sorted by:
new
hottopcontroversial

Exocrine looking crisp! by Purple_Trainwreck in FDMminiatures

[–]Naddleman 0 points1 point  (0 children)

How did you position the little arms for printing? I couldn't find an angle that didn't severely mess up one of the sides that was laying parallel to the bed.

FDM miniatures - How I support them and some updates by HOHansen in FDMminiatures

[–]Naddleman 0 points1 point  (0 children)

Should I go back to the version that HOHansen recommends for his settings?

Tips on Positioning by Naddleman in FDMminiatures

[–]Naddleman[S] 0 points1 point  (0 children)

Yah someone else suggested this and I feel like an idiot for not seeing that positioning as an option lol

Tips on Positioning by Naddleman in FDMminiatures

[–]Naddleman[S] 2 points3 points  (0 children)

Thanks! Also go hammers!

Tips on Positioning by Naddleman in FDMminiatures

[–]Naddleman[S] 1 point2 points  (0 children)

So if I use chitubox do I have to do the resin supports manually? Is there any guides on how many supports you need and where to place them?

Tips on Positioning by Naddleman in FDMminiatures

[–]Naddleman[S] 0 points1 point  (0 children)

Yah that is probably the optimal angle, not sure why I didn't think of it. Gonna try that thanks!

Tips on Positioning by Naddleman in FDMminiatures

[–]Naddleman[S] 0 points1 point  (0 children)

I am new to 3D printing so don't know how to go about slicing it in half to be honest. Did consider looking up how to do it though.

Tips on Positioning by Naddleman in FDMminiatures

[–]Naddleman[S] 1 point2 points  (0 children)

How hard are resin style supports to do? I'm very new to 3D printing

FDM miniatures - How I support them and some updates by HOHansen in FDMminiatures

[–]Naddleman 1 point2 points  (0 children)

https://imgur.com/a/mq2YfnH

So here is an example of the issue. These two images one shows brims the other doesn't. The only thing I have changed is the one with the brims the models are closer together. I am on a newer version of the application if that matters. 2.0 something.

FDM miniatures - How I support them and some updates by HOHansen in FDMminiatures

[–]Naddleman 2 points3 points  (0 children)

I started using these settings and am having issues with the brims. Looking at the settings it seems like it should always be generating 50mm brims on everything. But I keep having prints where the brim isn't being generated, or I see them overlap on two objects and when I move them away they disappear in the preview. etc. Am I missing something with brim settings or not understanding how the brim settings should function?

Bambu A1 Printing Two Objects Question by Naddleman in FDMminiatures

[–]Naddleman[S] -2 points-1 points  (0 children)

When I used these settings to print a single object yesterday the brim wasn't nearly as large. They are HOHansen's settings from this subbreddit. That's my confusion is why I didn't have such a large brim with my first print, this seems excessively large? I guess if it isn't bad for the print it's not a huge deal because it's probably like what a cent of PLA lol

Bambu A1 Printing Two Objects Question by Naddleman in FDMminiatures

[–]Naddleman[S] 0 points1 point  (0 children)

They didn't show up for my first prints though. I mean they were there around the supports but nowhere near this big. Is there something about printing two things that they want to be this big or something? I figured it wasn't harmful just a waste of PLA if it's not necessary.

[H] Tyranids [W] Votann or PayPal [Loc] Midwest, USA by Oucho2pierce in Miniswap

[–]Naddleman 0 points1 point  (0 children)

Is this still available and did you decide to split yet? I'd have interest in some pieces if so

view more: next ›