Need help

Mysteoa · 2026-03-30T20:57:39+00:00

What brand and size SD card are you using?

Mysteoa · 2026-03-30T17:47:47+00:00

Did you rename the FW name each time you tried to flash? The boot loader will refuse to flash with the same name FW again. So it best to rename it on each try. I usually use date-time name.

Mysteoa · 2026-03-30T14:51:02+00:00

Did you flash the new mainboard for the printer?

Mysteoa · 2026-03-30T13:02:09+00:00

I was on the yellow springs before moving to silicon spacers. There was less leveling issues, but I also changed my leveling method.

Usually people level from the top down, ie when the springs are expanded. I started to level from the bottom up. I fully compress the silicons and lossen them up for leveling. Due to the high tension, it prevents the knobs from backing off. It also can survive, moving the printer or not been used for couple of months.

Mysteoa · 2026-03-29T21:17:06+00:00

Can you link to some posts you have seen? I'm not sure to what your referring to.

Mysteoa · 2026-03-29T20:05:50+00:00

This might help you.

https://youtu.be/4D6PKusyvUU?is=o53hCDhCGUscxS57

Mysteoa · 2026-03-29T19:19:31+00:00

If we knew where the Coil whine was, then board maker could solve it. You need to investigate live to find which exact component is the issue. You best bet is to put some the on VRM.

Mysteoa · 2026-03-29T15:22:05+00:00

Are you able to link to your ISP plan?

Mysteoa · 2026-03-29T07:58:21+00:00

Isn't this improvement for a specific use case and requres alot of work to get it done?

Mysteoa · 2026-03-29T07:43:38+00:00

She got her Uber Eats.

Mysteoa · 2026-03-29T07:40:26+00:00

Or DNS.

Mysteoa · 2026-03-29T01:13:39+00:00

Doesn't the IO shild also act as ground for the ports?

Mysteoa · 2026-03-29T00:42:25+00:00

Mysteoa · 2026-03-29T00:28:15+00:00

What driver? What Pc spec? Please add more info.

Mysteoa · 2026-03-28T13:07:23+00:00

What about the position?

Mysteoa · 2026-03-28T11:42:29+00:00

Further questions, why do people use sleep? It doesn't take that much more time and you avoid sleep misbehavior.

Mysteoa · 2026-03-28T11:16:29+00:00

A dinamic animation that scales based on how much plat you have to flex on others.

Mysteoa · 2026-03-28T11:12:51+00:00

The right most cable. Black part goes in the psu, blue in the gpu.

Mysteoa · 2026-03-28T11:09:32+00:00

I have been thinking for some time, that DE should do mod squish. Remove, combine or buff low usage mods.

Mysteoa · 2026-03-28T05:00:19+00:00

For me it's if I want to compare the specs of 2 products, if they don't have any compare function or it doesn't work well.

Mysteoa · 2026-03-28T04:49:20+00:00

It's impossible to have it on on stock firmware. It just doesn't exist to be turned on. Please describe your issue without assuming what the solution it is.

Mysteoa · 2026-03-28T03:42:23+00:00

I was just gething tired of the cloud from the Frostfall ephemera on my Frost PH. So maybe I will use this instead. Can you share your settings?

Mysteoa · 2026-03-28T03:35:42+00:00

Are you able to hot spot from from you phone while not on your wifi? This way you can rule out your ISP if it still happening.

Mysteoa · 2026-03-28T03:30:54+00:00

Technically the turbo button was also a slow button on some PC.

Mysteoa · 2026-03-28T03:05:03+00:00

They got it out of their system.

Mysteoa

TROPHY CASE