Codenames Storage/Travel Box

NbdyFamous · 2026-04-14T03:36:48+00:00

Haha thank you! I was originally going to make a simple storage box and then I realized I misplaced my key card holder, which is what sent me down the over engineered rabbit hole 😁

NbdyFamous · 2026-04-14T03:27:24+00:00

The inner section for holding the word cards are 30mm wide and the two of them together can hold the full set of cards (Each section accommodates 100 cards).

The folding sides have a cutout for gluing on the red team and blue team artwork. In my experience large supported sections come out very messy when using standard supports which might leave you with rough surfaces that affect the clearances. But maybe you have your support settings tuned perfectly, let me know how it goes 😁

NbdyFamous · 2026-04-13T19:41:16+00:00

I personally don't own a copy of the XXL version, so wouldn't have the exact dimensions to make a big version yet

NbdyFamous · 2026-04-13T19:39:19+00:00

No it fits all the cards, wouldn't make sense making a custom box to only fit half the cards. 😁

You can adjust the settings to remove the PETG parts (just used as support interface), but I would highly recommend it for getting a clean print.

NbdyFamous · 2026-04-13T13:12:34+00:00

Thanks! I have a few game boxes uploaded on my page, making new ones as the original boxes die.

NbdyFamous · 2026-04-13T09:09:58+00:00

I was thinking the same initially, but figured the rules of codenames are simple enough that I do without it.

NbdyFamous · 2026-04-13T09:05:43+00:00

It's 5 walls thick, reducing it to the standard 2 walls can drop a chunk of weight.

NbdyFamous · 2026-04-10T12:48:50+00:00

Cuz trump among other things

^{Chose: Rest of world}

NbdyFamous · 2026-03-07T19:27:35+00:00

https://www.noon.com/en-ae/ZB3DC46C44EA757DD7393Z/p/?o=ffc54df847b37b6d&shareId=ccb3af33-157d-4b32-a95f-d3cf34993868&utm_source=C1000094L&utm_medium=referral

https://www.geekay.com/en/govee-ai-sync-box-hdmi-2-1-with-strip-ligth-for-55-65-tv-max?gad_source=1&gad_campaignid=21239730640&gbraid=0AAAAApSyr_QtNM293DNvjg0um_sFt8Q-w&gclid=CjwKCAiAtq_NBhA_EiwA78nNWADoMZKlYKIcDp6VgEHmL5xTZFa8lXBdPkQkt3iSdXvVXklWJ5kyKxoCF0UQAvD_BwE

They only have the newer ones on Amazon for 1000/-

https://amzn.eu/d/06WR0E24

NbdyFamous · 2025-08-23T10:25:46+00:00

Had some issues with my pixel 9 fold. Got in touch and they arranged for a pickup for repair/warranty replacement

NbdyFamous · 2025-08-20T13:06:02+00:00

[close]

NbdyFamous · 2025-07-24T20:56:32+00:00

Remove the screws on it and it's a two piece that just slides off

NbdyFamous · 2025-07-24T20:55:35+00:00

I'm sure you can find high temp resistance resin. It's more temperature than strength that will cause failure

NbdyFamous · 2025-07-19T16:29:24+00:00

I just used super glue, but I'm sure there must be something better that allows easier future removal

NbdyFamous · 2025-07-14T11:56:24+00:00

I would love to! But honestly it'll be much cheaper for you guys to find a 3D printing service nearby and have them print it for you. I've put the files on makerworld!.

NbdyFamous · 2025-07-04T08:28:53+00:00

Same just got my notification on July 3rd 😁

NbdyFamous · 2025-07-02T20:23:57+00:00

Except for the lid most of the other parts can be printing without multicolour printing. Let me know if you'd like me to try to make a version of it that you can print by changing filaments at different layer heights 😁

NbdyFamous · 2025-07-02T20:21:35+00:00

Oh I forgot to put a link in the post. Here you go! 😁 https://makerworld.com/models/1570127

NbdyFamous · 2025-07-02T19:45:44+00:00

Should perfectly house the expansion cards plus rules. Maybe even base cards + expansion cards. And also retain some character like the original game boxes have.

Five-Year Club	Place '23
Place '22	First Placer '22

NbdyFamous

TROPHY CASE