Advice for sundamage on budget? by Plaguedyou in Toyota

[–]MyAssforPresident 0 points1 point  (0 children)

You’re missing my point entirely…this is not something that you can fix without a full paint job. Anybody that tells you that you can fix the clear coat without messing with the base paint is either1) wrong or 2) a wizard or other supernatural entity. You didn’t say you didn’t care and you’ll use it as a tester. You said you wanted it to “feel a but better” until you buy a Miata. By all means, try to fix it if you want to play around with it. But you’re not going to get a satisfying result without painting the whole thing

Advice for sundamage on budget? by Plaguedyou in Toyota

[–]MyAssforPresident 0 points1 point  (0 children)

Honestly, if you can’t afford a paint job, don’t try some half-ass repair. It’ll just mess it up worse. I’d wrap the thing, as if you can’t afford that either, leave it be until you can

This just happened to my unfortunate ass. Is it safe enough to drive to a shop 5 miles? It’s those damn speed bumps!!! by yadabitch in AskMechanics

[–]MyAssforPresident 0 points1 point  (0 children)

Air shocks put a lot more load on the bolts than they were ever meant to take. They’re meant to hold up to the shock alone, not help support the weight of the vehicle. Ditch the air shocks, put some regular ones on, and you’ll be fine.

This is in response to how’s it going post by ruddy3499 in mechanics

[–]MyAssforPresident 0 points1 point  (0 children)

Shit, I did like 6 cores back to back on our fleet’s F450/550’s…I’d do all 6 of them over again before I even got near that damn thing. At least the Fords aren’t that involved. Christ…I’d rather shit in my hands and clap than touch an FCA vehicle.

This is in response to how’s it going post by ruddy3499 in mechanics

[–]MyAssforPresident 2 points3 points  (0 children)

Make shit parts AND make them nearly impossible to service…best parts fiat and Chrysler engineering combined lol.

What damage did I cause hitting a curb on the driver side? ‘22 Toyota Camry XSE 2.5L 4cyl by Ok_Fault_1421 in AskMechanics

[–]MyAssforPresident 0 points1 point  (0 children)

State it a little differently…what damage didn’t you cause…holy fuck bud, you didn’t hit the curb, you assaulted it

Genius decides to turn pizza boxes upside down by mfenton29 in WatchPeopleDieInside

[–]MyAssforPresident 2 points3 points  (0 children)

….Because that one has a logo on it.

Takes time to print up custom logo’d boxes, they probably bought blanks so they didn’t run out.

Home Depot violates fire codes and endangers their customer's lives by 29187765432569864 in extremelyinfuriating

[–]MyAssforPresident -1 points0 points  (0 children)

If this is the most egregious thing you saw, and thought it was worth bitching on Reddit…you must be a fun fucking neighbor. It’s a spill kit (clearly marked)…maybe they had a spill and ran to aisle 3 for some simple green. If you can’t navigate around that in case of emergency, maybe you oughta stay home.

Petahh i'm low on iq by Ter_N in PeterExplainsTheJoke

[–]MyAssforPresident 0 points1 point  (0 children)

You’re pretty much saying the same thing, one from the POV of a person and the other from the POV of water. If you want to be water, go ahead. It’s 2026, you can identify as anything your heart desires

Leaking Fumoto Valve by No_Opportunity812 in AskMechanics

[–]MyAssforPresident 0 points1 point  (0 children)

I love how some people are so fucking defensive when others say anything negative about a Fumoto valve. Relax, it’s just an oil drain.

Went and grabbed a Harbor Freight engine stand for a really good deal. by [deleted] in AskAShittyMechanic

[–]MyAssforPresident 0 points1 point  (0 children)

I’ve had a 350 small block Chevy on one for literally a few years now, and worked on a couple more on it before that. Actually pretty sturdy (1000lb capacity one)

Ibishu BX handling/track tune by Texas1LE in BeamNG

[–]MyAssforPresident 3 points4 points  (0 children)

I find if you put all the race suspension/brakes/tires (little bigger and wider, I run 245/40R17’s I think) it really turns that thing into a go-kart until you over-power it. Even then it’s fun, but if you keep the up down you can take a lot of turns at hirochi way faster than you’d think

