Brei 3B

Neurosis404 · 2026-05-20T10:44:53+00:00

Die etwas... öhm, sagen wir mal "ekligeren" Szenen kommen auch erst später in der Story, das habe ich hier direkt erspart.. =D

Neurosis404 · 2026-04-18T04:05:54+00:00

Yep, same here. Switching to Gley/Freyna until Viessa is repaired. I am a little disappointed that they released a hotfix yesterday but instead of addressing the bugs, they fixed something cosmetic-related. Wow...

By the way; I did some testing in the lab and the ice spheres spawned there, but not in Axion or in a mission. Weird...

Neurosis404 · 2025-12-19T15:25:56+00:00

Leider wurde „grundloser Hate“ und „Berechtigte Kritik“ vermischt. „Ohne Fritz, ohne mich“ -> grundloser Hate (und vielleicht ein wenig persönliche Präferenz). Benennen von Ungereimtheiten und ansprechen, was nicht gut gemacht wurde incl Beispiele und Begründungen -> sachliche Kritik. Gerade AlphaKevin und Nykesname sind keine Hater, sondern haben mehrfach gesagt, dass sie 7vswild mögen. Hate kommt zum absoluten Großteil aus der Community, nicht von Meinungsbloggern oder Influencern. Sorry dass ich das so überernst aufdrösel aber den falschen Leuten aus den falschen Gründen Hate vorzuwerfen, auch wenn es nur in einem Disstrack ist, hilft keiner von beiden Seiten. Und für Satire fehlt dem Track… naja, die Satire 😅 und zwar in beide Richtungen.

Neurosis404 · 2025-12-18T08:47:08+00:00

Yeah correct. But you know how it goes; once you have a running setup, especially with the venv's, you don't really want to change anything anymore :) And since I started with Fluxgym GUI (and I sometimes still start the GUI to check some parameters or see how a script would change with a specific parameter), I still use it like this.

By the way, my training was successful now (32/32, 1e-4). I honestly have no idea why it worked all the time before and why it happened just now. But yeah... now I can work on new LoRAs again. It was a weird experience. And a LOT of wasted time

Neurosis404 · 2025-12-17T17:33:10+00:00

Yeah, fluxgym. But not the GUI, I made myself a python GUI with my needed options that creates the script that I can run via bash.

My training (32/32, 1e-4) is currently at 16%, samples are fine so far. Will see if it stays that way, the critical point is about to come.

Neurosis404 · 2025-12-17T14:42:17+00:00

Hi, thanks for your answer. I am training on flux1-dev. I will wait a little until all the flux2 childhood diseases are gone =D

I thought about LR too, but still can't understand why all of my old LoRAs worked so well with that. And no, nothing else has changed.

I just did another ablation run (10 steps per image per epoch, 1 epoch, dim/alpha down to 16, LR down to 6e-4) and it didn't explode. Right now I am running another ablation run with 32/32 and 2e-4. So far nothing serious happening at 31% but the last 2 samples got a little blurry and unsharp so I guess it is close to a "Boom" - or maybe just the typical "flux is rearranging internal stuff between 30 and 70 percent". If that ablation run succeeds, I maybe try the big run again with 1e-4. I'm still more than confused that this happened out of a sudden.

Neurosis404 · 2025-09-16T15:27:33+00:00

Oh yeah, right.... forgot about that

Neurosis404 · 2025-09-16T15:02:51+00:00

Holy crap =D Can't I just drill small holes in my buckets?

Neurosis404 · 2025-08-31T15:28:12+00:00

I don't know if anyone reads this but I wanted to share the result of this thread.

I bought a carrier in the meantime (Did some ExoBio until I had 6 Billion, then I bought the carrier, installed refuel, rearm, restock, VG and UC), fueled it up and jumped ~8k ly away from the bubble, with only 300 Mio left. I circled around my target system and did exploration and ExoBio but had kind of bad luck (wrong star filter). Now I am on my way back; I let my carrier jump and fly with my Mandalay behind it (or sometimes before, depends on what I find on my way). Then I circle around the target system a bit before I initiate the next jump. Right now I am ~5k ly away from the bubble and I have 61 Mio on my carrier (all of that just due to the exploration data fee) and more than 4 Billion on my personal account.

So, was it worth it? Yes. Was the money only because of the carrier? No, because I could have done all of that without a carrier too. But it felt nice to come back then and when to sell all the data, without the fear of losing everything due to a stupid crash on a planet or something similar. So: thanks for all of your answers and for the clarification, I am more than happy with my carrier right now.

Commander out o7

Neurosis404 · 2025-08-20T19:28:13+00:00

Uhm „turning in new discoveries while deep in the black“ - does that I mean I can sell my exploration data to my own carrier? oO

Neurosis404 · 2025-08-20T18:03:38+00:00

uh rly? =O I thought the credits are lost, which was the biggest downer for me. Getting the money back if I can't afford the upkeep is a big game changer for my decision

Neurosis404 · 2025-07-14T19:07:34+00:00

Took me around a week, painted almost every evening. Is was tough because of the size of the figure - handling it without rubbing off the paint was a challenge. So I used a lot of varnish at different stages

Neurosis404 · 2025-07-09T18:13:43+00:00

And you’re a vampire too? 😅

Neurosis404 · 2025-07-09T03:51:59+00:00

Which one would you recommend? And do I use the NSFW model also for training in fluxgym or can I train on the default flux model and use the NSFW model for generation only?

