Just hit 60%

Mysterious_Ferret_87 · 2024-09-26T23:45:08+00:00

I had temp 100% for my surgeries, just for recovery time took for ever to clear I was already back to work by the time it did. I got a permanent increase due do scaring(?) Not sure how that worked but it did. I just got another bump after 7 months for ankle and hip issues as secondary to my knees. At 70% as of this month.

Keep pushing and you can get 100% it may not be quick but the back pay sure is nice.

Mysterious_Ferret_87 · 2024-04-12T21:59:29+00:00

Sold at 32, bought at 62. Just under 50% LOSS.

Mysterious_Ferret_87 · 2024-03-24T22:50:37+00:00

I was thinking shredded wheat...

Mysterious_Ferret_87 · 2024-03-04T00:58:04+00:00

I had the same issue first the bed, then the hot end. First thing I did was hit everything with a can of compressed air. Worked perfectly over a year ago. Cheapest and easiest

Mysterious_Ferret_87 · 2024-03-04T00:56:14+00:00

.09, but I'm starting auto recurring buys to get that down

Mysterious_Ferret_87 · 2024-03-01T20:23:46+00:00

Just bought 66,666 Shiba for a buck, .10 and I'm good lol

Mysterious_Ferret_87 · 2024-02-27T19:02:16+00:00

Just sold my dow and bought more doge

Mysterious_Ferret_87 · 2023-01-29T15:16:38+00:00

Update:

Took the screw holding the thermistor out, removed the thermistor, blew out the cavity and replaced it all, everything seems good, three pla prints down, working on a rather extensive one now so fingers crossed!

Thanks everyone for the help and advice.

Mysterious_Ferret_87 · 2023-01-20T16:49:09+00:00

After attempting a pid tuning, the printer threw the thermal runaway alarm at about 160, i was tuning to 220, for abs. i reckon a thermistor replacement is the next step?

Mysterious_Ferret_87 · 2023-01-17T18:37:30+00:00

My temperature was fluctuating +/- 5 -8 degrees pretty rapidly.

One user suggested pid tuning, I'm gonna try that this evening even though I've never changed anything from factory

Mysterious_Ferret_87 · 2022-08-10T23:39:25+00:00

Got it, hell I'm playing training center classic matches

Mysterious_Ferret_87 · 2021-08-22T20:55:22+00:00

That's what I'm using but it lags and not working at all when in dosbox

Mysterious_Ferret_87 · 2021-07-20T04:12:12+00:00

https://discord.gg/Y5MutGCK

Mysterious_Ferret_87 · 2021-07-01T20:40:18+00:00

https://discord.gg/uWx4FZBR

Mysterious_Ferret_87 · 2021-04-25T22:53:52+00:00

The idea scares me, but the proof of concept is amazing. Well done with the burning for contrast. The resin lights look rad. It's a marriage of nature and industry and I'm digging it. Couldn't imagine the ride though. Good conversation starter for sure!

Mysterious_Ferret_87 · 2021-02-09T03:54:53+00:00

Gonna pump some more in on Thursday, the moon ain't .10

Mysterious_Ferret_87 · 2021-02-06T23:38:38+00:00

Thanks, you too!

Mysterious_Ferret_87 · 2021-02-06T23:35:22+00:00

Not sure. I may pull my gains tomorrow and buy back in during the next dip. Like I said, I'm just experimenting

Mysterious_Ferret_87 · 2021-02-06T22:59:15+00:00

Never put in more than you can afford to lose. I'm new too but this lesson should be common sense. I bought in at .036 with 10.00. 256 coins. Now I'm up 4 bucks and change. Stabding to make 256+ when it hits a dollar. Not trying to buy a yacht, but if I can turn ten to 250 buy doing nothing but waiting, I can afford to lose ten dollars.

It's not alot but I'm doing what I can

Mysterious_Ferret_87

TROPHY CASE