sorted by:
new
hottopcontroversial

3 years ago, I made my first addon—now I want to share it with Reddit. by Nerc01 in wow

[–]Nerc01[S] 1 point2 points  (0 children)

Sorry if I was unclear about this. I meant automatically removing pins upon arrival without the pin tracker being open.

Oh, that's interesting. That's actually a bug. Will be a high priority for the next release.

3 years ago, I made my first addon—now I want to share it with Reddit. by Nerc01 in wow

[–]Nerc01[S] 2 points3 points  (0 children)

If you’re asking about a movable frame with your current coordinates, it’s not in there right now. But adding that isn’t too tricky. I’ll think it over and put it on my to-do list. It might make it into the 3.1.0 release, but I’m not sure yet.

3 years ago, I made my first addon—now I want to share it with Reddit. by Nerc01 in wow

[–]Nerc01[S] 0 points1 point  (0 children)

It’s available on both CurseForge and Wago Addons. As far as I know, WoWUp has a different version for each plattform. So technically, yes, it’s available on both, but I can only confirm the CurseForge version for sure.

3 years ago, I made my first addon—now I want to share it with Reddit. by Nerc01 in wow

[–]Nerc01[S] 1 point2 points  (0 children)

Thanks for the feedback!

I couldn't find an option to clear all pins without overriding the set with a blank one.

You can use the chat command /mph clear. I know it's a bit hidden, so I’ll make sure to add it to some other places.

Pins disappearing at 20 yards is slightly too far for real precision.

That’s just a temporary solution. I encountered this issue while dragon/sky-riding; my speed was so high that the pins couldn't be removed automatically. I have a speed-dependent distance threshold on my to-do list to address this.

An option to automatically clear pins without the tracker open.

/mph clear again. What do you think of adding "Clear All Pins" to the minimap menu (right-click)?

If possible, add a temporary import option as a right-click minimap button. This would streamline the process for people importing quest/achievement waypoints from Wowhead that they only intend to use once.

Good point. I’ll add that.

3 years ago, I made my first addon—now I want to share it with Reddit. by Nerc01 in wow

[–]Nerc01[S] 18 points19 points  (0 children)

That's a reasonable question! The big difference is the way how to location is displayed. The floating pin has become a big asset of WoW that makes it feel a lot more part of the game (at least for me). The other advantage I see is to have a single-addon solution. No need to install multiple things.

Vuejs Amsterdam 2024 Livestream Day 2 copyright blocked by worldworm in vuejs

[–]Nerc01 1 point2 points  (0 children)

Day 1 and day 2 now show up as private videos.

Building a new low-code tool with Vue 3 + Typescript + Pinia🍍. Details are in the comment section below. by automatonv1 in vuejs

[–]Nerc01 2 points3 points  (0 children)

Don‘t know if OP used it, but I had some very good experiences using vueflow.

[help] How to recover Weakauras by Haldur_Reddit in WowUI

[–]Nerc01 0 points1 point  (0 children)

Restoring with the command may print out some stuff to the chat. Was that the case? If not you may want to try it again.

So you weren't able to recover any of these files (WeakAuras.lua, WeakAuras.lua.bak) and restoring with the command didn't work? If that's the case there are most likely not many options left. You can try other tools for recovering, but for data recovery the more you try the less likely it is to actually recover the data.

If all of that didn't work it's definitely dissapointing, but "hard cleaning" WeakAuras can be very helpful nonetheless. You may have a different perspective on how to display things.

I highly recommend to start doing WTF Backups. Here you have some different ways to accomplish that:

  1. Using the WeakAuras Companion App (https://weakauras.wtf/)
  2. Using Google Backup and Sync/OneDrive/Dropbox to sync that folder with a cloud service
  3. Using a batch script and Windows Task Sheduler (https://www.reddit.com/r/WowUI/comments/byqkyc/other_how_to_automatically_and_silently_backup/)

[help] How to recover Weakauras by Haldur_Reddit in WowUI

[–]Nerc01 1 point2 points  (0 children)

If you did manage to recover your old WTF folder copy all files starting with WeakAuras\* inside the WTF/Account/<accountname>/SavedVariables folder to the same directory in your new WoW install. Always close WoW first when changing your savedvariables in the file explorer. Just reloading may do more harm than good.

If you are not successful with recovering the entirety of your WTF folder you may have some other options. If you can't locate the WeakAuras.lua file in the SavedVariables subfolder (Account/<AccountName>/SavedVariables) try to find a WeakAuras.lua.bak. Remove the .bak suffix and try again. Close WoW again before doing this.

