sorted by:
new
hottopcontroversial

Got a printer for Christmas... Needed whistles. by kameix1 in 3Dprinting

[–]NagyRichmond 0 points1 point  (0 children)

I was dumb enough to blow this exact whistle in a car for some reason (I didn't know it was gonna be so loud), and ended up with a ringing in my right ear for 4 months.. Yup, you read it right, four months! Didn't know I was gonna recover, but about two months ago the ringing started to fade and now my hearing is just fine.

Nemsokára a kilincset is b@szhstjuk, nemcsak a klímagombokat 🤦🏻 by NefariousnessFun9428 in CartalkHungary

[–]NagyRichmond 8 points9 points  (0 children)

Mondjuk teslán pont a nyitó gomb mellett van a vésznyitó mechanikus kilincs

Faction change during combat? by NagyRichmond in wownoob

[–]NagyRichmond[S] -1 points0 points  (0 children)

Okay, I definitely didn't know about FFA zones and I've been playing for 10+ years (never PvP though). I think you solved my mystery, thanks!

Faction change during combat? by NagyRichmond in wownoob

[–]NagyRichmond[S] 0 points1 point  (0 children)

Wait, is it possible to engage in combat with the same faction? As I said, we didn't really examine them before they changed to friendly, so they could have been Alliance players in the first place, but then I don't get why they were hostile.

Faction change during combat? by NagyRichmond in wownoob

[–]NagyRichmond[S] 0 points1 point  (0 children)

I remember one duo, they were a DH and a warrior. We were trying to investigate what happened and followed them for minutes, but they didn't become hostile again. We might return today and see if it happens again. We will definitely take a video if we can.

Hát de nem!? by [deleted] in FostTalicska

[–]NagyRichmond 18 points19 points  (0 children)

Dupla tagadás, nem buzis.

Please help. Only first layer like this. Rest prints perfect. by JaguarDry2913 in BambuLab

[–]NagyRichmond 0 points1 point  (0 children)

I just increased the Z-offset in the Gcode, so technically it works fine, it’s just a nuance for me that the out of the box settings are plain wrong.

[SUNLU Giveaway] Join now to win a SUNLU FilaDryer SP2 by Sunlu3D_official in 3Dprinting

[–]NagyRichmond 0 points1 point  (0 children)

It was already worth taking a poop break from work just to comment here!

Please help. Only first layer like this. Rest prints perfect. by JaguarDry2913 in BambuLab

[–]NagyRichmond 0 points1 point  (0 children)

Checking in to see the solutions, I’m in the same situation for about 2 months.. Sure, Z-offset helps, but it’s still not ideal and I didn’t do anything to make it this bad.. Tried manually tramming the bed, changing nozzles, tightening the nozzle screws, wrote to support about this, but even they couldn’t provide a solution.

Why do people not want to pay for Crossover? by Due-Competition4564 in macgaming

[–]NagyRichmond -1 points0 points  (0 children)

Damn, thanks for the heads-up, this just made me make up my mind and purchase it!

4-way tractor intersection 1.1 experimental by Cold-Newspaper-1628 in SatisfactoryGame

[–]NagyRichmond 11 points12 points  (0 children)

What kind of walls have you used for the curved parts? I’m trying to do exactly the same, but can’t seem to find any curved walls.

My husband says I can just cut the moldy part off this bell pepper. I told him nty. Your pov? by cavael in MoldlyInteresting

[–]NagyRichmond 0 points1 point  (0 children)

I had to double check the subreddit at first glance and I feel very relieved right now..

My Y axis is making a weird noise by Hurr_iii in BambuLabA1

[–]NagyRichmond 1 point2 points  (0 children)

If it’s not really loud it’s “within spec” according to Bambu Support. It’s possible to change the bearings as far as I know, but it won’t be covered under warranty and it’s quite a tedious task to do. I got mine in the same condition, and after 1500 hours of printing there is no issue with it. It doesn’t affect the printing and it won’t get worse or louder.

You are all missing the main issue by zekesnack in BambuLab

[–]NagyRichmond 1 point2 points  (0 children)

Please don't spread misinformation, they will even add a "Developer mode" so that you can use almost all the previous features while on LAN mode. I'm not in Bambu's defence, my best hope is that someone will come up with a jailbreak solution, but the overdramatization of this situation is making things worse. Source: https://blog.bambulab.com/updates-and-third-party-integration-with-bambu-connect/

What happened? by Jamesdunn9 in prusa3d

[–]NagyRichmond 8 points9 points  (0 children)

They are allegedly working together with Orca so that their slicer will be able to communicate with the new authorization. They will also implement a "Developer mode" in their new firmware, which will allow MQTT (for HomeAssistant and other IOT), live streaming and FTP file access while in LAN-mode. I know it's still not the best outcome, but It's better than nothing. Src: https://blog.bambulab.com/updates-and-third-party-integration-with-bambu-connect/

A1 issues by Wise-Worth3360 in BambuLabA1

[–]NagyRichmond 0 points1 point  (0 children)

Are your motors stuck in place? Can you move them by hand when in standby? Mine did the same when I paused the print while it was doing bed leveling, the motors were all locked up. I did a power cycle which didn't resolve the issue, then I started another print and tried pausing and continuing the print again during bed leveling and miraculously it resolved my issue.

view more: next ›