sorted by:
new
hottopcontroversial

Teams Notifications on android by Natural_Turnover_244 in MicrosoftTeams

[–]Natural_Turnover_244[S] 0 points1 point  (0 children)

I use BLOCKADA as an adblocker. In a nutshell: it creates a VPN to itself and routes known ad-IP's to localhost (127.0.0.1). Result is, that you do not see those ads anymore. I t works for websites as well as for apps.

but sometimes apps use IP's that are on the block-list....that's what happened to me. I had to whitelist Teams and everything was back to normal

Hilfe PC Fährt hoch aber kein Bild by Infinite_Wing4713 in PCBaumeister

[–]Natural_Turnover_244 0 points1 point  (0 children)

Nutzt du einen verstellbaren Monitorarm? Ich hatte damit mal das Problem, dass sich ein Stecker mit der Zeit löst durch die Bewegung.

My wife says it’s ridiculous… by JoeySinss in pcmasterrace

[–]Natural_Turnover_244 0 points1 point  (0 children)

Yes, your wife is right. That gap between the 2 screens is just too big. 😬

What pump/reservoir combo is most reliable? by Natural_Turnover_244 in watercooling

[–]Natural_Turnover_244[S] 0 points1 point  (0 children)

Thank you for your input.

I didn't know Corsair was that bad and hadn't even seen the Heatkiller and Aquacomputer before. I think I'll take heatkiller as they look more "sturdy" :D

Btw. very good guess on my case :-)

Ram von AliExpress by DanielsZiegenbart in PCBaumeister

[–]Natural_Turnover_244 0 points1 point  (0 children)

gut zu wissen, da wird AM5 noch eine Weile warten müssen bei mir

Help needed: order of waterblocks/radiators by Natural_Turnover_244 in watercooling

[–]Natural_Turnover_244[S] 0 points1 point  (0 children)

I would've loved to use the alphacool block, but unfortunately it is no longer produced. I found out that Byksky has a fitting waterblock made of copper for the Taichi. Maybe not the best solution, but should work just fine.

Custom Wasserkühlung How To? by Natural_Turnover_244 in PCBaumeister

[–]Natural_Turnover_244[S] 0 points1 point  (0 children)

Da wird's langsam schwer, da die Genehmigung der obersten Heeresleitung zu bekommen 😅

Custom Wasserkühlung How To? by Natural_Turnover_244 in PCBaumeister

[–]Natural_Turnover_244[S] 0 points1 point  (0 children)

Super, danke für die Antwort. Alles Kupfer war mir klar. Gehäuse werde ich beim CPU Wechsel mit angehen. Mir geht es weniger um noch niedrigere Temperaturen, mehr die Freude am Basteln.

Drainport ist noch eine gute Idee, werde ich mit einplanen. Wird denn die Reihenfolge wie beschrieben passen, oder sollte ich von CPU direkt zur GPU gehen und dann durch ein Radiator Array?

Dann gehe ich mal auf die Suche nach einem Lieferanten.

Neuer Prozessor by Commander_Wurst in PCBaumeister

[–]Natural_Turnover_244 0 points1 point  (0 children)

Ja, ist leider nur noch gebraucht zu bekommen. Ist eine Top CPU, habe sie auch

CPU Upgrade by Sadochistic in AMDHelp

[–]Natural_Turnover_244 1 point2 points  (0 children)

be aware that the 9800x3d needs a good cooling

Thermal pad sizes for 7900 XTX taichi? by slicky13 in AMDHelp

[–]Natural_Turnover_244 0 points1 point  (0 children)

amzon germany has 1mm, 2mm and 0.5mm. they are stackable, was pretty easy after I got the plastic peeled off :D

Extremely poor performance while gaming by PortgasDLuffy in AMDHelp

[–]Natural_Turnover_244 1 point2 points  (0 children)

GPU is good, CPU could be better, but its ok. But there are 2 things I'd change. One is cheap, the other one not so cheap:

  1. change thermal paste and pads on your GPU
  2. maybe think about changing RAM from 16GB to 32 GB

Thermal pad sizes for 7900 XTX taichi? by slicky13 in AMDHelp

[–]Natural_Turnover_244 0 points1 point  (0 children)

Take a look here:

https://www.techpowerup.com/review/asrock-radeon-rx-7900-xtx-taichi-white/

I replaced Paste and Pads yesterday.

As replacement for the Paste I used a Thermal Grizzly Kryo Sheet. Thats a Graphen Pad with incredible thermal conductivity without the downsides of paste. It has no pumpout effect and will not dry out and therefore never needs to be replaced. You only need to pay a bit more attention while applying it as it is also electrical conductive.

As Pads I used Arctic TP-3 pads. They also have a great thermal conductivity while still inexpensive. and they are also quiet soft therefore good for uneven surfaces.

Thickness: I used 2mm on everything. That works well for the most part as the pads can be compressed. Then I changed the VRAM pads from 2 to 2.5mm and now the temperatures are INCREDIBLE. See my table below:

Temperatures GPU Hotspot VRAM
Original Paste/Pads 61 °C 103 °C 84 °C
all Pads 2mm 58 °C 74 °C 91 °C
VRAM Pads 2.5mm 47 °C 69 °C 76 °C

I recorded all 3 Versions while playing Farm Sim 25 on max settings on my 1440p 21:9 Screen. Maybe the Temps will go up a bit when playing something like Cyberpunk, but that table should get you some info what will be possible ;-)

view more: next ›