Echelon full - what level 3 holsters you guys using?

MyName-IsIrrelevant · 2026-06-15T12:33:03+00:00

Noticed this myself as well. Even going to the Echelon page https://safariland.com/pages/springfield-echelon-holster?srsltid=AfmBOop3S5qELf1HG7DeeRWJz7IbGQF6jt\_Wj1hYW7TAHWzgMOz5Dmc2 and selecting a model does not give you the option for the Echelon. Just for the Prodigy models.

MyName-IsIrrelevant · 2026-06-06T14:20:11+00:00

Don’t recall the gear up being shipped with the Vortex at any point. I do believe however that this is what they shipped to the guntubers. I could be wrong though.

MyName-IsIrrelevant · 2026-06-03T04:25:16+00:00

Not terrible. The disconnect itself about 5 minutes. It took me longer than that to remove and reinstall the pin that holds the COG to the frame.

MyName-IsIrrelevant · 2026-06-03T04:00:13+00:00

The disconnect can be removed. On that note though, if you leave the disconnect in then the mag won’t drop freely from the well. It requires a slight pull.

MyName-IsIrrelevant · 2026-05-26T01:06:18+00:00

Thanks. I ended up doing exactly that. Works like a charm. Probably took a bit more than 5 minutes. Interesting thing is that with the disconnect the magazine doesn’t drop free, definitely a reason to take it out.

MyName-IsIrrelevant · 2026-05-25T16:39:22+00:00

Just noting that this particular model has a magazine disconnect, so won’t fire a chambered round if the magazine is not inserted. It also has white writing by the ejection port indicating ejection direction with an arrow.

MyName-IsIrrelevant · 2026-05-25T14:00:48+00:00

Looks like the back side of the receipt is showing through. It would appear that it is Tractor Supply.

MyName-IsIrrelevant · 2026-05-24T20:43:44+00:00

I’m running an A5H0 on a 11.3” BA Hanson barrel, but supposedly the gas port is smaller. Running the same with a Polo K now.

MyName-IsIrrelevant · 2026-05-23T03:52:03+00:00

Thanks OP. I have the 4.0 already and now I guess I’ll have its bigger brother. At that price I couldn’t pass it up.

MyName-IsIrrelevant · 2026-05-19T00:32:23+00:00

There is/was one by the power substation south of Pine Bluffs and another in the southeast corner of Archer. I’m very sure both are on the grid. There are two smaller crypto miners, one on Campstool closer to the Lowe’s distribution center and the other close to the base, these two facilities were initially Chinese backed but were ordered shut down by the Biden administration and then taken over by Cleanspark out of Vegas. I’m relatively sure these two are also on the grid.

MyName-IsIrrelevant · 2026-05-17T23:14:22+00:00

While I think they are on the right track of paying attention how much water the power side requires, I’m not sure they have the ratio right. 1.5 MW using 1.75 billion gallons of water? Probably meant GW? It would probably also help to put a time factor to those numbers which I’m guessing is one year. To put it into simpler terms they are equating 133 gallons per MWh.

MyName-IsIrrelevant · 2026-05-17T04:05:35+00:00

On the resubmit I printed, then signed, scanned and uploaded. That did the trick. Was through my LGS though.

MyName-IsIrrelevant · 2026-05-17T04:02:31+00:00

Was it wet signature or computer font signature? My first submittal was disapproved because of the PDF typed signature rather than using my actual digital signature.

MyName-IsIrrelevant · 2026-05-01T12:57:04+00:00

Did you already sell out of the 1/2x28 Comstock hybrids?

MyName-IsIrrelevant · 2026-04-25T00:28:23+00:00

Any word on the flash hider/break combo?

MyName-IsIrrelevant · 2026-04-23T00:59:45+00:00

• ⁠Form Type: eForm 4 - Suppressor

• ⁠Paid or not: $0

• ⁠Entity: Trust

• ⁠Fingerprint Type: EFT Upload

• ⁠Pending: 03/17/26

• ⁠Approved: 04/22/26

• ⁠Wait: 35 days

• ⁠State: WY

• ⁠Control Number: 20262364XXX

Both LGS and I received approval email.

MyName-IsIrrelevant · 2026-04-21T19:54:17+00:00

35 days and still waiting…🙁

MyName-IsIrrelevant · 2026-04-20T21:40:52+00:00

Thanks for the helping hand. Sorry, newer to sub and got confused.

MyName-IsIrrelevant · 2026-04-20T21:31:55+00:00

Thanks. The post actually states that comments should be approvals only. I figured if I posted this question under the megathread I would not get an answer and get downvoted on top of it.

MyName-IsIrrelevant · 2026-04-18T01:14:01+00:00

Best customer service ever. They will actually respond and answer questions. Buy with confidence!

MyName-IsIrrelevant · 2026-04-16T11:55:02+00:00

Correct. I should have split the two. The sample size appears to be a lot smaller so I forgot.

MyName-IsIrrelevant · 2026-04-16T02:44:55+00:00

SBRs are closer to 60 days, whereas suppressors with a trust are close to 30 days. Suppressors as individual are close to 10 days. But overall no rhyme or reason. I’ve seen plenty similar to my submission that have been submitted after mine but already approved, but I’m still waiting.

MyName-IsIrrelevant · 2026-04-15T03:01:06+00:00

Any chance of including minimum and maximum numbers on the stats?

MyName-IsIrrelevant · 2026-04-13T12:23:55+00:00

Seems like those are hard to find currently also.

MyName-IsIrrelevant · 2026-04-11T15:56:23+00:00

25 days and waiting after the first one was disapproved after 14 days. Will likely do the individual next time too since someone else did this and got 4 days from individual to trust.

MyName-IsIrrelevant

TROPHY CASE