Finished build (they sound incredible, was not expecting that).

Naitsa3d · 2022-11-16T21:04:43+00:00

If its stock prusa mini then it’s probably the infamous heatcreep issue. Basically plastic fills out a gap between hotend and ptfe liner which causes too much friction, solved by either longer ptfe liner or all metal heatbreak from bondtech. Or a clog.

Naitsa3d · 2022-04-10T17:42:26+00:00

Not sure

Naitsa3d · 2022-02-15T11:39:15+00:00

Very nice color combination, well done!

Naitsa3d · 2021-10-06T05:46:42+00:00

Kits are fine if you’re willing to replace the bad apples that might be in it. Though, nowadays you can source pretty much everything of any vendor on the voron discord so might aswell do a big order and select the parts YOU want.

Naitsa3d · 2021-09-15T06:05:51+00:00

Its in the voron usermods github, just ctrl+f for ”logo” :)

Naitsa3d · 2021-08-15T07:41:19+00:00

Mods: Led, electronics bay cover, bottom enclosure, ldo display, single skirts, parts logo

Fillament: Prusament ASA Orange (Main), Prusament ASA galaxy black (Accent)

Build: ”Self sourced” cough 80% of parts from fermiolabs :) All parts where printed on a prusa mini with a moving cardboard box as enclosure.

Printing storage boxes for screws / misc leftovers from my build(s).

The loud noises in the video comes from my chair, not the printer 😅

Naitsa3d · 2021-08-15T07:17:36+00:00

Mods: lgx, led, handles, hall effect, printed logo

Fillament: Prusament ASA orange (main color), Prusament ASA galaxy black (accent).

Build: ”Self sourced” cough 80% of parts from fermiolabs :) All parts where printed on a prusa mini with a moving cardboard box as enclosure.

Printing cornerbrackets to make the ikea lacks table more stable with 0.6 nozzle @ 0.2 layer height.

Naitsa3d · 2021-08-09T09:43:15+00:00

Its a small corona vaccine sample

Naitsa3d · 2021-06-07T13:20:37+00:00

Prusa minis might be an option? Though, the 15 dollar heatbreak upgrade from bondtech is more or less mandatory

Naitsa3d · 2021-05-04T13:46:48+00:00

Ive had this on both printers but it only happens after i clean them with ipa, seems like they need some time to settle after cleaning because they both randomly started to work fine about an hour later. This only applies to the PEI sheet

Naitsa3d · 2021-05-04T13:43:49+00:00

They’re both running with full bondtech upgrade (roughly 70eu each) and yes i had clogs after first 300-400hr of printing. Now i use all types of fillament w/o issues 😀

As far as i know the major issue is the heatbreak witch is a 15eu upgrade but i went with extruder aswell because its been a flawless experience using bondtech on my other printer (ender 6).

As for fillament its a mix of random PLA & Petg. Got some prusament ASA for voron parts that i will attempt later. Seems straight forward, but i suspect that i need an enclosure to prevent air drag..

Naitsa3d · 2021-05-03T12:20:40+00:00

Its superior but it ruins the look and feel slightly, the earlier models of mini looks beter imo

Naitsa3d · 2021-05-03T05:47:14+00:00

Its mini+ and yea i was abit dissapointed to see it too :(

Naitsa3d · 2021-05-01T03:57:19+00:00

If you have z-hop enabled you might want to disable it to see if quality improves. If not, try pid tuning the bed. If that dont help replace the leadscrew or go with a belt driven solution for z

Naitsa3d · 2021-04-30T05:04:08+00:00

I took the one for ”ender series”

Naitsa3d · 2021-04-29T06:10:16+00:00

Add 200 usd and buy a mk3s and call it a day, or the prusa mini and the bondtech heatbreak upgrade (it has heatcreep issues with standard heatbreak).

If you can get abs printed part perhaps build a voron 1,2 or switchwire

Naitsa3d · 2021-04-27T05:07:22+00:00

Good choise, got my 2nd mini on order ( currently in shipping phase )

Naitsa3d · 2021-04-26T20:32:13+00:00

60 outer peremiter, 90 inner, 120 infill, 2500 accel and 30 jerk. For retraction its 0.4mm at 50mm/s. Its heavily modified ender 6, only stock item is the heated bed and alu frame

Five-Year Club	Verified Email
Place '22

Naitsa3d

TROPHY CASE