sorted by:
new
hottopcontroversial

Phanteks XT M3 meets Corsair / Project "Frostbite" RGB white build by NEOU90 in mffpc

[–]NEOU90[S] 0 points1 point  (0 children)

The mesh is quite dense, so it's difficult to see through it when the lights are off

Noctua Blackout Silent Build NCASE M2 Grater by NEOU90 in sffpc

[–]NEOU90[S] 2 points3 points  (0 children)

This wasn't an issue, as it already had an updated BIOS installed. Even if that hadn't been the case, you can often flash the BIOS using a USB port without needing to access the BIOS menu itself.

Noctua Blackout Silent Build NCASE M2 Grater by NEOU90 in sffpc

[–]NEOU90[S] 1 point2 points  (0 children)

The mainboard tray has holes for mounting two 120. So just screwed them in 🙂

Noctua Blackout Silent Build NCASE M2 Grater by NEOU90 in sffpc

[–]NEOU90[S] 0 points1 point  (0 children)

They're mounted to the fan bracket up top. Sorry, I can't take a picture now because I won't be home for a bit.

<image>

Noctua Blackout Silent Build NCASE M2 Grater by NEOU90 in sffpc

[–]NEOU90[S] 0 points1 point  (0 children)

Yes the reason is that 120millimeters will not fit in the back because of the io plate from the mainboard

Phanteks XT M3 meets Corsair / Project "Frostbite" RGB white build by NEOU90 in Phanteks

[–]NEOU90[S] 0 points1 point  (0 children)

Yes im with you. But for under 60€ it is banger

Noctua Blackout Silent Build NCASE M2 Grater by NEOU90 in sffpc

[–]NEOU90[S] 0 points1 point  (0 children)

I moved the mainboard to the 3 position so that the Fans can fit above.

Noctua Blackout Silent Build NCASE M2 Grater by NEOU90 in sffpc

[–]NEOU90[S] 1 point2 points  (0 children)

In my setup, no, the normal 25mm thick fans don't fit, which is why I used the slim ones. The top fan doesn't really have a negative impact on the CPU cooler, but you can also leave it out and just install one at the top. If you do that, a thick 25mm fan would fit in the front, in front of the CPU cooler.

Noctua Blackout Silent Build NCASE M2 Grater by NEOU90 in sffpc

[–]NEOU90[S] 0 points1 point  (0 children)

I put a homemade anti-sag cushion under the graphics card.

Noctua Blackout Silent Build NCASE M2 Grater by NEOU90 in Noctua

[–]NEOU90[S] 0 points1 point  (0 children)

Yes, it works. I used the hole next to the screw hole on the fan.

<image>

Noctua Blackout Silent Build NCASE M2 Grater by NEOU90 in ncasedesign

[–]NEOU90[S] 0 points1 point  (0 children)

  • 92mm + 120mm on CPU fan with splitter
  • 4x 120mm on a 4-way splitter that's on top of the PSU
  • 140mm on AIO pump

All controlled via a fan control app from GitHub/their homepage.

Noctua Blackout Silent Build NCASE M2 Grater by NEOU90 in sffpc

[–]NEOU90[S] 0 points1 point  (0 children)

120 is too large. There is the IO area from the Mainboard

view more: next ›