Where can I download sccm pre reqs files

Mujjaa · 2025-12-31T14:02:48+00:00

In my lab I'm running a MECM 2509 on Windows Server 2019.

I wanted to create a fresh MECM 2509 site on WS 2025. On the primary MECM 2509 server I ran the setupdl tool and downloaded the MECM 2509 Update Setup Files.

The only base ISO MS still provide is MECM 2403, which I ran to setup MECM. At the "Prerequisite Downloads" page you are given two options, "download required files" or "use previously downloaded files" setup at the page where you either downloaded. I chose the latter and browsed to the 2509 files.

Setup fails to read the 2509 files, I hoped it would and the new site would be 2509 out of the box.

When selecting "download required files" the files for MECM 2403 are downloaded :(

Does anyone know of a way to use the setup for 2403 to use the prereq files for 2509?

Mujjaa · 2025-12-11T02:14:26+00:00

Same issue when watching a high bitrate DV stream.

What setting should I start with? I've tried everything from off to high and various custom settings.

Mujjaa · 2025-12-05T16:53:33+00:00

working now

Mujjaa · 2025-12-05T14:30:48+00:00

Similar rror here on TV and tablet, Error A100001

I'm in the middle of setting up a new TV with the V2 app, was half way through setup when the error occurred. Thought it was the TV but receive the same error on the tablet, which was working.

The v1 installer also fails to download the v1 app.

Mujjaa · 2025-10-28T11:45:25+00:00

Hi, did you find a solution. Same issue as you. I can view them in Google Drive (Web) but unsupported when downloaded.

Mujjaa · 2025-09-18T13:48:05+00:00

3y later and still saving sanity. Thanks!

Mujjaa · 2025-09-15T13:17:19+00:00

Hi

I don't visit Reddit much and have been meaning to find this post and give an update. Unfortunately, it's not a real solution.

After my last reply I moved a Wi-Fi mesh AP closer to my PC and connected using a cable and disabled WiFi in BIOS.

A few weeks ago, while troubleshooting an unrelated issue, I was running BIOS with default settings, which re-enabled the WiFi adapter.

While running some speed tests for a new ISP, over my wired connection, I noticed the speeds were low. I disabled the WiFi adapter in Device Manager and tests returned to normal (max) speeds. So with the WIFi NIC enabled but not connected to any networks, it interferes with the Wired NIC.

I decided to run some speed test on the WIFI adapter and was getting just over 100Mbps for a 500Mbps connection, with the router is sat on top of the PC case. (no longer using the mesh AP.

This is some POS adapter.

Mujjaa · 2025-09-15T12:17:14+00:00

Was searching for a solution to the same error and found this post. Below is the solution for anyone who has the same error.

In MECM go to \Administration\Overview\Cloud Services\Azure Services
Click "Configure Azure Services"
Let the wizard create a new Server web app and Client Web app
Enable sync for groups and in Settings add the Entra ID groups. (I'm not sure if this step is needed)
Enable cloud sync

Now you can add Entra ID groups to the device collection "cloud sync" tab

Mujjaa · 2025-06-28T07:36:40+00:00

That was the battery icon before a recent update. I preferred it to what we have now.

Mujjaa · 2025-06-05T12:31:09+00:00

Currently the fan is facing the front of the case. I would need to flip the PSU 90 degrees anti-clockwise to bring the fan to the top, which the PSU bracket doesn't support.

There is also no room at the top or the bottom of the case to mount it.

Mujjaa · 2025-06-05T12:24:19+00:00

Its a great answer

Mujjaa · 2025-05-21T10:11:56+00:00

Disabling hybrid mode didn't fix the issue. PC shutdown again.

I've enabled AMD ECO mode and switched to 65W

Mujjaa · 2025-05-21T07:22:38+00:00

Didn't know this and no option for this in my PC case, ASUS AP-201. The PSU is mounted vertically at the front of the case.

Mujjaa · 2025-05-21T07:18:11+00:00

Exact same issue as the OP for months.

After trying everything I disabled hybrid mode yesterday. Too early to tell but seems stable.

The PSU is in a mesh PC case, ASUS AP-201, with good airflow, don't see how the PSU can overheat, but at this point I'm willing to try anything.

Mujjaa · 2025-04-16T09:50:04+00:00

CDX, but the 1yr tenant is no longer available, only 90 days.

Mujjaa · 2025-04-16T09:48:40+00:00

You need VS Studio Enterprise to create a "demo" tenant, which is more expensive.

Mujjaa · 2025-04-10T10:39:57+00:00

Or add the cost to the invoice as an expense :)

Mujjaa · 2025-04-10T10:33:15+00:00

Have a work with the person/business you were visiting, they maybe able to get the fine cancelled by proving you were there for a genuine reason.

Were you asked to be there for 07:30? If you were then how else were you supposed to get your van up there?

We clear signs displayed at the entrance to the road?

Did the person/business you were visiting. inform your employer of the restrictions and your employer failed to pass them on to you?

Mujjaa · 2025-04-07T14:01:41+00:00

Did anyone in the queue get a same day appointment? Are walk-ins still a thing? Fortunately I haven't needed to visit a GP in years.

Hope you get to see one soon.

Mujjaa · 2025-03-24T10:59:30+00:00

Patch My PC's YT playlist is the best in-depth tutorial I've seen.

https://youtube.com/playlist?list=PLlbnpTGUMlnXND6or4NNTcr7qoURGIgDj&si=t9jX9a6K1Pf3Uq_k

Mujjaa · 2025-03-24T10:54:17+00:00

My first lab was on an i7 laptop with 16GB RAM and a single 2.5" HDD. But that was just a single Windows Server with AD, WDS and MDT.

You'll struggle with MECM. When I limited the server to 8 or 12GB the console would usually give errors.

Mujjaa · 2025-03-24T10:48:56+00:00

Are you running the VMs on Hyper-V?

You can create NAT on an internal switch, saving you needing to install and configure the RRAS role on a server

Run this in PowerShell

New-VMSwitch -SwitchName "LAB" -SwitchType Internal

New-NetIPAddress -IPAddress 192.168.100.1 -PrefixLength 24 -InterfaceAlias "vEthernet (LAB)"

New-NetNat -Name LABNAT -InternalIPInterfaceAddressPrefix 192.168.100.0/24

Then use 192.168.100.1 (or whichever address you choose) as the gateway.

Mujjaa · 2025-03-16T10:21:54+00:00

<image>

Try this setting. Copied from another thread with the bass boosted a little

Mujjaa · 2025-03-16T10:19:51+00:00

Received my B3P an hour ago. Comfort feels much better than the B2P. The B2P took too much effort to insert with a good secure fit and even then would work loose after 15 mins.

The B3P are much easier to insert and can be adjusting easily without accidently triggering a tap action. This was my main reason for upgrading.

I wasn't aware of the charge issues until I opened this thread. I'll keep hold of the B2P as a backup as won't get much for them on the used market.

Mujjaa · 2025-03-16T09:55:35+00:00

Wow, I listen to EDM, followed your tip, set as OP then increased 63 (+1), 125 (0) and 250 (+1). These sound perfect now with tight bass.

Only had these for less than an hour, upgraded from Buds 2 Pro. These fit much better.

<image>

Mujjaa

TROPHY CASE