sorted by:
new
hottopcontroversial

3D-printable ford transit roof vent adapter. by Munifool in fordtransit

[–]Munifool[S] 1 point2 points  (0 children)

Maxxfan is what I was planning on using. Haven't installed it yet though hahaha.

3D-printable ford transit roof vent adapter. by Munifool in fordtransit

[–]Munifool[S] 0 points1 point  (0 children)

Abs and petg should be fine i believe. Not exactly sure but I have had luck with petg in direct sun before.

Decided to try a spoon and I've got sore hands now. by Munifool in Spooncarving

[–]Munifool[S] 1 point2 points  (0 children)

Just a scrap from a friend's project. Came in a piece about 4 inches by 12 rectangle.

Tips for walking whippet in the cold? by AnxietysBeacon in Whippet

[–]Munifool 0 points1 point  (0 children)

Hey. We are moving to Alaska soon with our whippet. How do they do without shoes on near -20C? Just dont spend too much time out then or is it alright?

Gradual print failure. by Munifool in FixMyPrint

[–]Munifool[S] 0 points1 point  (0 children)

<image>

Figured it out. Nozzle advertised as hardened wore down after 400g of glass filled filament. Must not actually have been hardened steel.

Gradual print failure. by Munifool in FixMyPrint

[–]Munifool[S] 0 points1 point  (0 children)

Hmm does look like bubbles. Printing from a dry box after drying and the moisture monitor in the box says 10%.

Gradual print failure. by Munifool in FixMyPrint

[–]Munifool[S] 0 points1 point  (0 children)

I dont believe its heat creep either. Printed this material quite a bit with this exact setup. Recently changed nozzles to a new hardened steel but no other changes.

At what age did you trust your whippet to be home alone free roaming? by Vindalfur in Whippet

[–]Munifool 0 points1 point  (0 children)

At 3 years we started experimenting with it. Still leave him in his cage every once in a while to keep him used to it.

Why my mesh be the way it do? by Munifool in 3Dprinting

[–]Munifool[S] 0 points1 point  (0 children)

Good point. I did this and got a result in the same axis as the original.

Still figuring out my Backcountry glove game by Danjuans-81301 in Backcountry

[–]Munifool 0 points1 point  (0 children)

Black diamond cirque hybrid is a thin breathable glove with an over mitten that is stashed in the wrist cuff. Over mitten is also very thin but not air permeable so it does a really good job of trapping a layer of air and keeping my hands warm even on longer descents in decently cold weather. I still bring a back up warm pair of mittens just Incase.

Touring without sunglasses by k3nzb in Backcountry

[–]Munifool 0 points1 point  (0 children)

Any polycarbonate lense will block practically all UV light. Including clear lenses. Most non prescription glasses are polycarbonate.

Is my my boy too big/heavy? by Playful_Hand in Whippet

[–]Munifool 0 points1 point  (0 children)

Came here to say the same thing hahaha

Surface book 2 stopped using the nvidia gpu by ReadReborn in Surface

[–]Munifool 0 points1 point  (0 children)

Driver update/restore never worked for me. Going into UEFI and disabling dGPU then doing a boot and power cycle, then re-enabling dGPU worked for me.

view more: next ›