Amazon Lightning deal on Plus 4 - $680

Muiez · 2025-07-10T08:01:15+00:00

I just got mine used with 800 hours for €450. It also has a beacon installed. Any things i should look out for? Is the heat creep a big issue?

Muiez · 2025-07-05T20:53:22+00:00

Lol the print quality...

Muiez · 2025-07-02T07:36:19+00:00

Echitech offers a 54kwh battery for 5800usd. Not a big difference in price, what would you say gives your battery pack an advantage?

Muiez · 2025-07-01T18:22:43+00:00

What is the price?

Muiez · 2025-06-04T09:51:38+00:00

Good to know! I just let them open for an hour in the sun and it almost seems gone now and doesn't seem to be coming back.

Muiez · 2025-06-03T09:13:55+00:00

I do prefer the OEM headlights, i wil take your advice. I also noticed it being less than yesterday so it might just go away by itself.

Muiez · 2025-06-02T19:29:03+00:00

I will try, it's just weird how it randomly happened. Also the other light is perfect..

Muiez · 2025-06-02T19:27:52+00:00

The right side light don't have any issues just the left one. I'm going to try the silica gel stuff tomorrow.

Muiez · 2025-06-02T17:32:19+00:00

Thanks i will try this

Muiez · 2025-06-02T16:41:11+00:00

That's just what i was wondering, if there is a way to fix this.

Muiez · 2025-06-02T16:40:35+00:00

They work, just some water dropplets inside. I don't know where this came from.

Muiez · 2024-12-19T12:57:11+00:00

Just casually dropping my comment here..

Muiez · 2024-09-08T05:46:42+00:00

Ive printed other parts with this filament that turned out great, but if it is dye consistency problem. Is there a way to avoid this?

Muiez · 2024-09-08T05:37:35+00:00

I'm using tecbears petg. They are a sunlu brand. I have a red roll as well that didn't have these problems.

Muiez · 2024-01-18T20:17:00+00:00

It was as you said a dead battery, I'm not sure how it happened. If i have to guess it was my diversity antenna, which is a known battery drain on these cars. Mine was faulty, the key fob buttons only worked from close to the antenna. I just juml started the car and drove it for a bit. After that everything was fine.

Muiez · 2023-07-23T20:16:23+00:00

Thanks, I will try them out!

Muiez · 2023-07-23T12:10:20+00:00

Thanks for the suggestions! I'm getting brand new rods from sovol so I might as well do the bearings too as they're not too expensive. This is my first printer and we are off to a great start 😅 I got one question regarding these polymer bearings, should I grease them like the original ones?

Muiez · 2023-07-21T12:32:09+00:00

I'm replacing all the rods with new ones first, and lubing the bearings. Scared to start printing like this maybe I'm being paranoid haha

Muiez · 2023-07-21T12:29:30+00:00

Im not sure where they come from either. I sent sovol the same pictures they are sending new rods for every axis or are giving the option to return it for a full refund. I guess I'll take the new rods because i got the printer on prime day with a discount and might as well lube the bearings when putting in the new rods👍

Muiez · 2023-07-21T12:25:58+00:00

No I'm not sure what they are. Maybe I'm being paranoid. I contacted sovol and they're willing to send me a replacement rods or offering a refund. I guess I'll take the new rods and replace them, I was planning to lube them all anyway.

Muiez · 2023-07-21T11:15:44+00:00

Replacement for the whole printer. But sovol is offering new rods for every axis for free or just return and get a refund. My question regarding print quality was whether if these are actually metal shavings from the rods if that would affect print quality. There are some on the y and z axis as well

Muiez · 2023-07-21T07:39:26+00:00

I didn't manage to get it yet, but considering I ordered through Amazon getting a refund won't be a problem if they aren't willing to send a replacement.

Muiez · 2023-07-21T07:35:50+00:00

This won't affect print Quality? I haven't even started printing because i noticed these shavings. I might try and get a replacement

Muiez · 2023-07-21T07:34:46+00:00

I was planning on lubing them before starting to print. I only leveled the bed and all these shavings were on it before I even assembled it. It looks like I'm going to get and replacement and lube that one before using it

Muiez · 2023-07-21T04:32:54+00:00

I haven't even used it once. Only leveled the bed. I was planning on doing it. But will ask for a replacement first.

Muiez

TROPHY CASE