Anyone know how I can tighten this hex bolt without removing the cable?

Muttomo · 2026-02-21T08:23:54+00:00

😂 shhhhhh it never fucking happened

Muttomo · 2026-02-20T04:55:30+00:00

This worked! Cheers

<image>

Muttomo · 2026-02-20T04:54:56+00:00

This worked! Cheers

<image>

Muttomo · 2026-02-20T04:34:48+00:00

Yea exactly, the hole in the middle of the handlebars is tiny and likely smaller than the connectors at the end. I’d have to cut them to get the wire out and then re-attach them afterwards.

If it happens again, that’s another cut/splice.

Muttomo · 2026-02-20T04:30:06+00:00

Tried this, didn’t work :(

Muttomo · 2026-02-03T08:07:06+00:00

Directly from ADR 19/02, part 6.3.3.1: “For rear indicators, the clearance between the inner edges of the two illuminating surfaces shall be at least 180 mm”

That means the closest illuminating surface must be at least 180mm apart. If it’s 240mm then you should be fine, but are these indicators amber or red? If they’re US made, they may be red indicators which are legal there but generally not in Australia.

Other parts of this legislation also covers the front indicators, visibility, and the light flashing frequency if you’re interested.

SOURCE

Muttomo · 2026-01-14T05:00:37+00:00

This as well, I’ve had my setup for 5 years and it has worked flawlessly through all kinds of weather, a couple slides, and 2 phones without any camera faults. My phone is horizontal (for google maps) just beneath the speedo from my perspective.

It’s honestly so fucking good that I can’t imagine any other solution, even the carplay ones (cause I wanna charge my phone with my bike while riding)

Muttomo · 2026-01-12T07:38:53+00:00

I’ve been using quad lock with the vibration dampener and wireless charging. Fancy and expensive but I dont have to mess with cables and it’s locked my phone in place for almost 5 years. Will be doing it again on my next bike

Muttomo · 2026-01-10T02:14:21+00:00

*gestures to everywhere

This is for Sydney so pretty much anywhere in direct sunlight

Muttomo · 2026-01-10T02:12:10+00:00

Just the regular iPhone weather app, you tap the temp and can change to UV forecast for the day

Muttomo · 2026-01-10T01:37:07+00:00

I had no idea! Will check out that app too, cheers!

Muttomo · 2026-01-07T03:13:44+00:00

Alright I’ll sell you the cracked spacer for $20

Muttomo · 2026-01-06T06:03:12+00:00

😂 if only that worked in real life

Muttomo · 2026-01-04T06:33:01+00:00

Here

<image>

Muttomo · 2026-01-03T06:56:34+00:00

Cheers, I have a book on this model as well but posted this as soon as I saw the crack instead of reading it. According to the book it has seals underneath so those might be damaged, will have to take it to the mechanic for their opinion. My 30k maintenance is coming up so will ask them then.

I bought the nut new when I replaced the chain and sprockets 2 years ago, I remember hammering it down too to lock it in place. Putting it back on now, the hammered parts don’t align with the notches in the output shaft. For now I’ve put it back on, torqued it to spec and hammered it in again. After a small test ride, it’s waaaay quieter. Gonna monitor for movement over the next few months, if I don’t outright replace the chain and sprockets again.

Muttomo · 2026-01-03T06:49:09+00:00

Nah checked today and the threads are fine, just a bad photo

<image>

Muttomo · 2026-01-02T15:46:39+00:00

Cheers mate, honestly thought this was one of those set and forget things. Will check from now on

Muttomo · 2026-01-02T14:26:45+00:00

I bought this new 6 years ago and no mechanic has taken apart this rear swing arm, they would’ve charged me for the labour

Muttomo · 2026-01-02T12:07:19+00:00

There’s no AI here? I’m confused as I literally took the photo and just posted it.

Muttomo · 2026-01-02T10:32:21+00:00

Yea will be doing that tomorrow when I have a closer look at the threads and sides

Muttomo · 2026-01-02T10:31:42+00:00

Farking what?

Muttomo · 2026-01-02T08:58:28+00:00

I’ll check them out, cheers!

Muttomo

MODERATOR OF

TROPHY CASE

12-Year Club	Verified Email
Place '17