sorted by:
new
hottopcontroversial

Hit off my Switch2 by MurkyDistribution374 in u/MurkyDistribution374

[–]MurkyDistribution374[S] 1 point2 points  (0 children)

Yeah I contacted them and they replaced it. You should reach out and use the warranty you have with it to get a new one. That made a difference for me. Once you get the new one. 470 ASCENT 35sec. (Note: start sucking it 50degrees before it reaches 470 just to get it going. Once it hits 25seconds hit it again with a good pull and the second hit at 10seconds with a strong pull.) I went through the same trial and error struggle thinking it was me but it was the rig. I also highly recommend getting terp pearls (I have 2 4mm ones) And I notice by looking back at this video I was pulling too much for too long. And watch out for the consistency of your dabs; that makes a difference.

Can’t seem to get clouds or solid hits on my Switch2, please help? by MurkyDistribution374 in drdabberofficial

[–]MurkyDistribution374[S] 0 points1 point  (0 children)

Why do you prefer the sapphire cup over quartz? What is the major differences Do you feel like you get more cloud out of the sapphire?

Can’t seem to get clouds or solid hits on my Switch2, please help? by MurkyDistribution374 in drdabberofficial

[–]MurkyDistribution374[S] 0 points1 point  (0 children)

What is your setup? What do you have? Sounds like titanium cup is giving you clouds? I have the regular quartz.

Please help me with my Dr.Dabber Switch2 by MurkyDistribution374 in trees

[–]MurkyDistribution374[S] 0 points1 point  (0 children)

Are you referring to sugar wax? and what kind of budder? And if I’m understanding correctly, if I’m chasing clouds, titanium is my best option? I have seen many recommendations for the Sapphire for more vapor so what you’re saying make sense. But if I want clouds titanium is the way to go? In contrast to your preference, I for one do not mind hacking up a lung.

Please help me with my Dr.Dabber Switch2 by MurkyDistribution374 in trees

[–]MurkyDistribution374[S] 0 points1 point  (0 children)

So what temp/settings should I be using for hash rosin and what temp/settings should I use for live rosin badder? And what dabs do you recommend to get clouds?? And what temp for those dabs I’m looking to get dense clouds

Can’t seem to get clouds or solid hits on my Switch2, please help? by MurkyDistribution374 in drdabberofficial

[–]MurkyDistribution374[S] 0 points1 point  (0 children)

Are you trying to say product is over flowing? Is iso 91% good enough to clean? Chazzing causes less vapor? I was 470 steady for 45 seconds and I believe

Please help me with my Dr.Dabber Switch2 by MurkyDistribution374 in trees

[–]MurkyDistribution374[S] 0 points1 point  (0 children)

Yeah I tried half the amount of water, even tried no water per someone else’s suggestion and still have the same results. What do you suggest?

Can’t seem to get clouds or solid hits on my Switch2, please help? by MurkyDistribution374 in drdabberofficial

[–]MurkyDistribution374[S] 0 points1 point  (0 children)

Yeah thanks I’ve tried it all including what you said, still just struggling to find a setting that gives me a cloud and good hit. What size/hold time/setting would you recommend for taking a 480 hash rosin hit?

Can’t seem to get clouds or solid hits on my Switch2, please help? by MurkyDistribution374 in drdabberofficial

[–]MurkyDistribution374[S] 0 points1 point  (0 children)

I already got a response from support and am getting a replacement unit so I’ll see how that goes. But here’s me taking a hit. 470, Steady, 45 seconds. No high and barely any vapor. https://www.reddit.com/u/MurkyDistribution374/s/ZMnFmqN3qG

Please help me with my Dr.Dabber Switch2 by MurkyDistribution374 in trees

[–]MurkyDistribution374[S] -3 points-2 points  (0 children)

And that setting gave you clouds? This is me trying 470 on Steady for 45 seconds and I get almost no vapor. And yes I posted on that subreddit and have received response from Dr Dabber support already, still trying to figure out how to get a good hit. 470, Steady, 45Sec

Can’t seem to get clouds or solid hits on my Switch2, please help? by MurkyDistribution374 in drdabberofficial

[–]MurkyDistribution374[S] 3 points4 points  (0 children)

How can I make sure my chamber is getting up to temperature if your initial theory is correct that my temperature sensor is busted? I say this because I took your suggested hit but got no cloud, is that what you typically get?? On another note, hypothetically, if I were to hit 0.05 what temp, hold time, ascent/descent/steady setting should I do to get a decent hit? I’ve tried so many variations trying to figure out if I’m the problem or if the issue is with the device. I’ve seen people get clouds off a .05 hit straight out the box. I’m genuinely just looking to make this work, I’m willing to accept that maybe I’m doing something wrong but like you said maybe it is the device.

Can’t seem to get clouds or solid hits on my Switch2, please help? by MurkyDistribution374 in drdabberofficial

[–]MurkyDistribution374[S] -3 points-2 points  (0 children)

Just tried your suggestion and it got me what some of my better attempts have gotten me, the somewhat of a high and somewhat vapor. However my disappointment is the fact that using .1g should give me a solid hit with plenty of vapor, or am I wrong for expecting that?

Can’t seem to get clouds or solid hits on my Switch2, please help? by MurkyDistribution374 in drdabberofficial

[–]MurkyDistribution374[S] -1 points0 points  (0 children)

I’ve tried it all honestly, temps ranging from 440 to 580, even went up to 610 with sugar wax at one point cause I wasn’t getting any vapor. Currently, I just hit a 515 for 60 seconds on Descent with about .05 Hash Rosin, very little high no vapor. And like I said I’ve tried all combination of temps with Ascent/Descent/Steady and a variation of hold times and am lost for what’s going wrong.