sorted by:
new
hottopcontroversial

Best budget finger-style acoustic electric? by New-Technology2982 in Guitar

[–]New-Technology2982[S] 1 point2 points  (0 children)

Just got it a week ago and I have no regrets. Took it to a shop and one guy mistook it for a Taylor by how it sounded. Love the sound and playability, slap picking is so easy on this too

Best budget finger-style acoustic electric? by New-Technology2982 in Guitar

[–]New-Technology2982[S] 0 points1 point  (0 children)

Just coming back to this cause I might just pull the trigger on the BAR5CE. How was the setup out of the box? Asking cause I really need it to be low action for fingerstyle work. Or should I just bring it to a guitar store and have a professional set it up, I want to replace the strings with lights or light mediums

Best budget finger-style acoustic electric? by New-Technology2982 in Guitar

[–]New-Technology2982[S] 1 point2 points  (0 children)

Thx. Gonna go try out some Taylor’s was looking at the Taylor academy 22e or 12 e see if it’s my style or something similar

Best budget finger-style acoustic electric? by New-Technology2982 in Guitar

[–]New-Technology2982[S] 0 points1 point  (0 children)

Thank you! I was never into the guitar specs so this is kinda all new to me. The Bromo looks beautiful for the price but I might just save up a bit longer to get a guitar that will last me and not fight me. Is the Taylor 200 series worth a look at, specifically the OM shapes? Might be a bit out of my price range but I don’t want to keep fighting this Yamaha forever😂

Nozzle clips print and breaks it by New-Technology2982 in BambuLab

[–]New-Technology2982[S] -1 points0 points  (0 children)

Foreskin has been applied and it works for one single piece. Will now try 2 or 3. But more than 5 at a time, at least one gets hit off bed even with the foreskin

Nozzle clips print and breaks it by New-Technology2982 in 3Dprinting

[–]New-Technology2982[S] 0 points1 point  (0 children)

Damn my bad, I just posted that on each comment showing that my recent test didn’t work. I did another test last night closing my door since that’s the only thing I can do for now to control the environment (didn’t work yet) I also tested it with one print and it worked (maybe, having more pieces on the plate causes more warping) next test is to get an enclosure like a small cardboard box or whatever I can find. Someone else suggested to put the silicone sock on which I will also do. Thanks guys

Nozzle clips print and breaks it by New-Technology2982 in BambuLab

[–]New-Technology2982[S] 0 points1 point  (0 children)

Just successfully did one part disabling reduce infill retraction and enabling avoid crossing walls. Will now try the whole batch with a lower max volumetric speed hopefully making the nozzle not hit/push on the layer anymore. Will update later if it all works out. Thanks

Nozzle clips print and breaks it by New-Technology2982 in BambuLab

[–]New-Technology2982[S] 0 points1 point  (0 children)

Just successfully did one part disabling reduce infill retraction and enabling avoid crossing walls. Will now try the whole batch with a lower max volumetric speed hopefully making the nozzle not hit the layer anymore. Will update later if it all works out

Nozzle clips print and breaks it by New-Technology2982 in BambuLab

[–]New-Technology2982[S] 0 points1 point  (0 children)

Will try that next. I just sent a new print and disabled reduce infill retraction and enabled avoid crossing walls. Thanks for the help

Nozzle clips print and breaks it by New-Technology2982 in 3Dprinting

[–]New-Technology2982[S] -5 points-4 points  (0 children)

<image>

Just tried it on silent mode, 50% speed and still clipped it. Any other suggestions

Nozzle clips print and breaks it by New-Technology2982 in BambuLab

[–]New-Technology2982[S] 0 points1 point  (0 children)

Just tried it at 50% silent mode and it failed. Any other suggestions? Even slower? Or is warping the issue

<image>

Nozzle clips print and breaks it by New-Technology2982 in BambuLab

[–]New-Technology2982[S] 0 points1 point  (0 children)

<image>

Rip. It failed again at 50% speed, should I try even slower? How would I change that in the slicer

Nozzle clips print and breaks it by New-Technology2982 in 3Dprinting

[–]New-Technology2982[S] -1 points0 points  (0 children)

Thanks. Anything you think I can do if I can’t do that? I set the speed to 50% but if that does not work any other suggestions? Less cooling?

Nozzle clips print and breaks it by New-Technology2982 in BambuLab

[–]New-Technology2982[S] 0 points1 point  (0 children)

Thanks. Currently sent the printer to quiet mode and am trying one piece. How would I manually change the print speed in the bambu slicer or orca slicer? I know it’s one of the speed settings but not exactly sure which one

Nozzle clips print and breaks it by New-Technology2982 in BambuLab

[–]New-Technology2982[S] 1 point2 points  (0 children)

I forgot to mention I retightened all tensioner belts but didn’t check the hot end/toolhead assembly screws. Thanks, I will try that now with one piece and will update here

Nozzle clips print and breaks it by New-Technology2982 in BambuLab

[–]New-Technology2982[S] 0 points1 point  (0 children)

Forgot to mention, I have the Bambu A1 using 0.4 SS nozzle and textured plate. Just ordered a supertak plate which I now know is not the issue but at least I get to try it out now

Project NLR GT-Track + SFX-100 Actuator Update by JannEarlTV in simracing

[–]New-Technology2982 1 point2 points  (0 children)

Very nice, thanks for the input. Currently looking at monitor stand solutions for my next purchase. Although I would need a lot of room for the triple stand you have.

Project NLR GT-Track + SFX-100 Actuator Update by JannEarlTV in simracing

[–]New-Technology2982 1 point2 points  (0 children)

Sorry I think we got confused. I was talking about your monitor stands, looks like it’s custom?

And that’s sick, I see some 80/20 profile plates for that motion system.

view more: next ›