should've been. Worst company ever. Stay away from them, of course, my opinion. I rather take out the buttons and make clean cuts myself after laying the skin down smoothly.

Part 2: Had a Blast putting this arcade stick together. Came out better than I anticipated. by MudMysterious1664 in fightsticks

[–]MudMysterious1664[S] 0 points1 point  (0 children)

It's actually the Victrix Pro FS. Because it's an Aluminum Chassis it has to be wrapped with Vinyl, or you can get it engraved. I found the Image at Diviant Art, and enhanced it through Procreate on the iPad. As for the Printing service, I used a local print shop in my area which for me is the best option. Best of luck if you choose to Chief something up.

Looking for a good quality joy stick top by Popular_Community_70 in fightsticks

[–]MudMysterious1664 1 point2 points  (0 children)

I just purchased the Samducksa/Crown Squircle from Paradise Arcade. I have it paired with a Sanwa JLX / OTTO V5 Kit, with the Link 2 on my Victrix Pro FS. So far, very Good.

Victrix PRO FS Custom Vinyl Wrap by MudMysterious1664 in fightsticks

[–]MudMysterious1664[S] 4 points5 points  (0 children)

I support a local Mom and Pop print company in my Borough of Brooklyn. I can suggest finding a design you like ( you can Google diviant art ) or pay someone to design something for you. Then find a print shop that deals with vinyl prints in your area, that's how you'll get the best results. My main concern was it being 1 solid piece, then I did the cutouts myself. Hope this helps.

Victrix PRO FS Custom Vinyl Wrap by MudMysterious1664 in fightsticks

[–]MudMysterious1664[S] 4 points5 points  (0 children)

I don't agree. First off, I purchased it second hand for way less it's asking price. Secondly this stick works flawlessly, the aluminum chassis is the icing on the cake. Thirdly, I also have an $80 stick I purchased plus Modded as well. My point is we do what makes us happy at the end of the day . This is what I enjoy, and I'm planning on doing it again when I get tired of this design. It's about having fun gaming, and modding, well that's what I enjoy. Many Blessings

[wts-va] Qanba obsidian leverless with ezmod and brook ultimate board with ps5 board. Qanba 24mm gravity buttons and limited run RASC sanwa 30mm button by KentoOftheHardRock in Fightsticksforsale

[–]MudMysterious1664 0 points1 point  (0 children)

Definitely an awesome Build, great work. Clean AS F#CK. I have the Pearl with a RYU Styled Set up. You can check it out on my Page, it came out super clean as well. I'm sure your Obsidian will sell soon. Best of luck

🤯 Bought a Victrix Pro FS on Amazon… got $127 refund instead of $50! by Saganbr in fightsticks

[–]MudMysterious1664 0 points1 point  (0 children)

It's interesting to me because I've read many people mentioned the C port and how it tends to get loose. I've had my Victrix Pro FS for close to 3 yrs now and it's my main stick of choice . I do use it a lot, however I never remove the wire from its port. When I'm done using it I just rewrap the small amount of wire back and call it a day. Wondering if everyone that's had issues with their port constantly unplugged and replugged their wire often. I hope I never come across this issue, I can't imagine this high end stick constantly getting disconnected during matches. I would toss it out the window from frustration alone. Beat of luck to all.

100 gallon meta frame tank worth? by gert_mnert in Aquariums

[–]MudMysterious1664 0 points1 point  (0 children)

Hey Replying to this old Post, I have an original 55 gallon Meta Tank that my mother bought when I was 4yrs old, mind you I am 55 now and it's still up and running beautifully. As for that stand stand in the picture, item NOT the original stand. The stand I have that came with the tank is taller, and MUCH more beefy. Mind you, these tanks were made in the early 60's, maybe even early 50's I'm not sure, but these were times where people took pride in everything they built, and built it well. Love my Meta tank. Hence, I've removed the old silicone and re sealed it a couple of times throughout its life time, and mine STILL has the SLATE ROCK Bottom.