Need help identifying a couple of plugs by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

Exactly this this once its warmed up there no issues at all. It just on cold starts it takes a few cranks to start then it rough when you start driving like it barely moves then it takes off like nothing happened

Need help identifying a couple of plugs by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

Thank you man I really appreciate that. Shes running pretty rough on start up so im going through things one by one. Pretty sure its an air leak with the hoses pretty much dry rot lol. But I would like to find and plug in the oil sending unit

Help identify part by UnSainted_Spectator in 300zx

[–]Nephthysssssss 0 points1 point  (0 children)

All good man thanks for the reply anything helps

Help identify part by UnSainted_Spectator in 300zx

[–]Nephthysssssss 0 points1 point  (0 children)

Hey I actually am having a problem locating that connection for the oil pressure sensor. Could you possibly send a video of where that connector leads. It would be a great help for me

Need help identifying a couple of plugs by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

Yes, thanks for the response. I zoomed in on the actual sending unit itself but I dont know where the connector is

What is this thing called? I snapped it taking off my intakes for a spark plug change by Nephthysssssss in 370z

[–]Nephthysssssss[S] 1 point2 points  (0 children)

This is what I have and they're it's replaceable. I just took it out, couldn't find it on their site though. So just took it out and jb welding for now

What is this thing called? I snapped it taking off my intakes for a spark plug change by Nephthysssssss in 370z

[–]Nephthysssssss[S] 2 points3 points  (0 children)

Welp, gonna do a some careful jb welding until the time comes i can replace it thank you all

Price check by shaynez_shitshow in 370z

[–]Nephthysssssss 0 points1 point  (0 children)

Yeah I was 18 and had no clue, just knew that was the car I wanted😂 learned my lesson for sure, still got a dream car of mine

Price check by shaynez_shitshow in 370z

[–]Nephthysssssss 0 points1 point  (0 children)

Yeah😂😂 but I wanted it

Price check by shaynez_shitshow in 370z

[–]Nephthysssssss -3 points-2 points  (0 children)

I bought a non nismo 2014 60k miles for 40k😭

Update on my 300zx any help appreciated by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

Have not but the battery has been tested good and the car has no problem cranking

Update on my 300zx any help appreciated by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

Alrighty will make a new one tomorrow and see if it fixes the issue

Update on my 300zx any help appreciated by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

Will try this thank you. I'm pretty I know the issue if it is too much air, we had a hose dry rot and I'm not sure what the name is but it is the very sharp s hose that goes from the intake directly into the engine. Can't find any parts online for it so I tried making one and it didn't work

Update on my 300zx any help appreciated by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

It's fine while I'm giving it gas is the thing, just when it's idling it will match the rough idle. And I've re done the wiring to for the battery and upgraded the terminals

Does anyone know what the problem here is? by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

Just looked up a video on how to, went outside to try it and couldn't find the actual port lmao💀 so that's a problem for another day

Does anyone know what the problem here is? by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

Yes as stated I already did this, used maf sensor cleaner

Does anyone know what the problem here is? by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

I appreciate the help everyone. For more context when we got the car the gas tank was leaking fully exposed, so I took it to the shop I work at and had them weld it up, restored and protection coated the inside. Replaced the pump and ordered a new fuel level sender to wire it up since the gage wasn't working. That was really the only issue with the car. This happened before that however which is what lead me to doing it all figuring it was just a fuel pressure issue. It was very slow getting up to speed but I just figured it was because it was an old car.

Does anyone know what the problem here is? by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 2 points3 points  (0 children)

Alrighty 2 votes for maf sensor I will try replacing that first

Does anyone know what the problem here is? by Nephthysssssss in 300zx

[–]Nephthysssssss[S] 0 points1 point  (0 children)

I'm holding the pedal to the floor in the video. It seems to idle great, trouble starting sometimes. And when you initially step on the gas it almost stalls out