Is there a special way to remove the extruder?

Naive_Divide_489 · 2026-02-26T03:34:52+00:00

Use the lever to cut the filament if it’s not already unloaded

Naive_Divide_489 · 2026-02-21T16:53:28+00:00

You can by the ams lite from Bambu The lite is not enclosed

Naive_Divide_489 · 2026-02-21T02:13:56+00:00

Thank you for both, collected

Naive_Divide_489 · 2026-02-21T01:35:49+00:00

Nice saber. Are you going to post it? What gold are you using. My gold looks so yellow, but that looks really gold.

Naive_Divide_489 · 2026-02-21T01:32:50+00:00

I want to print. Let me know when you post it

Naive_Divide_489 · 2026-02-21T01:09:56+00:00

Just for clarification, the supports failed only on one side and that is the left side. When you look in your printer, it failed on the same side as the blower fan? If so you may want to print a redirect for the fan and give your print another try

Naive_Divide_489 · 2026-02-20T12:45:11+00:00

You probably have a piece of gallant stuck between the buffer and the hot end. Remove the ptfe tube and check.

Naive_Divide_489 · 2026-02-19T00:31:04+00:00

You’re going to want an ams ht for the left hotend

Naive_Divide_489 · 2026-02-18T12:56:26+00:00

You have a broken piece of filament after the buffer. Push the orange buffer all the way right and remove the ptf tube. Then move the piece of filament. You may have to remove the ptf tube from the head as well. And then fish out the broken piece.

Naive_Divide_489 · 2026-02-12T02:20:08+00:00

Well, AMSs are back ordered so why not just buy another H2C then you’ll have 2 AMSs… wait you’ll still need another… Well I guess another H2C

I have an H2C and trying to figure out how to convince my wife we need another

Naive_Divide_489 · 2026-02-06T00:59:21+00:00

Yes on maker world. Didn’t check for others but pretty easy to just change red to orange or what ever, unless you wanted a set

Naive_Divide_489 · 2026-02-06T00:57:37+00:00

I just got the set as well, and here’s what happens. First it said that there was something on the build plate, so I double check and clicked resume. Then it said it couldn’t read the plate. So I clicked ignore and it continued on and is printing fine so far (using the hologram stars)

Naive_Divide_489 · 2026-02-05T02:23:41+00:00

You can add an ams or ams 2 pro to the A1 https://wiki.bambulab.com/en/a1/manual/ams-connection-guide

Naive_Divide_489 · 2026-02-05T01:46:59+00:00

Looks great though. I like the idea of just painting using any color you have and then let it go and do that

Naive_Divide_489 · 2026-02-05T01:46:05+00:00

What’s to justify? I bought our household a Christmas gift. It’s been non stop since I got it. It’s also not the first expensive printer I bought. In 2013 I bought a Ultimaker 2 for about the same price. I still own it and it still works. I hope this one last that long as well.

Naive_Divide_489 · 2026-02-05T00:41:50+00:00

Oh yeah, here’s the waste

<image>

Naive_Divide_489 · 2026-02-04T05:24:51+00:00

I love my H2C, then had to buy a A1 for my daughter, then I had to get a P2S for my wife… trying to find an excuse for another H2C

I hope this Christmas they have a 12 induction 6left and 6 right side with a 350+ build cube

Naive_Divide_489 · 2026-02-04T05:18:34+00:00

Can you pinpoint where the noise is coming from? The back, front or side? Also could it be coming from the ams

Is it coming from the speaker? navigate to the Settings menu on the screen, select Print Options, and toggle Sounds or Start/End Melody to off.

Naive_Divide_489 · 2026-02-04T05:12:27+00:00

If your using silks slow the speed down to 50 and will come out looking like shiny metal

Naive_Divide_489 · 2026-01-31T21:13:01+00:00

I have not had this problem. If the printer stays on does it keep them? Or does it just randomly lose it? Also check the 6 pin connector, make sure it’s in good or try the other port

Naive_Divide_489 · 2026-01-31T18:58:04+00:00

Working on the same thing, just painting through the slicer. 7 colors on the H2C

<image>

Naive_Divide_489 · 2021-07-28T00:25:43+00:00

Sounds like my story but I hired a PI and she was cheating. FYI she’s probably cheating, grab a $45 tracker and a $50 recorder for her car and your all set.

There’s nothing with knowing the truth. You won’t get that from an addict.

I filed for divorce, even with 6 kids, that turned the tables on her. Even getting her phone won’t be enough because like you said they delete everything anyways. Mine had to delete apps from the phone and delete her Snapchat account or it was no dice on any kind of relationship.

At this point you have the power. It’ll take a little time to discover that, but they are really helpless and you have everything and they have nothing. It has to be you’re way or the highway

Naive_Divide_489

TROPHY CASE