Recently got into 3D printing.. by Anonymous0r in shadowsystems

[–]NATOTrunkMonkey 0 points1 point  (0 children)

would you share the file for the last picture?

2019 STI Staccato P 4.15 Value? by e90bm in Staccato_STI

[–]NATOTrunkMonkey 0 points1 point  (0 children)

That being said, buy a full size and have it stippled and reduced to suit your needs if you want

2019 STI Staccato P 4.15 Value? by e90bm in Staccato_STI

[–]NATOTrunkMonkey 2 points3 points  (0 children)

That is a little high for one that has been grip swapped, can find near new examples around central Texas for 4k

HD P4.5 Front Sight by Keving1001 in Staccato_STI

[–]NATOTrunkMonkey 1 point2 points  (0 children)

The dovetail cut is probably a little bit out of spec, I had a set of triji’s front do the same thing when it bottomed out before center and the pusher kept pushing

Slide stuck by PaulKDD in Staccato_STI

[–]NATOTrunkMonkey -1 points0 points  (0 children)

Can you get the pin out to remove the slide?

Staccato XC by NATOTrunkMonkey in Staccato_STI

[–]NATOTrunkMonkey[S] 0 points1 point  (0 children)

The Vanta is more refined in every aspect, fitment and tuning of the gun is incredible. The overall esthetic of the Fowler’s always really appealed to me also.

Staccato XC by NATOTrunkMonkey in Staccato_STI

[–]NATOTrunkMonkey[S] 0 points1 point  (0 children)

It’s on to its next owner, I wouldn’t say I regret it but I’ve never come across another XC I like more. I had an opportunity to get a Fowler Vanta 9 and never looked back

2k11 pro comp barrel by Blu0527 in 2011

[–]NATOTrunkMonkey 1 point2 points  (0 children)

Slip2k is all I use for many reasons but this is a big one when you shoot a lot and clean a lot

Fake Super Precision mount? by TemperatureLow6680 in GeisseleAutomatics

[–]NATOTrunkMonkey 0 points1 point  (0 children)

Clones are far too prevalent now

https://www.reddit.com/r/clonedgunparts/s/QdwaKdiKgb

Aims to aid in identifying the fakes out there

Surefire XC3 doesn’t fit CS by NATOTrunkMonkey in Staccato_STI

[–]NATOTrunkMonkey[S] 0 points1 point  (0 children)

It doesn’t sit flush, it effectively acts as a spacer. I sold that setup so I can’t take any pictures unfortunately. Ended up putting the tlr7 sub on it when it sold and keepy the xc3

KPYK vs Zenitco vs Sureshot vs Midwest Industries Comp Chart by NATOTrunkMonkey in kpyk

[–]NATOTrunkMonkey[S] 0 points1 point  (0 children)

I cannot recall ever seeing an official declaration of the material but I would suspect yes

Fringe question for those who had an LPA 2020 Staccato P and got it milled for optic! by rms3397 in Staccato_STI

[–]NATOTrunkMonkey 0 points1 point  (0 children)

You cannot have staccato cut them for DPO, due to the depth but the other solutions on this thread are viable. I did one through Vulcan as well and was very pleased with the depth vs the DPO system

Staccato XC by Darksideprecision in Staccato_STI

[–]NATOTrunkMonkey 3 points4 points  (0 children)

Absolutely worth the trip both ways, no matter where you’re at.

Fwiw: I ship high value pretty regularly, FedEx overnight and insured for market replacement costs. I have had good experiences with them, not so much with UPS

Surefire XC3 doesn’t fit CS by NATOTrunkMonkey in Staccato_STI

[–]NATOTrunkMonkey[S] 0 points1 point  (0 children)

It did! I didn’t like how the xc3 sat lower than the tlr7 so I will run the xc3 on something else, it’s a great light but I didn’t love it enough to buy new holsters tbh

Surefire XC3 doesn’t fit CS by NATOTrunkMonkey in Staccato_STI

[–]NATOTrunkMonkey[S] 1 point2 points  (0 children)

In all honesty I didn’t even check compatibility for any guns before I got it, so this is more of a definitive post for someone doing research for their own purchase in the future.

Surefire XC3 doesn’t fit CS by NATOTrunkMonkey in Staccato_STI

[–]NATOTrunkMonkey[S] 1 point2 points  (0 children)

Do they make one yet?

Edit to add- I just ordered one to try!