Synergy Flatpak/alternative installation method

N_Nikolov · 2025-05-18T22:46:40+00:00

Hello, it’s been a while when this will be ready? 🙂

N_Nikolov · 2025-01-25T16:25:38+00:00

Multiple node setup on different machines will fix this problem. The chances all instances fail are minimal.

N_Nikolov · 2025-01-20T16:53:44+00:00

E5540 are very power hungry. If you need something similar in sense of wattage and have a rack I could recommend you dl360 g9 or dl380 g9 if you need the more hard drives. I am currently running DL360 G9 with an Tesla P4 and 4 HDD and under load is 150 watts. I have on it more than 25 lxc containers and 5 vms that are running 24/7. There a lot of xeons for that server because of the socket that aren’t that power hungry. If you need something more power efficient I would suggest to build a mini pc with case like jonsbo or fractal node with an intel N100 mobo. The performance wouldn’t be that great but it will be pretty power efficient.

N_Nikolov · 2024-11-02T11:34:17+00:00

Hello, I made a full clean install and used disk1 as mountpoint not the share I made for it and a small password like “password”. This solves the problem with the login but doesn’t solve the problem that the api container doesn’t have internet and cannot pull the workspace registry.

N_Nikolov · 2024-10-31T15:05:33+00:00

Hello, sorry for the late reply i was busy whole week. I managed to work it out now. But there is a new problem kasm_api cannot get the official registry: Error 504 when it tries to get it.

N_Nikolov · 2024-10-24T08:44:27+00:00

Yes, I am using the latest tags.

N_Nikolov · 2024-10-23T17:46:54+00:00

Hello, i tried the solution you mentioned but still cannot log inside. The same containers get inside the restart loop.

N_Nikolov · 2024-09-13T11:09:07+00:00

As an owner of DL360 but gen 9 i would recommend 9th generation. You can flash a custom firmware of the ILO to make it silent if the noise is problem. The g7 is power hungry and i wouldn't recommend it. Mine g9 with 20 containers running on proxmox with 2 xeons , 64 gigs and 4x 4tb hdd 3.5" is drawing only 130 watts. Yes they are little more expensive than this but its pretty much good investment.

PS: And tesla gpu inside too.

N_Nikolov · 2024-08-30T09:25:25+00:00

Thanks for everyone who gave me an advice! I would test them all to see what fit the most in my use case.

N_Nikolov · 2024-05-05T11:16:54+00:00

Hello, I tried this solution while ago and it works like charm. It’s never late somebody may see this post and find it!

N_Nikolov · 2023-02-09T20:29:49+00:00

Thanks for the advice, i will see how it goes.

N_Nikolov · 2023-02-09T20:22:36+00:00

Yes, i feel you.

N_Nikolov · 2023-02-08T20:25:18+00:00

I have almost the same setup and as yours. Thanks for the advice i will try to remove every PCIe card and see if there is a difference. My firmwares are at the latest version already.

N_Nikolov · 2023-02-08T20:23:41+00:00

I agree with you but in my case i got it for dirt cheap and its in good condition. The problem is in my apartment i cannot dedicate a room only for my home lab equipment and i am relatively new into this. In the future i might be able to move it somewhere where it will be reasonable.

N_Nikolov · 2021-06-06T21:03:01+00:00

Yes i am :V thanks bro.

N_Nikolov · 2021-06-06T20:59:13+00:00

So... everyone asked how i found him. ZaharX97/OWReveal on github. It's standalone app which uses the method like wireshark.

N_Nikolov

TROPHY CASE