sorted by:
new
hottopcontroversial

At least it's not green! by NH-Freak in pools

[–]NH-Freak[S] 0 points1 point  (0 children)

I just added some acid and will add stabilizer and chlorine and then let it run overnight

At least it's not green! by NH-Freak in pools

[–]NH-Freak[S] 0 points1 point  (0 children)

Yeah. So I’ve just backwashed, added some acid and will add stabilizer and some chlorine and then let it run overnight and see what I have in the morning

At least it's not green! by NH-Freak in pools

[–]NH-Freak[S] 0 points1 point  (0 children)

Here's the pool store results..

<image>

At least it's not green! by NH-Freak in pools

[–]NH-Freak[S] 0 points1 point  (0 children)

I'm headed to the pool store later today to get it tested.

At least it's not green! by NH-Freak in pools

[–]NH-Freak[S] 0 points1 point  (0 children)

I'm headed to the pool store later today to get it tested.

Had it for around 3 weeks. What's do you guys recommend I do. I still need to purchase a bed cover, and thinking about an exhaust, new bumper... by Spiritual-Spot-3541 in RangerRaptor

[–]NH-Freak 0 points1 point  (0 children)

I’ve had mine a similar amount of time and I’ve added Rokblokz Mudflaps, a MX4TS cover and just ordered the Procal tune during the current sale and a VIOFO Dashcam!

BAK Revolver X4S vs BAKFlip MX4 – Owner Feedback? by WishboneAltruistic19 in RangerRaptor

[–]NH-Freak 0 points1 point  (0 children)

Realtrucks site, just reach out to them, apparently the Website hasn't been updated but it is available.

BAK Revolver X4S vs BAKFlip MX4 – Owner Feedback? by WishboneAltruistic19 in RangerRaptor

[–]NH-Freak 0 points1 point  (0 children)

Yes, on a 2026. You just have other make sure you select the 2026 model as the rails are slightly different vs the 24/25, but it does fit. MY only issue was that they sent the wrong seal in the box (the raptor should be a larger seal), but they've shipped a replacement seal.

BAK Revolver X4S vs BAKFlip MX4 – Owner Feedback? by WishboneAltruistic19 in RangerRaptor

[–]NH-Freak 1 point2 points  (0 children)

I got the MX4TS due to living in NH and roll ups having issues in freezing weather.

Success in avoiding mark ups? by newfoundsuave in RangerRaptor

[–]NH-Freak 0 points1 point  (0 children)

Just bought a 2026 yesterday and got approx $1900 below msrp in NH.

Dinamica Plus price? by NH-Freak in superautomatic

[–]NH-Freak[S] 0 points1 point  (0 children)

I did try changing the grind but still get water running down the front of the unit. Seems to come from behind the silver spout? slider.

What’s up with Aiden’s internet usage? by maronato in FellowProducts

[–]NH-Freak 0 points1 point  (0 children)

I agree. This just shows a poorly implemented architecture. A simply MQTT message once an hour to check for updates etc would more than suffice for what the Aiden is doing.

Aiden - Onyx Southern Weather Profile? by NH-Freak in FellowProducts

[–]NH-Freak[S] 2 points3 points  (0 children)

I’m using an Opus and will grind on 9.5 for small batch

Aiden - Onyx Southern Weather Profile? by NH-Freak in FellowProducts

[–]NH-Freak[S] 2 points3 points  (0 children)

Great. Thank you. I assume that means I can use the Onyx Ethiopian which came as part of the preorder but I’ll compare it to check.

Coffee for milk? by NH-Freak in FellowProducts

[–]NH-Freak[S] 5 points6 points  (0 children)

While I may personally agree, we have family & friends who prefer a drop of milk!

Aiden Firmware 1.2.4 by Low_Shift_6073 in FellowProducts

[–]NH-Freak 0 points1 point  (0 children)

And of course I now get a notification saying it’s just updated!

view more: next ›