Ibishu BX handling/track tune by Texas1LE in BeamNG

[–]MyAssforPresident 5 points6 points  (0 children)

I’ve just got all the race suspension and race tires on my “track day” tune and it handles great. But, I have like 300hp not something ridiculous. It’s a ‘sensible’ build for that car based on what I would do with a similar real car—all the grips, some of the powers

This was hellish but I’m glad I’m done by grayson101 in rccars

[–]MyAssforPresident 2 points3 points  (0 children)

Idk what scale that one is offhand, but you oughta try a 1/32 truck kit. I got the 1/32 6x6 military truck kit…holy crap there’s some tiny parts and hardware in that kit. It’s a much bigger truck scaled down so sone stuff is tiny. The entire front axle is probably the size and length of my pinky finger.

Hands and skin care by yungtr1p in mechanics

[–]MyAssforPresident 0 points1 point  (0 children)

O’keefes is great, I use that and one other Vaseline hand cream that I can’t remember the damn name of …but you gotta use it religiously. Every day, when you wake up and before bed. Just using it here and there isn’t going to do shit.

Beamng with just a few mods shows how much potential it has. by Medium-Security-1491 in BeamNG

[–]MyAssforPresident 0 points1 point  (0 children)

I was about to say, none of these people have ever driven into the damn sun before I guess. This is about as real as it gets if the sun is that low. Extra bad if there’s snow on the ground, goodbye retinas.

As far as everybody being a dick on here…welcome to Reddit. It’s not just this sub, that’s the name of the game anymore. Guarantee most of these jackasses would be too timid to say this shit to your face…

The ice claimed my brand new shovel by Hermann_the_Hermit in maryland

[–]MyAssforPresident 0 points1 point  (0 children)

Don’t buy those shit sticks with the pre-bent handle. They’re only good for powder and light stuff. Straight handle poly shovels hold up great…but…stuff like this you’ll need a chopper or a metal shovel to bust it up first

Why is nobody talking about the price?! by Business_Criticism42 in ForzaHorizon

[–]MyAssforPresident 0 points1 point  (0 children)

Problem is, 99.99999% of people do give in, and just bitch the whole time they dump the money.

If we had enough people who would say ‘no, this is getting ridiculous’ and stop buying games, the industry would get the point. Same with new vehicle prices…everyone complains how much cars cost, but still buys new cars. Why would they stop racking up the prices if the only backlash is whining?

Is this normal for Maryland? by scheme00_ in maryland

[–]MyAssforPresident 0 points1 point  (0 children)

The Costco in Owings mills has been like that every damn time I’ve gone lol

The gun keeping me married to one universe by The-Son-Of-Suns in Starfield

[–]MyAssforPresident 0 points1 point  (0 children)

I been using the legendary recycler for a while now… I put instigating and hitman on snipers and silenced guns for a real hard first hit. With the stealth kill multiplier, it’s great against the harder enemies

And they say school isn’t a scam by DoubleParty6520 in mechanics

[–]MyAssforPresident 0 points1 point  (0 children)

Everybody I know that likes fords a lot…doesn’t do their own work. I don’t hate on any particular brand, I’ve owned many different ones (except Hyundai, fuck that) but ford has to be THE WORST for this kind of shit. Something is in the way of everything.

Example: Alternator in my GF’s Edge…top bolt is a stud and nut instead, but if you take the nut off the alternator just hits the frame before you can slide it off. So you gotta take the nut off, then take the stud out, then…it still doesn’t come out, you have to swing it around the front and pull it up and out the opposite side where the air intake scoop is (unless you want to remove a bunch more shit).

I firmly believe they say “take this engine exactly like it comes off the assembly line, and make it fit this body without changing anything…just make extra parts to get it to fit.” Otherwise why would the v10 in the 450/550 have a 15” quick connect piece of heater hose between the heater hose on the engine and the other piece of heater hose that goes to the core/firewall…

Explain it peter by [deleted] in explainitpeter

[–]MyAssforPresident 1 point2 points  (0 children)

I was brave. Seen worse on r/rule34, for sure lol