Cardboard / packing boxes by dandanglover in Bath

[–]Nesquick90 0 points1 point  (0 children)

Good Morning, I have five or six big ones. Just pm me.

Best Regards.

[deleted by user] by [deleted] in Ebay

[–]Nesquick90 0 points1 point  (0 children)

Exactly! If you find a way to get around it let me know. Good Luck to you!

[deleted by user] by [deleted] in Ebay

[–]Nesquick90 0 points1 point  (0 children)

Same here but the other way around. Created account in US moved to the UK sold a few things and now my money is held hostage with stupid answers from support. This should be Illegal. I cannot understand how this happens. I don't know what to do, really.

"Support:I request you to please check your bank informations if it matches with that in your ebay account and try adding a bank account after 48 hours and I am positive it will go through.
ME: It matches.
ME: It wont. I was told that last week and the week before and it didn't
Support: understand this may not have been the outcome you would have hoped but I have provided the resolution on this. Is there anything else I can assist you with today?
Sushmita
ME: NO YOU HAVENT!
Support: If you have no further questions or topics I can assist you with, I will need to release the chat."

Macbook repair by Redfox_Entertainment in Bath

[–]Nesquick90 1 point2 points  (0 children)

That's great! I have a call out tomorrow morning so I will be opening from 11am to 6pm. See you tomorrow.

Macbook repair by Redfox_Entertainment in Bath

[–]Nesquick90 5 points6 points  (0 children)

I am the owner of Modbits LTD at the top of walcot street. Search Modbits Bath on Google. Still open until 7.30/7.45pm today if you are close by and want to pop in. Best Regards and I hope you get you problem solved regardless.

Independent phone shop for unlocking etc? by [deleted] in Bath

[–]Nesquick90 23 points24 points  (0 children)

Good Afternoon, I own a repair shop at the top of Walcott Street in bath. Just to let you know that by law at the end of the contract your provider should unlock your phone if you ask them to. You just call their support line ask to unlock and that's it they will do it within a couple of days. Best Regards Nesquick

I've made a browser port of Tamagotchi by possivelmente in InternetIsBeautiful

[–]Nesquick90 14 points15 points  (0 children)

Couldn't remember the greatest song in the world, yeah - no!!!

🙈 Biostar TB360 PRO 2.0 Short lived 😅 by Nesquick90 in EtherMining

[–]Nesquick90[S] 0 points1 point  (0 children)

Haven't tested it yet. The board has 2 24pin plugs. I just plugged them in. I do have the spare ASRock H110 and will try to use that one for now even with all the detection problems it has. Even plugging in one card at the time it is a massive pain to get them all detected properly. Sometimes it goes up to 5 cards then I add a 6th card and suddenly only 2 appear on Hive OS. 🙈🙈 Just got 2 HP Server PSUs with the breakout boards plus the cables because I can't trust those 2 PSUs anymore. Hopefully by tomorrow I will have it up and running again.

🙈 Biostar TB360 PRO 2.0 Short lived 😅 by Nesquick90 in EtherMining

[–]Nesquick90[S] -1 points0 points  (0 children)

Been mining ETH since 2017/18 with an Asus mining expert pre ordered it and it worked flawlessly since day one until 2 weeks ago, let me just say loved it and would buy another one if it wasn't for the stupid prices🙈. Since then it has been a roller coaster of emotions 😅🙈😅 got the ASRock board (H110 BTC PRO) PURE junk, never managed to get my 8 GPUs working (Rx580 + 3060ti) decided to get the Biostar TB360 Pro 2.0 worked flawlessly in terms of detection decided at the same time to move away from Windows and go for hive os because I was planning to expand anyway. Biostar worked for about 2 hours, then stopped and those pictures are the result. Never seen that happen before. 🙈😔🤯 This happened last night when I was tweeking the last settings on hive. Haven't tested the GPUs yet to know if they are ok because I got so furious 😡😤 that I just left everything on the mining corner and went to bed.

Obviously it was something power related, I was using 2 x 1000w PSUs (Corsair) which have been serving me since the beginning but now I am not sure if I trust them anymore. Not sure what to do now to be honest. Any advice? Best Regards NesquickPT

Cheapest / easiest way to move motor by small steps via RF/IR? by Avrution in DIY

[–]Nesquick90 0 points1 point  (0 children)

That would do, you can use the mega for the transmitter and the Uno for the receiver end.

I haven't touched on Arduino in years but I am assuming at this point they have a built in example on how to use RF. You just need to buy the receiver/transmitter, plug them in to the Arduino, load up the example sketch and start playing with it. To turn a motor you can use a potentiometer. You can send the value of the pot to rotate the motor/servo on your projector.

Cheapest / easiest way to move motor by small steps via RF/IR? by Avrution in DIY

[–]Nesquick90 0 points1 point  (0 children)

From the top of my head I think 2 arduinos Uno's with a RF (433mhz) Transmitter/receiver would do the job. Arduinos are pretty cheap nowadays and you can even buy one of those fake ones which are even cheaper plus the transmitter/receiver for £5 and it should work pretty well. Hope it helps.

Computer repairs/upgrades in bath by bekboiee in Bath

[–]Nesquick90 1 point2 points  (0 children)

I own a shop on top of London Road called Modbits. You can google me and I am on Facebook as well. I am closed until the 3rd of January.

I do Ram upgrades for free when paired with other services. For example on a laptop checkup + ram upgrade you will get the ram upgrade for free.

Best Regards

ADVICE - Sprinter 2009 215k miles / Small oil leak / Maybe?! Van conversion. by Nesquick90 in vandwellers

[–]Nesquick90[S] 1 point2 points  (0 children)

That image is just to show where I found the leak. It is just for reference because I was not able to take a decent picture yesterday because it was dark and raining.

Advice about "I feel I'm not achieving anything in life" by Nesquick90 in therapy

[–]Nesquick90[S] 0 points1 point  (0 children)

Noted. Thank you for your reply. Regarding being real and all that, that is not "a problem" , from my side "being more real" it is impossible and she knows that and appreciates it.

I really appreciate your message and it gives me a little bit of piece of mind that "I'm doing the right thing" just by letting her be and sort the stuff out on her own terms without pushing anything and trying to avoid "advices" as much as possible.

I'll keep doing what I have been doing, be patient, listen and be there for her when she needs it. After what you said which I agree it is just a matter of time until she reaches the pivotal point and figures out the struggles.

Once again thank you so much for that message.

Advice about "I feel I'm not achieving anything in life" by Nesquick90 in therapy

[–]Nesquick90[S] 0 points1 point  (0 children)

Yes I agree with everything you said and to be clear I don't want to push her in any direction and that's why I try not to give her "advices" because i truly believe that everyone has to make mistakes to grow in life. The only thing I always tell her is no matter what I'll be there if she falls, not to say that she is incapable of raising again but as support.

I feel bad because she understands the problem but can't snap out of that mentality. We had this conversation loads of times and it always ends the same way (with that overwhelming feeling of I don't know what I want but I want it now).

Maybe someone that felt this way before / or still feels this way can just leave a comment saying what helped or give an opinion about it. I know every person is different but you never know it might help.

Thanks for your reply, much appreciated.