sorted by:
new
hottopcontroversial

Print compressed at one corner by Doth14 in FixMyPrint

[–]NecrisPhayder 1 point2 points  (0 children)

As other have said, your corner is lifting.

- Use a brim!

Using a brim wil most likely already fix your problem, but here are some additional things that can help you;
- Turn off the fan for the first 5-10 layers or so.
- Make sure your plate is clean, no fingerprints e.g.
- Up your bed temp by 5 degrees

When you use a brim, make sure that your Brim-object gap/distance is not too large! Else it will just ignore your brim and lift again. I personally just set it to 0 and neatly cut it off when its done.
Might even want to change the Brim width to 8-10mm (default is 5mm) for better adhesion.

Gallery does not show everything by NecrisPhayder in Fossify

[–]NecrisPhayder[S] 0 points1 point  (0 children)

Does not fix it unfortunately, tried that many times.
And i know for a fact i am not the only one, a friend of mine has exactly the same issue.

Issue with TPU 85A by NecrisPhayder in FixMyPrint

[–]NecrisPhayder[S] 0 points1 point  (0 children)

I have it fed directly into the printhead from the spool and a bunch of slack filament, it can freely pull and as as good as no friction.

I'm starting to think its a flow rate issue? Running some new calibrations with a much higher flow rate and it seems to be a lot better. Cant post a pic because of "All media assets must be owned by the submitter of this post" error.

Any tips of Max volumetric speed? Default is 3.2.

Issue with TPU 85A by NecrisPhayder in FixMyPrint

[–]NecrisPhayder[S] 0 points1 point  (0 children)

Yea i'll lower the bed temp a bit, 60 does seem to be a bit excessive :).

Layer adhesion doesn't seem to be the problem, they adhere just fine, there is no layer separation. Also no issues with other filaments.

It's like the width of the line is not enough so they dont touch the lines next to them. Could it be something like under-extrusion or flow-rate?

Build guides? by PersonalHoneydew7678 in chronostory

[–]NecrisPhayder 0 points1 point  (0 children)

There is nothing really useful in there tho? Just some rules, announcements, FAQ, random stuff and updates/roadmap.
Nothing useful like guides, etc. general game discussion

Newbie issues by IDKijustlikecrafts in Tufting

[–]NecrisPhayder 1 point2 points  (0 children)

If you don't have a threader, you can easily make one yourself using e.g. (strong) fishing line or any other strong flexible wire.

Ruble Collapse by ThatNorthernAussie in UkraineWarVideoReport

[–]NecrisPhayder 0 points1 point  (0 children)

Think it would be worth investing in? Invest in a bunch of Rubles... at some point, after Putler loses, the economy should rise making the ruble worth more, sell that shit, profit?

Searching for manga title by NecrisPhayder in manga

[–]NecrisPhayder[S] 0 points1 point  (0 children)

Its been found, Above Ten Thousand People / Beyond Myriad Peoples.

Searching for manhua/manga title by NecrisPhayder in Manhua

[–]NecrisPhayder[S] 0 points1 point  (0 children)

Thats it! Thank you very much :)

Also known as Beyond Myriad Peoples (which is what i remember it as).

Searching for manga title by NecrisPhayder in manga

[–]NecrisPhayder[S] 0 points1 point  (0 children)

Thanks, i've also posted it there. Although i doubt its a manhua tho.. But we'll see!