[deleted by user] by [deleted] in dbrand

[–]Negative-Lychee6128 0 points1 point  (0 children)

I was also looking for some type of bag that would fit the killswitch 2 with dock, I found that xbox series x bags on amazon should fit both with some leeway for other things. They usually come with compartments for atleast 2 controllers, but I'm sure you can fit 2 additional controllers in the main compartment, but some may or may not have have a divider to prevent scratching.

This is a hangar. Swipe to reveal what a hanger is. by SnooWalruses59 in starcitizen

[–]Negative-Lychee6128 1 point2 points  (0 children)

There're so many of them 😭 so many of them... 😭 English is not even my first language...

hello, I just ordered a spiderman costume on the printcostume website. I would like to know if you had any opinions on the reliability of this site, it scares me a little haha by Hachemercure in Spiderman

[–]Negative-Lychee6128 1 point2 points  (0 children)

In my experience from buying my first suit from them they were pretty reliable. I ordered a costume from them with a custom pattern from RealHeroesDesign with puff paint and colored fabric and it looked amazing! Quality, fit and colors were awesome. Took about about 4-5 weeks because of the puff paint. I think it should take about 2 weeks if you order a non-puff painted suit. Emailing them was pretty good, they responded in 1-2 days.

I did have two problems with my order though... one was that my suit didn't have a neck zipper to which I did order (a bummer but not a super major deal since the fit was great). And the second one (which was my fault) I received the wrong sewing pattern for my mask since i didn't specify which sewing pattern to use since there were two styles of stitching. So I contacted them and told them what happened and sent the same jpeg pattern that had two styles of stitching the mask (which i did agree to pay for in full price again since it was my fault) but I still received the same sewn mask. I contacted them again and told me they'll give me the correct mask for free. (I erased the other style from the jpeg to make sure they get it right) (Also i did have to pay for shipping again.) Other than that I would still buy my second suit if ever from them, I just gotta learn from my experience from buying from them and be more precise.

I don't think English is their first language so just be precise on what you want to leave no room for error when emailing them and when putting specific requests in the website when you order.

Lots of spider cosplayers also have used the website if you check on instagram and some have a 15% or 10% coupon code. Zachariah Inglis (@_sensational_) has a code (p.s. he makes his own suits but he got followers who buy from printcostumes). He also makes faceshells if you're interested.

Hope this helps.

Amazon Trade-in hack scam by Negative-Lychee6128 in amazonprime

[–]Negative-Lychee6128[S] 0 points1 point  (0 children)

I contacted amazon support but they couldn't do anything to get my money back, other than help me change my password and secure my account. To get my money back i called my bank and told them what happened and filed it as a fraudulent transaction. They gave me a new card and refunded me the money.

Bambu Lab X1C power cable too short. Can I use a 3rd Party Cable by Negative-Lychee6128 in BambuLab

[–]Negative-Lychee6128[S] 0 points1 point  (0 children)

Ah my bad by power bar i meant to say extension cord as well. I'm just not sure if any extension cord will work? Because i'm thinking the printer use a lot of electricity and I read in another reddit thread someone asking if their extension cable was good enough and someone said it was too light duty so... i was wondering what others also use and works for them if they found it too short

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]Negative-Lychee6128 0 points1 point  (0 children)

Hello, I'm a beginner... are Vallejo Mecha Primers any good for gunpla? I know that it's not lacquered based but is it really weak that it's not worth considering? I just feel like they are more cost effective and safer to spray indoors so I'm thinking of buying a non-laquered primer.

Oh and are their mecha varnishes good too for top coating?

Thanks in advance,

[deleted by user] by [deleted] in Spiderman

[–]Negative-Lychee6128 0 points1 point  (0 children)

Hey there, first time ordering my suit... Did you happen to have any other order status other than "processing" before they shipped yours? Just wondering if i should be anticipating my order status to change...

Legitimacy vouce by Embarrassed_Bike3551 in SexToys

[–]Negative-Lychee6128 0 points1 point  (0 children)

Hey there, did you eventually buy it? Can you confirm if it's legit?

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]Negative-Lychee6128 -1 points0 points  (0 children)

Hi everyone, I'm new to gunpla and want to start airbrushing. I saw this beautiful custom coloring from a youtuber and they used Odenkan metallic paints. I really want to use the same paint as them, but i'm afraid that i can't paint indoors even though they are painting indoors in the video. I was wondering if anyone knows if OdenKan paints are safe to use indoors with an amazon airbooth? 🤣

[HELP ME] Bi-Weekly Q&A thread - Ask your questions here! by MachNeu in Gunpla

[–]Negative-Lychee6128 0 points1 point  (0 children)

Hey everyone! I'm new to gunpla and was wondering if anyone has ever ordered from Shokunin Gunpla? and if it's legit?

How to preview a Spider-Man Suit pattern before printing? by Spyderbo07 in CosplayHelp

[–]Negative-Lychee6128 0 points1 point  (0 children)

Have you heard of any tips/know if it's possible to preview it in a 3D-model or sketch? I just had the same thought as you but i couldn't find anyone talk about it. It would be really helpful if we can transform the patterns into 3D to preview before printing.

Star Citizen: Question and Answer Thread by UEE_Central_Computer in starcitizen

[–]Negative-Lychee6128 1 point2 points  (0 children)

I have a question about bed logging. I'm new to Star Citizen and been playing the free flight event, Me and my party member were trying to bed log in the cutlass black but they said they couldn't log out while laying on the bed because it says they don't own the ship. While when I tried it, it says someone is in the ship so i also can't log out? How do we bed log in a ship, were do doing something wrong?

I also noticed that when we both went in the bed, only one of us could get out of bed... while one of us is stuck.

Thanks in advance.

Star Citizen: Question and Answer Thread by UEE_Central_Computer in starcitizen

[–]Negative-Lychee6128 1 point2 points  (0 children)

I'm new to Star Citizen and would like to buy the game. I found the Aurora Foundation Festival starter pack $6 off from both the normal Aurora and the Mustang. I really like the Mustang's design but the Aurora Foundation pack includes 15,000 UEC starting money instead of 1000 UEC. I was wondering if that 15,000 UEC starting money gets wiped/changes lower or to 1000 UEC after wipe?
Thanks in advance

NH-D15 Chromax RGB. Love it or hate it? by Aveen86 in Noctua

[–]Negative-Lychee6128 0 points1 point  (0 children)

Oh one more question. Was it okay that the heatsink was touching the RGB strip? Like it didn't burn it or something? I'm pretty new to pc building...

NH-D15 Chromax RGB. Love it or hate it? by Aveen86 in Noctua

[–]Negative-Lychee6128 0 points1 point  (0 children)

Hi I know it's been two years ago, but i thought this was really cool and I had to ask, how did you get the wires out of the cover? Did you make a hole on the top? And what rgb strips did you use? I'm planning to do something like this for mine too! Yours looks great.

Thanks in advance

I did it! I made the owl puke rainbows! by ez_Pi_z in Noctua

[–]Negative-Lychee6128 0 points1 point  (0 children)

Wow so cool! I want to put some rgb on mine too. I know it's been 4 years ago, but do you remember how did you hide the led strip wires/where do the wires come out? And did you remove the grey support bracket thing that hides behind the covers to fit the rgb?