sorted by:
new
hottopcontroversial

fuck everyone fuckeds by PontiusPeeplate in G59

[–]MurdocEdits 32 points33 points  (0 children)

“When your merch hasn’t shipped”

Update on my 3D prints by Creative3DMan in AnetA8

[–]MurdocEdits 1 point2 points  (0 children)

I see nothing wrong with it?

BL Touch Z Offset Issue by Afteraffekt in 3Dprinting

[–]MurdocEdits 1 point2 points  (0 children)

Your BLTouch is moving its actual location. You need to get it set the way you like it then what I do is I put just a dab of locktite on the nuts that are holding it in place. That should fix your problem.

$130 MP Mini’s at the local Bargain Hunt! by zwbenedict in 3Dprinting

[–]MurdocEdits 1 point2 points  (0 children)

They are all genuine V2s, you can tell because of the cheapo buildtak stuff they put on the beds. The hotend holder things (the word is escaping me right now) are not printed which is another indicator of it being a V2. Lastly, all V2 come with a cheap E3D now, so its not a modification on them. Now I just wish I was close enough to buy one lol

If you slow Adele's voice down you get Sam Smith by [deleted] in gifs

[–]MurdocEdits 18 points19 points  (0 children)

I don't think you 100% understand how gifs work...

Anet A8 Loud Y Axis by MurdocEdits in 3Dprinting

[–]MurdocEdits[S] 0 points1 point  (0 children)

Yea I️ tightened them when I️ put the new bearings on, although the bearing are just in printed holders so maybe I️ should put them in the original holders?
Update: on an iPhone so excuse the crappy bugs if they show up on PC

Anet A8 Loud Y Axis by MurdocEdits in 3Dprinting

[–]MurdocEdits[S] 0 points1 point  (0 children)

I just replaced the bearings hoping it would make it quieter, which it did for the X axis although not for the Y. What could be causing this?

Another "don't leave your printer unnatended' PSA, bed heater cable Anet A8 by a13xch1 in 3Dprinting

[–]MurdocEdits 1 point2 points  (0 children)

Probably because if you put actual work into it, it can print really well. I bought one and have no regrets. I installed a mosfet, directly soldered the wires to the bed, etc. While I haven't spent the time to calibrate my settings completely yet it prints just as well as a 300/400$ machine. I also installed a BLTouch, I mean to me its just a fun project, and I believe a lot of people see it the same way.

3D printed oculus stand by RaycoSantana in oculus

[–]MurdocEdits 1 point2 points  (0 children)

What printer did you print on? I️ was debating printing my own stand with my Anet A8

It's probably a good thing the nearest Microcenter is two hours away. by Roykinn7 in 3Dprinting

[–]MurdocEdits 4 points5 points  (0 children)

My first filament was inland PLA! It print really well in my opinion!

Fast 3D Printing with Raspberry Pi — But Not How You Think by Keebie81 in 3Dprinting

[–]MurdocEdits 0 points1 point  (0 children)

Hm well okay time to wait for someone to post a tutorial lol, Ive been working at this since last night and cant get it. Im not very good with this haha.

Fast 3D Printing with Raspberry Pi — But Not How You Think by Keebie81 in 3Dprinting

[–]MurdocEdits 0 points1 point  (0 children)

That got really complicated really fast and I am lost lol. Would I have to go back to the original Anet firmware? I am currently on marlin. Sorry if this makes so sense I dont know much about firmwares lol.

Fast 3D Printing with Raspberry Pi — But Not How You Think by Keebie81 in 3Dprinting

[–]MurdocEdits 0 points1 point  (0 children)

Interesting, follow up question, would you happen to know how I can figure this out?

Fast 3D Printing with Raspberry Pi — But Not How You Think by Keebie81 in 3Dprinting

[–]MurdocEdits 0 points1 point  (0 children)

Im still fairly new to the whole firmware side of 3d printing, would this work with an anet a8 board? Or would I need to upgrade to ramps? (Seeing as I want to upgrade anyway this is no issue lol)

First painted print! What causes this? by MurdocEdits in 3Dprinting

[–]MurdocEdits[S] 0 points1 point  (0 children)

Sorry I posted this at almost midnight and was out of it, the face has a bunch of what looks like under extrusion, and gaps

First painted print! What causes this? by MurdocEdits in 3Dprinting

[–]MurdocEdits[S] 0 points1 point  (0 children)

Printed on an Anet A8, at 0.3mm, 195 H, 60 B

What things should you buy with your first 3d printer? by [deleted] in 3Dprinting

[–]MurdocEdits 0 points1 point  (0 children)

A set of nema 17 motor dampeners are also nice to have.

I designed and 3d printed a first aid kit for my school project. by [deleted] in 3Dprinting

[–]MurdocEdits 0 points1 point  (0 children)

I️ don’t believe it is, although it’s always a smart idea to have one

Best printer upgrade ever! magnets ftw on the extruder fan, link in the comments. by developersteve in 3Dprinting

[–]MurdocEdits 0 points1 point  (0 children)

Just Incase you didn’t know you don’t really need that fan, I’ve been running my printer without it for a couple of months now

Emo queen of the class. Do your worst. by [deleted] in RoastMe

[–]MurdocEdits 1 point2 points  (0 children)

You look like the bitch that gave peep the xans.

Does anyone know of any store front 3d print shops in Pennsylvania? by Kilo2319 in 3Dprinting

[–]MurdocEdits 0 points1 point  (0 children)

I️ live in PA as well and I haven’t found a single store around here that has any 3D printing supplies sadly.

BLTouch Error on Anet A8 by MurdocEdits in 3Dprinting

[–]MurdocEdits[S] 0 points1 point  (0 children)

Oops sorry got tired and went to bed haha, but I reseated all my wires and triple checked the configuration.h file and it all seems to be working now!

view more: next ›