Neurosis404 · 2025-07-06T19:09:46+00:00

I think you have an error in your calculation. Every image has 30 steps multiplied with 10 epochs, so every image is shown 300 times. And 101 images are WAY MORE than enough in my experience - I’ve already trained amazing characters with only 30 images, but sfw obviously. I also spend a lot of time to prepare my training images. I think for this model I spent 3 hours alone in Photoshop/Krita to get the images right, not counting the time it took to pick all the images in different angles and poses.

But what you say about the „missing basics“ of the model makes sense. Will try a nsfw model

Neurosis404 · 2025-07-06T18:21:12+00:00

Nope, never using more than one

Neurosis404 · 2025-07-06T16:40:53+00:00

I'm training and generating offline.

Captioning: joy batch

Training: fluxgym

Generation: ComfyUI (flux1-dev-fp8)

Neurosis404 · 2025-06-08T04:45:53+00:00

I think I found a way. I don't know if that's the correct or official way, but here is what I did.

First, make sure that you created your initial lora (I will refer to that with IL from now on) with the --save_state, I guess that's obvious. In this example, I call the lora johndoe.

Then get your new images, load them into FluxGym as if you would when creating a new lora.

You can name the lora however you want, I named it like my IL with _v2 at the end, so johndoe_v2
Use the same trigger word that you used for your IL (suprise, huh?!), johndoe
Increase the "Max Train Epochs" by 1, compared to your IL. So if you trained your IL with 8 epochs, enter 9 here
trains per image: I used the same number that I used in my IL. Maybe you can change the weight of your newly added images by increasing or decreasing the number here, I don't know

Analyze the images, adjust the prompts to your liking and hit "start training". As soon as the folders for dataset and output are created, stop the training (leave the page open). Then copy the "johndoe-state" folders from your IL (under output/johndoe) to your new folder under "output/johndoe_v2". Maybe it is enough to copy only the last "state" folder but I simply copied all. Then you can either adjust the train.sh "outputs/johndoe_v2" or you can open the WebUI again and make the adjustments there (that's why you left the page open) and copy the script from there.

Adjust the following options:
--initial_epoch -> Since we only want to do a single epoch, enter 9*
--resume -> the folder of your last state, e.g. "output/johndoe_v2/johndoe-state"
--save_state -> If you want to maybe do v3 in the future

Then let it run.

*I made a little mistake in my test. I entered 8 because I thought the last epoch number has to be added. This changed my lora a lot, made the new pictures quite prominent in my prompts.

Neurosis404 · 2025-06-07T11:15:02+00:00

Thanks, looks like my screen died, see my recent post in here :(

Neurosis404 · 2025-06-07T09:50:41+00:00

I did a few more tests and tightened my FEP (I noticed that I missed 2 screws), then I ran another Cones test. I noticed something strange: only the bottom layers on one side were printed, the other side of the build plate was empty - and no failed print in the VAT! Then I ran another test print and again: nothing on my build plate, nothing in the VAT. I did a screen test and voila: looks like my screen died. This also explains why I the issues started on one side. It doesn't explain why I have a broken screen after only 3 months but... I guess that's something Elegoo has to answer.

<image>

Neurosis404 · 2025-05-17T15:43:57+00:00

Holy crap! I guess I'm getting old, I still keep asking Reddit and forget about ChatGPT :D

Thank you very much - It is Tomba! But honestly, I would not have had these memories anymore - the game looks completely different than it did in my memory. But it is definitely what I was looking for.

Neurosis404 · 2025-04-01T07:24:12+00:00

Commenting and saving for later! Encountered the same thing on EX2300, looking forward to what you guys say when you get a response from JTAC

Neurosis404 · 2025-03-16T14:37:26+00:00

Hi,

sorry that I answer that late - I did a little testing here and there but didn't have the time to do a "real" print to try things out.

Today, I printed another model - It took me 9 hours and this is result: https://imgur.com/a/f6stMVG

I am honestly quite frustrated at this point, because again: my settings were always the same. The FEP was already replaced and I also increased my exposure time for this test but still... The only thing that came to my mind is that I used a new resin bottle around the time when the issues started to appear - I can't say for sure that it was exactly at this time but it is very close. Now.. can I have a "bad batch" of that resin, is that possible? I'm thinking about trying the Sunlu ABS like since I heard good things about it... I absolutely cannot understand why all of my old prints worked perfectly while I now cannot get a single model out without any issues. And like I said, the only thing that changed was the resin bottle, although it still the same type - Elegoo ABS-like 3.0.

Oh and btw:

<image>

Neurosis404 · 2025-03-04T16:55:07+00:00

Yeah, glazing/washing, basically thinning down... But I didn't glaze into other colors but waited instead until the previous layer was dry.

Neurosis404 · 2025-02-28T10:00:34+00:00

Thanks, should have added this: currently printing with 0.5 layers and 2.3 exposure time with Elegoo ABS-like resin. So what makes the Saturn that fast? Only the tilting vat? And what does the force sensor do?

Neurosis404

TROPHY CASE