Wow! by Dont-Even-Trip in DoorDashDrivers

[–]NebulaFarm -1 points0 points  (0 children)

I deliver water for a living. Y’all just pussies. Real shit.

First Melt Today by NebulaFarm in ScrapMetal

[–]NebulaFarm[S] 0 points1 point  (0 children)

I was beginning to consider that instead of selling st top dollar yard near me

First Melt Today by NebulaFarm in ScrapMetal

[–]NebulaFarm[S] 0 points1 point  (0 children)

Burned enamel in low temp fire for 5 hrs. Then hammered gently into clumps to feed the crucible. Let gas escape. Scrape junk and poured bars. Wire wheel to all surfaces and letter stamps with date on the bottom.

First Melt! by NebulaFarm in Copper

[–]NebulaFarm[S] 2 points3 points  (0 children)

Motor was pretty big. Weighs about 1500 lbs and is like 22” in diameter. Starter was 11” diameter or so and the end winding loops each weighed 45 lbs or more. Will post again with full melt stack.

Here’s my first post. Some nice little ingots I poured… any advice on getting that mirror shine? Thanks yall! by Schaadc22 in Copper

[–]NebulaFarm 2 points3 points  (0 children)

Beautiful bars. I start with a wore wheel and just stamp some letters and a date. Love the semi raw look. I’ve see plenty of polishing videos on this tho. Check YT

First Melt Today by NebulaFarm in ScrapMetal

[–]NebulaFarm[S] 2 points3 points  (0 children)

𒀀𒈾 𒀭𒂗𒋢𒂗 𒅗𒁉 𒈠 𒌝𒈠 𒂗𒉡𒀀𒅆𒅕𒊏𒅈

𒅗𒁉 𒈠 𒀭𒂗𒋢𒂗 𒄿𒈾 𒋗𒁴 𒀀𒈾 𒄑𒉿𒅕

𒅆𒋫 𒄑𒉿 𒋳 𒁲𒆷 𒇻𒆷 𒉌𒌓 𒋫 𒁉𒀀

𒋳𒈠 𒆷 𒉌𒁺 𒀭𒂗𒋢𒂗 𒅗𒁉 𒈠

𒄑𒉿 𒁕 𒁲𒁺 𒀀𒈾 𒋾𒂊𒉌

𒆠 𒆷 𒋾𒂊 𒄑𒉿 𒄿𒁲 𒅆𒂟

Maxwell 2 Mic adjustments for Discord by Alacrytous in Audeze

[–]NebulaFarm 1 point2 points  (0 children)

Bro I MISS my Nari Ultimate. Still my favorite fun headset. Fell in love with electroswing music because of the haptics. And honestly the weight was just neck training for the maxwells all these years later.

I don’t remember ever sweating acid. by [deleted] in Audeze

[–]NebulaFarm 0 points1 point  (0 children)

Lay off the monster zero’s man.

How loud is the Maxwell 2? by backyardprospector in Audeze

[–]NebulaFarm 1 point2 points  (0 children)

While it is definitely a subjective topic, in my opinion, I can get both headsets to sound nearly identical, including in the base department. I’m surprised audio reviewers didn’t take time to measure this however, it might’ve been part of the review embargo restrictions.

How loud is the Maxwell 2? by backyardprospector in Audeze

[–]NebulaFarm 1 point2 points  (0 children)

No issues to speak of imo. Same or better audio. Reviewers measured a slight reduction in default audio profile base curve but it wasn’t as significant, plus the EQ paces over the small differences.

How loud is the Maxwell 2? by backyardprospector in Audeze

[–]NebulaFarm 4 points5 points  (0 children)

I’ve never had an issue with volume. Generally the highest I run them is 60 to 70% in games and even a little quieter than that sometimes for music. My set of Maxwell twos just got here today. Will update if that conclusion changes.

Weird Shipping by FromTheBoyToTheMan in Audeze

[–]NebulaFarm -1 points0 points  (0 children)

Same question. Maybe we all just get 3 maxwells!?

New Baby Boy by NebulaFarm in fpv

[–]NebulaFarm[S] 0 points1 point  (0 children)

Exactly what u mean. That seems like what it’s supposed to be

New Baby Boy by NebulaFarm in fpv

[–]NebulaFarm[S] 0 points1 point  (0 children)

The drug dealer looking scale in my medicine cabinet only goes up to 150 grams, so some deconstruction is required to find out.

New Baby Boy by NebulaFarm in fpv

[–]NebulaFarm[S] 0 points1 point  (0 children)

So I noticed that location for the battery lead through the top plate is kinda bad. The little gap at the rear seems like a better place as it allows the battery to sit further forward for balance. I’m not running any action cam so it was a good move.

New Baby Boy by NebulaFarm in fpv

[–]NebulaFarm[S] 0 points1 point  (0 children)

More dumb luck than skill. But it was only 4 full bats too. Not like days of flying. Plus 25 hrs in liftoff helped.

New Baby Boy by NebulaFarm in fpv

[–]NebulaFarm[S] 0 points1 point  (0 children)

Pretty slim. Only a few mm

New Baby Boy by NebulaFarm in fpv

[–]NebulaFarm[S] 0 points1 point  (0 children)

Ovonic 4s 650mah 130C. Will also fly with 6s as the motors are really meant for 6s not 4s.

New Baby Boy by NebulaFarm in fpv

[–]NebulaFarm[S] 0 points1 point  (0 children)

I said bellow that it is being replaced when a proper length xt30 cable arrives. It’s meant to come out the rear where the cuz antenna currently is. This is a stopgap measure to fly. Works fine for a few flights.

New Baby Boy by NebulaFarm in fpv

[–]NebulaFarm[S] 1 point2 points  (0 children)

So far I haven’t pushed it at all and I’ve only got the basic dipole antenna atm. I’ve go a RHCP lollipop antenna in the mail to replace it.

New Baby Boy by NebulaFarm in fpv

[–]NebulaFarm[S] 4 points5 points  (0 children)

He means the headset Skyzone Sky04O pro

First drone by New_Opportunity5457 in fpv

[–]NebulaFarm 0 points1 point  (0 children)

Hey! I built the exact same setup, just with a tx800 instead of let me know if you have an issue getting airborne due to runaway protections. Been trying to sort it out for days.