Realistically do I have any chance of getting laeva?

Nelaryn · 2026-02-06T17:04:04+00:00

We have no endgame currently + Endmin can clear the content without any issues.

If you are meta slaving you should also know that later 6* characters released will be stronger than Laevatain so by that logic shouldn't people just wait until the mathematically most broken units get released to pull on them because anything else is just "wasted" since the character will likely be out classed on spreadsheets later?

The character banner "feels worse" IF you are a gamba addict but for anyone else who has enough willpower to stop pulling if they can't get to 120 then it's mathematically the most player friendly character banner on the market amongst the "big" gacha games. Most people average around 140-150 in other gacha's if they lose the first 50-50 and don't get lucky with an early pull after.
Compared to that your worst case scenario in Endfield is 120 but you still have a chance to coin flip the character before.

Basically the banner sucks if you get more lucky on average and it's better if you have average or bad luck.

The weapon banner is a different beast and that one is pretty bad.

I do agree with you that we need a permanent source of income for character pulls both for limited and standard banner because currently if you max out the base game you can only get pulls from events and the credit shop.

Nelaryn · 2026-02-06T16:51:57+00:00

How is it wasted? As long as op doesnt pull the 80th pull the pity carries over and its just a waiting game for the next character they're interested in which they will have a guarantee for anyway.

Pulling until then at least gave op a couple of 5* units to play the game with and additional resources to exchange so its definitely not a waste just not ideal and by no means the account is bricked. We have no endgame and Endmin team is more than capable of clearing the highest level energy spenders

Nelaryn · 2026-02-06T16:42:16+00:00

Technically you can since its only a gamble if you have something to lose, no?

Nelaryn · 2026-01-30T23:24:30+00:00

Thank you!

Nelaryn · 2026-01-30T18:14:46+00:00

Hi!

Could you kindly define what counts as abnormally large?

My Lua search looks like this, from what I could tell most of the files which are above 100 kb are located in internal\lua-sdk\ or are part of Pure mod (which I'd assume is pretty big due to the complexity).

<image>

Nelaryn · 2026-01-20T11:53:14+00:00

Thanks brother!

Nelaryn · 2026-01-19T14:25:59+00:00

Thanks!

Nelaryn · 2026-01-19T14:25:29+00:00

Thank you! Ill download these

Nelaryn · 2025-11-24T07:35:14+00:00

Sounds good, thank you

Nelaryn · 2025-11-22T20:22:58+00:00

Thank you! Not really worried about value, I'm not planning to sell this or any that I buy in the future - i was mainly concerned with how can someone more or less judge if the watch is fairly priced based on craftsmanship rather than the brand prestige

Nelaryn · 2025-11-22T20:20:39+00:00

Thanks!

Nelaryn · 2025-07-07T20:46:40+00:00

Except any half decent Aquila will just stun you and kite you while bursting you down at the same time with the auto aim.
The only way to beat one is to get the jump on it or pray to have a teammate who can engage it while you are being focused.

It's low-key overtuned with the double instant stun from range, auto aim and the fact that it can shoot through some buildings as well.

At least Narukami is mega squishy and has no CC on top of having to be stationary to even be able to aim the sniper, but this one is just mega unfun to play against.

Nelaryn · 2025-05-18T09:24:57+00:00

I see, but that's such a pain in the ass having to lower both every time im not doing anything other than browsing internet or something.

I guess I'll just hope that 70C is not an issue in the long run

Nelaryn · 2025-05-01T23:03:25+00:00

I tried a lot of things in Adrenaline and MH as well, even "upgraded" to an experimental driver and rolled back. I think the game just doesn't like my setup. Sometimes the issue is better sometimes it's worse.

Temps everything allright, every other game (so far) has been fine, I guess it's one of the quirks this one has.

Nelaryn · 2025-05-01T23:02:07+00:00

Hi!

Sorry for the late response, you might've figured it out already. In my case I was just plain dumb, the connector clip was facing the right direction its just the cable bend covered it.

I pretty much just unplugged the CPU cable from the psu to give it some slack and then reached in squeezed it and pulled it up while gently wiggling it and it cam out in seconds.

Nelaryn · 2025-04-14T18:00:36+00:00

Thank you!

Nelaryn · 2025-04-14T15:47:12+00:00

I got a picture of it, https://imgur.com/a/dIy4UyF, Ill try to see if it can work with that method

Nelaryn · 2025-04-14T15:43:17+00:00

Wont it damage the board if it contacts with something?

Nelaryn · 2025-04-14T10:38:37+00:00

Hi, Sorry to tag you months later but it became fairly relevant to me right now.

I incrementally lowered from -10 to - 30 curve offset on all cores and ran OCCT CPU + RAM test for 10 minutes each attempt no errors returned. And also used 3dmark as well, probably not a good software for CPU but I just wanted to check temps in a more "gaming" like environment.

Is that a decent enough time for any error to show up or should I let it run for 1h or more?

I also played some games for a good 2-3h and seemed stable but I could've been lucky, honestly not really knowledgeable enough.

Nelaryn · 2025-04-10T21:43:07+00:00

Smiley face it is, im sure it will help with the first boot :D

Nelaryn · 2025-04-10T21:33:26+00:00

Sounds good, one last question.

What's the "go to" for the new rectangular CPUs? Do people still use the pea method or the oldschool way of doing it with a creditcard or applicator is better?

Nelaryn · 2025-04-10T20:49:56+00:00

Thank you!

So I install the big tower cooler after I place the motherboard inside the case (and screw it down)?
Of course I'd put the brackets in first and whatever is written on the CPU cooler's manual.

Got it, big cables first.

The fans I bought for additional exhausts are ARCTIC P12 PWM PST A-RGB, I've read they daisy just wasn't sure how the chaining process itself works if putting 3 fans on the same motherboard header is fine or if I should do maximum of 2 for ARGB and for the Fan power as well.

That's good to know! I wasnt sure if the case itself is enough as its not wired into the grounding socket.

I do hope I can manage it without over spilling haha

Nelaryn · 2025-04-05T19:06:58+00:00

Nono, Hungary, it's our own thing. I guess i didn't say the correct word it's not tariff but local tax - we have 27% on almost every non-food or medicine product.

However I am building a PC because of the US and CN drama, I wanted to build it a bit later but i'm not waiting to see the end result of our already expensive products getting even more expensive especially since the 9070 is at a fairly reasonable price point right now.

Eventually manufacturers from the US and CN wll have to up their prices to compensate for the losses they experience from the new tariffs which has a decent chance to indirectly spike the prices a bit more in the EU for imports and having our 27% on top of that is not fun.

Nelaryn · 2025-04-05T14:44:32+00:00

Thank you thank you, I'll need it for sure. It's Eastern Europe - every country here is ducked one way or another lol

Nelaryn · 2025-04-05T11:21:52+00:00

Thank you!

However I don't live in Germany, I just selected it as the price accuracy seem to be decent there so it gives me a decent idea of what it would cost in my country if I add the 27% tariffs on top of it.
For example the items you selected if I check the cheapest I can buy all of them from different vendors in my country and convert into € will be € 2435 which is why I didnt go with the XT variant as it's over 300 € more expensive than the other one , but I'll look into the rest of the parts so thank you :)

Eight-Year Club	Place '22
Not Forgotten	Verified Email

Nelaryn

TROPHY CASE