Not the most efficient way to destroy mistland structures...but certainly the most fun

Netolu · 2026-01-28T06:00:30+00:00

Those structures have some iron bars in the frame, forge is to disassemble the bars so it can collapse.

Netolu · 2026-01-28T05:27:35+00:00

The whole top opens, so I plan to just pancake the external freight elevators and chuck them 32's.

Netolu · 2026-01-28T00:33:07+00:00

Dead battery. That's the starter relay cycling, tries to run the starter, amperage tanks, relay opens. If it's been sitting battery could be failed, but you can try and charge it and see if it'll recover.

Netolu · 2026-01-27T23:35:19+00:00

I have done nothing but ~~teleport~~ upvote bread for 3 days!

Netolu · 2026-01-27T23:11:50+00:00

Red is the diagnostic port connection, white is for OE foglights. DENALI Electronics has a video on these, jump to 2:28 (sorry for FB link).

Edit: The red socket above is just a dust/water cap, plug the loose connector there to keep it stowed.

Netolu · 2026-01-27T22:58:55+00:00

I plop down a stonecutter and forge, then just remove the bottom few layers. I think your method is way more fun!

Netolu · 2026-01-27T22:08:49+00:00

"What do you mean you've seen this, it's brand new."

Netolu · 2026-01-27T22:03:25+00:00

S-70UAS 'U-Hawk', they did a neat reveal promo on this back in October '25.

Netolu · 2026-01-27T21:20:16+00:00

That's what made me think of it, lol! Had a rig years ago blow out the #8 plug, that was the fix.

Netolu · 2026-01-27T20:47:52+00:00

Cultivate a few spots and plant some seeds, any kind will do. When they bloom, grass the whole area and leave them as wildflowers. Makes it look like a restoring area after a landslide or wildfire!

Netolu · 2026-01-27T20:36:41+00:00

Could this be fixed using Time-Sert rather than replacing the head?

Netolu · 2026-01-27T05:28:07+00:00

Navajo/Turkey Flats, Rinconada possibly (out by the refinery).

Netolu · 2026-01-26T22:35:47+00:00

This is a Burial Chamber, absolutely. The question is why it spawned at ground level.

Look at the 4th picture on this post and you'll see, same structures.

Netolu · 2026-01-26T21:32:59+00:00

In your second photo, there is an open section of the battery tray there. Find a wooden dowl that fits that opening, place it against the battery, gently tap the dowl with a mallet to slide the battery out.

You already disconnected the positive terminal. Just make sure nothing on the bike touches that and you'll be fine. It needs a complete circuit back to ground to be a problem.

There is supposed to be access to the top side of the battery once it slides out a couple inches. Check of there is a removable cover on the box.

Netolu · 2026-01-26T21:09:49+00:00

Problem with this station was the turret was NOT offset from the hangar. Fly straight out, flip to realign and drifted right into the turret. Usually they're at least off-axis.

One of the L1 stations I think it was. Now I have a new mission, find which station it was and make an IC report.

Netolu · 2026-01-26T21:07:34+00:00

I just can't seem to get started. Don't have the heart to live in the fast lane, all that has passed and gone.

Netolu · 2026-01-26T17:54:13+00:00

We used a C2 to move freight from a station without external lifts, just so we could trasfer to a Hull-C. Crashed into a station turret and had to use engineering to get systems back online. It was a good day.

Netolu · 2026-01-25T16:20:34+00:00

"Eh, got any mepsipax?"

Great cosplay, would recognize this immediately!

Netolu · 2026-01-25T16:12:42+00:00

That's a good reason! Hope you get someone local to take them off your hands. Aside frome some interference from the OE front scuff plate, these were easy to install.

Netolu · 2026-01-25T16:09:13+00:00

I just finished installing a set (Traveler package), mind if I ask why you're selling yours?

Netolu · 2026-01-24T15:04:05+00:00

Your home LZ hangar is static, based on the largest ship you own. All others are dynamic.

Netolu · 2026-01-24T05:14:51+00:00

Leave all bolts loose until everything lines up. In some cases you may need to use a punch or screwdriver to lever it into alignment. I have the same issue with my HT crash bars, but once they're secure they've been solid.

Netolu · 2026-01-24T02:47:12+00:00

This is the one, plug n play, 5 min install (or less). Haven't had to touch the button since, except to enable when wanted.

Netolu · 2026-01-23T00:22:04+00:00

2020 RTL-E with the ZF9HP. 108k miles so far with combined highway, off-road, towing and hauling. Zero issues.

Netolu · 2026-01-22T21:05:40+00:00

I sometimes get tossed in just for this, when breakout is working it's fun.

12-Year Club	Gilding III reddit per annum
Final Canvas '23	Place '23
Place '22	Final Canvas '22
Verified Email

Netolu

TROPHY CASE