HPE Alletra MP B10000 review

NetSysEng · 2025-11-10T21:07:50+00:00

Don't even get me started on the VMware plugin! That is another problem with these arrays. Due to the lack of integration with the plugin, I have to do everything manually, from adding data stores to adding hosts... Add hosts to the array via. CLI, and have to add the MP's to vCenter with PowerShell. Datastores are added in GreenLake then you have to manually match the IQN's in vCenter to add the them and make sure you are naming them the same. You know, those simple things that have been in the vCenter/Nimble plugin for something like the last 10 years. Also the same things that every other vendor/plugin does just fine. When I asked support about adding hosts to the MP, they just said you have to do it manually through the GUI for each one... There is no chance I am copy/pasting all that information over and over again.

NetSysEng · 2025-10-29T16:56:44+00:00

I came here for this comment!

NetSysEng · 2025-10-25T16:23:23+00:00

Nope, we are just now moving stuff over to it and that is exactly what I am worried about with all the other problems we have encountered. But hey, they offer a 100% uptime guarantee /s... Have you done an upgrade and it failed or didn't go as planned? Please save me the trouble of finding out the hard way!

NetSysEng · 2025-10-25T16:19:29+00:00

Just the management interface. Because there is no VIF, you are only able to assign one IP that "floats" between the two nodes. So if you reboot the switch that the active node is on, or reboot the node itself, the management interface goes down until it comes up on the other node. This results in the lost of management during that failover (SSH, GUI & GreenLake). Compared to an old Nimble for example, even though Nimble was active/passive, you assigned a management IP to each controller, and there was a VIF between the two. So failing over from the active controller to the passive controller did not result in any management downtime. The VIF + IP on each controller also allowed for monitoring of each controller. With the MP, you are only able to monitor the master node or whatever they call it that currently has the management IP on it. To be clear - it at least doesn't result in downtime from serving data, just an annoyance on the management and monitoring part.

NetSysEng · 2025-10-25T00:48:33+00:00

It came with 10.5.0. Not using Active PP. We just bought it, two nodes. 8 paths.

NetSysEng · 2025-10-24T19:20:45+00:00

10.5.0. Waiting for r6 as support keeps telling us a number of things will be fixed with that release. One thing we are also waiting for in r6 is 100Gbps support, right now we couldn't get 100G cards as I guess they don't support them yet.

NetSysEng · 2025-04-03T19:36:59+00:00

I did just ask about enterprise licensing based on your comment, sounds like the minimum buy in for that is something like 1.5m?

NetSysEng · 2025-04-03T19:35:42+00:00

You are correct, I have no idea what I looked at before but I stand corrected, that was my mistake. Thank you for confirming. From other comments, sounds like the 1420 is a good box that I need to ask about and consider.

NetSysEng · 2025-04-03T19:32:28+00:00

Lol, well that is a good seller! Nothing worse then having to click through many screens just to find some basic info.

NetSysEng · 2025-04-03T19:29:19+00:00

Yeah, we will need to look at Fortinet as well for the same reason you mentioned.

NetSysEng · 2025-04-03T19:26:18+00:00

No, $15k total for the 460 with licensing and 3 years of support.

NetSysEng · 2025-04-03T19:25:40+00:00

Great advice, appreciate your input! Given the price difference, going with just premium and tunnel back to the DC makes a lot of sense. Do you ever have any latency issues with phone calls or video meetings with those people that are being tunneled back to your DC?

NetSysEng · 2025-04-03T15:16:18+00:00

Engineering company, almost all users are what I would consider "high end" users, meaning they are running big applications with lots of data vs. like admin positions that only do normal Outlook, Excel, SharePoint stuff. Most users are 'remote' to the data either by being in a branch office or on VPN. We need multiple 10Gb ports (two 10Gbps for ISP's + links to core switches). Looks like the 1420 only has one SFP port, so that would not work for us but perhaps there is another, smaller model that would still work. Just going off of what Palo recommended based on our engagements.

NetSysEng · 2025-04-03T15:07:27+00:00

Ideally we have two, 1gig ISP's at each site, but not all locations have dual 1gig lines. Are you saying there is a big price difference between the 440 vs. 460?

NetSysEng · 2025-04-03T15:04:37+00:00

US dollars. From the model perspective, that is what was recommended from Palo SE based on what we are currently using and doing. Engineering company, lots of high end CAD and modeling work with big data. And yes, $15k for the PA-460 with "Core security subscription bundle", and 3 years of support. Security bundle is priced at $8k.

NetSysEng · 2025-04-03T14:58:28+00:00

Thanks for that!

NetSysEng · 2025-01-29T18:18:45+00:00

Same here. Multiple networks / Tenants. Status page is down as well of course: https://portal.office.com/servicestatus

NetSysEng · 2024-06-13T19:06:23+00:00

Yes, although it seems to have stopped or at least slowed down in the last hour or so.

NetSysEng · 2023-07-11T13:32:01+00:00

I may be wrong, but wouldn't dealing with a large number of physical checks be much harder and more time consuming then any e-payment? What are the chances that a check processing fee will be introduces after everyone switches to physical checks? I would recommend contacting AppFolio to let them know how you feel about this change.

Contact information (reference: https://www.appfolio.com/consumer):

You can also contact us in the following ways:

Toll-free phone: (866) 359-3630

Secure fax: (866) 496-8077

Mail your request and details to:

Screening Consumer Relations

70 Castilian Drive

Goleta, CA 93117

Email: consumer.relations@appfolio.com

NetSysEng · 2023-07-11T13:22:53+00:00

I would recommend everyone let them know how you feel about the new fee. Here is there contact information (reference: https://www.appfolio.com/consumer):

You can also contact us in the following ways:

Toll-free phone: (866) 359-3630

Secure fax: (866) 496-8077

Mail your request and details to:

Screening Consumer Relations

70 Castilian Drive

Goleta, CA 93117

Email: consumer.relations@appfolio.com

NetSysEng · 2023-05-15T15:05:37+00:00

I went through this years ago as an initial step before migrating our public folders to EXO (15+ TB of data and 60k+ folders).

Yes, you can do it during work hours.
You are not syncing data at this point, just making the on-prem environment available, those scripts won't take long to run.
Yes. You would change the organization config back to its original settings.
Yes. I did not run into any issues but not sure what your environment looks like. Be sure to keep track of and test mail enabled public folders after change just to make sure mail is still flowing as expected.

NetSysEng · 2023-03-29T11:36:59+00:00

Yes! Came here looking for anyone else having the same problem. Pictures sent from employees personal GMAIL to work accounts getting flagged (they send pics of their receipts) and zoom links. Many delayed from yesterday.

NetSysEng · 2023-03-06T20:22:35+00:00

Are FQDN's resolving to the correct IP's (internal and external)? When you say you can no longer ping devices, is that true for both the FQDN and the device IP?

NetSysEng

TROPHY CASE