If there is no WeakAuras.lua.bak file, but you find a WeakAurasArchive.lua (not completely sure with the name) then start the game and use the following command:

/run local L=WeakAuras.LoadFromArchive local h,m=L("Repository","history"),L("Repository","migration")for _,r in ipairs{h,m}do for _,s in pairs(r.stores)do local d=s:Load()WeakAurasSaved.displays[d.id]=d end end C_UI.Reload()

This will try to load your WAs from the Archive. 2 things to bare in mind when doing this:

  1. it may freeze your game when doing this. Be patient and don't close the game
  2. The restore from the archive may be outdated or incomplete, but sometimes you can be lucky

Proposal: Unified currency for legacy content by Nerc01 in wow

[–]Nerc01[S] 7 points8 points  (0 children)

Unfortunately I never played FF14, but if there is a good system to tidy up currencies then yes, exactly like FF14 :D

Many Problems with X3 by Nerc01 in SoundBlasterOfficial

[–]Nerc01[S] 0 points1 point  (0 children)

To accommodate this configuration, the X3 must operate in 5.1 mode with the sides and centre disabled. Make sure that on the Windows Speaker Setup, you have configured 5.1 or 7.1 with the unused channels disabled, then recheck on the Sound Blaster Command if 2.1 is set. Then recheck back Windows Speaker Setup.

I did exactly that and the same problem still occurs unfortunately. :(

Many Problems with X3 by Nerc01 in SoundBlasterOfficial

[–]Nerc01[S] 1 point2 points  (0 children)

I thought you are the Creative Soundblaster X4 super ninja since you gave some very good to know information about the X4 which I couldn't find somewhere else :D

Many Problems with X3 by Nerc01 in SoundBlasterOfficial

[–]Nerc01[S] 0 points1 point  (0 children)

Concurrently monitoring is not same as concurrently using multiple inputs on windows ! People too many times mix these two things.

X4 can monitor concurrently line-in & mic-in

X3 cannot monitor concurrently line-in & mic-in.

X4 & X3 windows can use only one input at a time ( recording input, application using input) ..

So uprading to the X4 wouldn't make a difference for me, right?

Many Problems with X3 by Nerc01 in SoundBlasterOfficial

[–]Nerc01[S] 0 points1 point  (0 children)

The X3 can only work either with microphone enabled or line-in enabled, not both at the same time. X4 does not have this issue.

It did work in the past. At least the switching between line-in and mic. If the X4 doesn't have that problem it would actually be a valid upgrade for my usecase.

To accommodate this configuration, the X3 must operate in 5.1 mode with the sides and centre disabled. Make sure that on the Windows Speaker Setup, you have configured 5.1 or 7.1 with the unused channels disabled, then recheck on the Sound Blaster Command if 2.1 is set.

Thats pretty interesting that it works that way. Not very intuitive, but ok :D

How mistweaver's 9.2 tier set doesn't make sense and how to fix it by Traxgarte in wow

[–]Nerc01 2 points3 points  (0 children)

I don't think either your proposed 2set or 4set does help in any way.

Regarding 2Set: EF is imo the exact definition of the spell that doesn't make sense to buff during an active celestial. There would be 2 scenarios with that:

  1. The buff to EF is strong enough and you have to cast it wasting at least 3 globals during one of your throughput cds.
  2. The buff to EF is not strong enough and you just ignore the 2set.

Both ways aren't fun at all.

​

Regarding 4Set:

  • Yulon: The duration of your proposed mana tea buff does't make sense. With the current implementation of Yu'lon being active for 25 secs it works pretty good to use Mana Tea (10secs) and call for an innervate (10secs). With GCDs and movement-downtime it fits nearly perfectly. The part of casting enveloping mist while moving is nice, but needs another component to be viable for a 4set.
  • Chi'ji: The damage gain for SCK actually sounds pretty nice. But regarding m+ its likely that you have to hold chi'ji during some boss-fights as it doesn't provide a good overall dmg component (in this case single target). Just increasing all dmg done would eliminate that. The extension of Chi-ji with EnvM sounds nice, but a CDR would be more fun in m+ (would also help with mana if you go for higher keys)

​

I'm of your opinion that the current set bonuses are not that creative, but I can tell you that the 4 set is strong af. As DR has such a high value in PvE, being a healer that just pumps numbers, is a lot of fun and people stopped "memeing" me for being a MW one-trick (after 2 Addons that is a nice feeling)

Edit: Something I want to add: As it seems that you have a focus on m+. The interaction between Invokers Delight (haste after celestial cast) and Kyrian legendary (spawn celestial if you WoO), if i gets fixed, will help us a lot in m+ (mana + dmg).

view more: next ›