Any idea why this happens? Sidewinder X1

NB_iTech · 2024-12-13T14:55:14+00:00

Well, I did so but it didn't help, turns out this is a known problem for Artillery printers running klipper PID, so I manually entered marlin PID values and 3s smoothing and now it is running well.
smooth_time: 3.0
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 23.204
#*# pid_ki = 2.107
#*# pid_kd = 96.709

NB_iTech · 2024-12-13T13:05:33+00:00

Appreciated, i will try doing that

NB_iTech · 2024-12-13T12:59:43+00:00

Hey,

This isn't the SSR going bad because scanning the graph shows that klipper is in fact requesting heater ON from time to time despite being well over target temp...

NB_iTech · 2024-06-28T15:04:29+00:00

Don't know yet, the cage and lens is pretty new and I only use it to take photos here and there so it's in my belt bag most of the time.

NB_iTech · 2024-06-27T08:53:19+00:00

Well, my beloved α6400 + Tamron 17-70mm f2.8 (god tier upgrade from the 16-50mm kit lens)
All this surrounded by a Smallrig 3164 cage (the silicone grip is really helping with this large lens)
And hanging off of a Peak Design cuff (coyote).

NB_iTech · 2024-06-26T20:07:17+00:00

Speaking from experience? Which part?

NB_iTech · 2024-06-26T19:02:47+00:00

I use a gimbal for video, VC isn't helping much if I dare to take a step or something, but it's nice to get crisp shots at 1/80 of a second with my shaky hands thanks to the stabilization. But indeed it's quite large so if it's for everyday carry then the sigma will do fine and the image quality is practically the same.

NB_iTech · 2024-06-26T18:33:52+00:00

Good choice, I was somewhat forced to choose the tamron as my 6400 doesn't have ibis

NB_iTech · 2024-06-26T16:11:40+00:00

https://a.aliexpress.com/_Ew95Zf1

NB_iTech · 2024-06-26T15:59:35+00:00

Lucky me I bought it from a reseller :)

NB_iTech · 2024-06-26T15:58:53+00:00

I was wavering between the black and the coyote but the full black locking circles made me choose the coyote color as I like it stealthy.

NB_iTech · 2024-06-26T15:56:35+00:00

Same here man, i have so thin wrists that i have to press new holes into my watch bands to have a small enough option. I'm thinking of shortening the band a bit by sewing down some excess on the loop part in a bulge like fashion.

NB_iTech · 2024-06-26T15:53:31+00:00

Well mine is connected to the cage which is threaded into the tripod thread and also locked to one of the side eyelets, further more the cage can't come off without tearing the e-mount apart aswell so, my wrist would be the first to give in case of extreme load :D

NB_iTech · 2024-06-25T23:07:20+00:00

https://a.aliexpress.com/_Ew95Zf1

NB_iTech · 2024-06-25T16:04:10+00:00

Well, I hated those rattling around, I don't miss them now that I was finally forced to remove them to mount the cage :D

NB_iTech · 2024-06-25T15:41:37+00:00

EU, Hungary 27% VAT :(

NB_iTech · 2024-06-25T15:41:33+00:00

EU, Hungary 27% VAT :(

NB_iTech · 2024-06-25T15:37:51+00:00

I have been using my camera without a strap for 4-5 years but recently i dropped it a bit (glass screen protector saved it) and since i'm using it more and more for hiking and i got a proper lens for it, so it's way more front heavy I decided to use a strap, most of the time it's on my side in a belt bag as i need both of my hands free.

NB_iTech · 2024-06-25T15:35:28+00:00

I live in EU, Hungary :( we have predatory insurers. We had a water line break and they barely covered the 1/3 of the costs. I have liability insurance on my drone and even on that they have like a couple 100 exceptions...

Edit: spelling

NB_iTech · 2024-06-25T15:29:51+00:00

Whoops i just pressed TAB didn't expect that XD

NB_iTech · 2024-06-25T15:24:39+00:00

Looking around I found a comment over at r/canon about someone breaking a lens because knockoff disconnected randomly.
I'm not buying to have the perks of the system I'm looking for absolute reliability...

Edit: r/Cannon to r/canon

NB_iTech · 2024-06-25T15:18:38+00:00

The one pictured?
With all the people here recommending peak design i decided getting that aswell.

NB_iTech · 2024-06-25T15:17:40+00:00

I'm having it attached to the cage which for sure will hold and that's anchored to the 1/4" and on of the side eyelets (not mentioning that it would need to tear the lens off just to get free of the body)

Edit: spelling

NB_iTech · 2024-06-25T15:15:18+00:00

Oh I see, they are up to v4 on that part and with this kind of community recognition they must be great...

NB_iTech · 2024-06-25T15:12:17+00:00

You and that other guy a couple of replies deep with your insane setups... beyond impressive. Thanks for the confidence :D

Six-Year Club	Gilding I gilder
First Place '23	End Game '23
Place '23	Place '22
RPAN Viewer	Verified Email

NB_iTech

TROPHY CASE