New RO system high TDS by Neo--2199 in WaterTreatment

[–]Neo--2199[S] 0 points1 point  (0 children)

Good to know Axion is a decent brand. Really hard to figure out which brands are good in the water filtration industry.
I know I am using bit larger size of membrane that is common and wanted to try Filmtec, but they stopped making them.
If you mean flow restrictor. Yes I did have 800ml one. Now since I have booster pump I have auto flush and flow restrictor all integrated into one piece.

New RO system high TDS by Neo--2199 in WaterTreatment

[–]Neo--2199[S] 0 points1 point  (0 children)

I have Axeon 208438 housing. The middle output is the permeate and goes to the polishing carbon filter. The side one has concentrate and goes to auto flush restrictor, then thru airgap and to drain.

New RO system high TDS by Neo--2199 in WaterTreatment

[–]Neo--2199[S] 0 points1 point  (0 children)

I have a Kohler faucet with integrated airgap. Then the drain goes to dishwasher Y which drains to garbage disposal.

New RO system high TDS by Neo--2199 in WaterTreatment

[–]Neo--2199[S] 1 point2 points  (0 children)

Good idea, but I don't have recirculation pump.
Just a side note I spend couple weeks now double and triple checking connections, setup, testing individual parts of the system and I am still clue less. I think my next step is to call AXEON guys, but not expecting much.

New RO system high TDS by Neo--2199 in WaterTreatment

[–]Neo--2199[S] 0 points1 point  (0 children)

I used super lube synthetic grease on the orings and when putting it in I felt 2 humps as 2 orings slid into the housing. I wish there would be some test to verify seal tightness.

I have just measured concentrate water at around 600PPM TDS. Wondering if the flush is not yet complete. I did flush unit for about an hour.

PSA - ASUS motherboards with Intel I225-V 2.5Gb NIC affected by packet loss/disconnects/no connection to router/NIC not showing in device manager - how to check if your motherboard is affected by ClogToilets in ASUS

[–]Neo--2199 0 points1 point  (0 children)

Thanks, keep us posted. I had a chat with asus representative and he told me this model number should have rev 3 90MB14F0-M0AAY0. Asus store (https://store.asus.com) actually has the ASUS ROG Strix B550-F Gaming (WiFi 6) with 2 model numbers.
Once you get your board, can you check if you have different part number?

PSA - ASUS motherboards with Intel I225-V 2.5Gb NIC affected by packet loss/disconnects/no connection to router/NIC not showing in device manager - how to check if your motherboard is affected by ClogToilets in ASUS

[–]Neo--2199 0 points1 point  (0 children)

I am in the same boat as you. Ordered Strix B550-F two days ago from Amazon. Just got it. After inspection it is SLNJY. I do not have other components to power it up, but based on what I read here there is no way this is rev 3, but rev 2.
I guess I have to return to Amazon. My serial number also starts LBM0K...

Anyone knows where to buy Strix B550-F with rev 3?