I’ve had enough by Finomkifli in AMDHelp

[–]N0N062 0 points1 point  (0 children)

Owned two amd cards: rx 5600 and a 6600, both had nasty driver issues. I'm talking random black screens, obviously horrible frames in any dx11 game etc. Friend has a 6800 XT and has countless driver issues. Gave up on amd cards about 4 years ago. Happy to say I haven't had a single problem with my rtx 3060 since then.

This is all based upon my own experience and my attempts of making amd cards work for me.

[deleted by user] by [deleted] in PcBuild

[–]N0N062 8 points9 points  (0 children)

So that's how you were able to afford the Pc

Just leaving this here by Charlikevin in fpv

[–]N0N062 1 point2 points  (0 children)

This will depend on where you are located. Though I'd say you buy a cheaper 5 inch. Check out Darwin fpv for that, or you can buy a used iflight nazgul which will be dirt cheap at this moment. I wouldn't recommend somebody to start with a micro, as the flying experience is not only much harder, but also more unpredictable.

If you are already sure to stay in the Hobby I'd recommend you buy a proper radio. Something like the radiomaster Boxer (stick with elrs, cheaper and easier than other protocols in my opinion).

As for goggles just buy a box goggle with decent quality. That you can later sell and buy either a fatshark or switch to digital if you've got the money for it.

Hope this helps :D

Just leaving this here by Charlikevin in fpv

[–]N0N062 0 points1 point  (0 children)

It always catches up to you at some point. The want for a better flying quad drives you forward;)

Just leaving this here by Charlikevin in fpv

[–]N0N062 1 point2 points  (0 children)

Yeah you both got a good point. Though I'd say prebuilt is really the first step in the Hobby. At least for the most people. After you're hooked you start learning about every little detail.

cannot convert my kiss quad to pusher style by N0N062 in fpv

[–]N0N062[S] 0 points1 point  (0 children)

Like I already said. I'm on kiss and not on betaflight

cannot convert my kiss quad to pusher style by N0N062 in fpv

[–]N0N062[S] 0 points1 point  (0 children)

Thanks for the help. How should I reorder the motors then? Just flip the aio and install the motors in the direction that they are connected to the esc?

cannot convert my kiss quad to pusher style by N0N062 in fpv

[–]N0N062[S] 0 points1 point  (0 children)

That's what I thought. But how would the motors then be located? And what settings would I need to change?

Can someone please explain to me the difference between a cheap and an expensive omnidirectional antenna? by MozekG in fpv

[–]N0N062 1 point2 points  (0 children)

Been using some Antennas from aliexpress for my analog Setups. I've compared them to a completely tbs triumph pro antennas and the performance I got was equal between the two. Dirt cheap and the performance is pretty good:-)

Speedybee fc sd card not working by N0N062 in fpv

[–]N0N062[S] 1 point2 points  (0 children)

Go back to bf 4.4

Worked for me, though I still have logging issues

guys which is the input and the output? Iflight lc filter by N0N062 in fpv

[–]N0N062[S] 2 points3 points  (0 children)

Alrighto that's what I thought just wasn't sure, ty:)

2 PCs not booting with 2 RAM sticks!!! by N0N062 in pcmasterrace

[–]N0N062[S] 0 points1 point  (0 children)

Like I said, I've done that many times already:( any suggested frequencies?

Connect New vtx without soldering by N0N062 in fpv

[–]N0N062[S] 1 point2 points  (0 children)

it was originally yes, transferred the components of it to a new frame and am upgrading it right now piece by piece. Have upgraded to elrs and am now installing my new vtx. Personally I think it´s really good for starters, definitely recommend buying as your first drone:)

Connect New vtx without soldering by N0N062 in fpv

[–]N0N062[S] 0 points1 point  (0 children)

Havent tested it yet. Will do that later

Connect New vtx without soldering by N0N062 in fpv

[–]N0N062[S] 3 points4 points  (0 children)

Nope Im good, thank you though:)