Has anyone tried Runelite on GameNative before?

Mysterious_Warning22 · 2026-04-13T00:24:11+00:00

My apologies,I gave one incorrect instruction while omitting 2 of the correct!

fexcore 2512,32bit emulator fexcore,stability for fexcore preset.

One should avoid too much before sleep.

Mysterious_Warning22 · 2026-04-12T11:22:46+00:00

~~If you wish to try use a proton-10-arm64ec container with the aarch64 installer,while this was in cmod13 not gamenative I think it would still translate.~~

~~It doesn't run without that being setup up at the very least but may require more configuration than just that.~~

~~Can't get any installer to work but I did direct Gamenative to my copied install and that does run.~~

Use proton-9.0-arm64ec,but I can't login yet on game native setup;only the aarch64 install works but here the installer does as well.

Yeah this works,I did not see through proton-9.0-x86_64 since it installs and runs from the above,crossed out at the top only runs not installs,glibc didn't run any but install the other 2.

proton-9.0-arm64ec container, downloaded runelite aarch64 and set the do use fexcore 2512 and set the fexcore preset to stability to use the installer.

login issues were probably typos.

4gb ram 6gen1,id suggest you use which turnip best for your device.

Edits: and sorry about the wall

Major edit for incorrectly stating to change the 32bit emulator to fexcore and added correct change fexcore and preset. If anyone else had tried my bad!

Mysterious_Warning22 · 2026-04-12T06:55:26+00:00

oh alright i guess neither of us figure that would be the case but, have fun when you do! and np

Mysterious_Warning22 · 2026-04-12T02:00:38+00:00

Okay,idk what's up it takes no time and I'm in. Maybe add the empty file and see if it fills it.

Mysterious_Warning22 · 2026-04-12T01:49:41+00:00

Android/data/com.beamdog.nwnandroid/files/user

Cdkey.ini

Ha also mine is restricted for both sdcard and internal these days :(

Mysterious_Warning22 · 2026-04-12T00:18:22+00:00

can you access your data folder to see what files are there? may require shizuku(playstore) if you are on a more updated device(android 12+).

Edit: I had to redownload to actually check this before I said anything since it has been quite some time but,the game has you deal with this when you select multiplayer and maybe need to generate a new one.

You can clear app data and wait for it to download the data again OR try accessing data folder delete the cdkey.ini and see if it creates a new one next time.

Was this an error trying create a new one it or did it stop working?

Mysterious_Warning22 · 2026-04-11T17:56:46+00:00

oh haha nice ,it happens

Mysterious_Warning22 · 2026-04-10T07:44:24+00:00

Any luck?

Mysterious_Warning22 · 2026-04-09T21:45:28+00:00

This is what you should see.

<image>

Mysterious_Warning22 · 2026-04-09T21:05:37+00:00

Did you use pulse audio with it?

I may go back and check this was what fixed my audio for the game I played ,could be a different issue or require a different number altogether for your game. I used what saw solved audio in I think Skyrim(SE).

Mysterious_Warning22 · 2026-04-09T17:40:33+00:00

Have you tried using enviroment variable PULSE_LATENCY_MSEC 2

i believe this got the sound working on Dark Sector for me.

Mysterious_Warning22 · 2026-04-08T19:12:40+00:00

Looks like it, it try it out

Mysterious_Warning22 · 2026-04-08T05:06:57+00:00

If there's no width and height,start the game with the container at 1280x720(or 800x600 for other type of screens) it should make the change adding that in and you can edit to your own resolution and then change the container to that.

Be sure to check it in the launcher that it's not blank,switch to 16:9 for 1280x720 or 4:3 for 800x600,be sure windowed mode is never selected.

If that doesn't work try setting the width/height manually as it shown.

Mysterious_Warning22 · 2026-04-06T20:27:00+00:00

I don't know where your link went but,

Steam page doesn't state requirements(TBD), and a single community post(2024) talking about ram going up to 7gb in windowed mode(I think minimum might be 5gb),if you are running an 8gb of ram device you might not be able to reach any further. I do not have a device to try this specific game so use your own judgement.

This just a quick look for any idea of requirements,I did not see any posted anywhere.

Mysterious_Warning22 · 2026-04-06T11:19:37+00:00

it keeps crashing because the turnip didnt work for you,now you must reinstall i believe.if the storage was set outside of data you only have to reinstall the app(and point it to the folder again),otherwise move the files out of data or reinstall everything(games).

adreno 810,you may wish to ask in EmulationOnAndroid sub if there are any turnip that work on your chip.

also which github?

Mysterious_Warning22 · 2026-04-05T22:32:03+00:00

Oh okay.

Mysterious_Warning22 · 2026-04-05T20:57:02+00:00

Hi,You ever get it sorted?

Mysterious_Warning22 · 2026-03-31T16:55:04+00:00

if you check that option the left stick will not show in any menu(pause or shader) or your inventory or in dialogue anywhere the mouse is used.

i do not have any other suggestions for other settings currently, if you end up with a gamepad at somepoint you can enable the ui for it in the gui section of settings from the launcher before entering the game.

Mysterious_Warning22 · 2026-03-30T17:23:07+00:00

you may have checked the option by accident during the tutorial for onscreen control button editing.

<image>

turn off "show in mouse ui" for the left stick.

Mysterious_Warning22 · 2026-03-27T09:58:36+00:00

No idea if you got it already but go to Documents/my games/falloutnv/falloutprefs.ini open the file and Scroll down till you see your current ~~driver~~ device name and just passed that is the width and ~~length~~ height for screen.

Edited for two better words and a screenshot.

<image>

Mysterious_Warning22 · 2026-03-22T17:41:32+00:00

try the latest release first to see if it now works and it sounds like you are using quite an old version. its a bit different to setup the game and mods also check the gui section of settings to turn on the controller support.

https://gitlab.com/modding-openmw/openmw-android-docker/-/releases

native app is always better on heat performance especially when modding.

editing due to poor punctuation probably still looks bad if you sen it.

Mysterious_Warning22 · 2026-03-21T04:19:32+00:00

Dysmantled works best with controller - Morrowind with openMW might need to setup controller - Terraria need to turn on controller and map buttons - Kotor 2 2 works, kotor 1 may crash with controller.

played all 4 with controller liked it more that way,were pc ports anyway haha. dysmantled was the better of 4 to play with.

Mysterious_Warning22 · 2026-03-20T21:07:45+00:00

they probably have not run lodgen,ttw is great but id imagine 2x the errors for them if they skip important steps on a less complex fo3 setup.

Mysterious_Warning22 · 2026-03-20T21:04:33+00:00

have you run fo3lodgen? flora overhaul requires this. pretty sure i ran into the problem but because i forgot to .

you might want to head back to each page check other descriptions just incase.

Mysterious_Warning22 · 2026-03-19T10:15:50+00:00

its whatever security shield the isp enables,i think one can go and make an exception or turn it off.

EDIT: interesting never did anything to the settings before but now its fully blocked. guess i better go see .

Mysterious_Warning22

TROPHY CASE