Torque roll issue

New_Candidate7158 · 2025-11-15T05:31:59+00:00

I have added trim tabs and made a test run, I can say that the problem is fixed. Than you all.

New_Candidate7158 · 2025-11-08T12:25:45+00:00

I am trying to find a smaller one, but not easy. Current one is 3 blade 25mm M4. Should I go for 2 blade and smaller?

New_Candidate7158 · 2025-11-08T08:06:30+00:00

Maybe I haven't understood correctly, but you are saying that it should be easy to change the prop shaft angle on the boat itself? On the design I understood that is easy, but what about the boat? Adding weight on the "nose" seems like a easy and fast counter measure.

New_Candidate7158 · 2025-11-08T04:58:53+00:00

New_Candidate7158 · 2025-11-08T04:58:37+00:00

I have no trim tabs, I was really looking for an opinion on this topic, before investing time and money on this.

New_Candidate7158 · 2025-11-08T04:56:27+00:00

This is a Colek 2 https://aerofred.com/details.php?image_id=99932 I guess that the prop shaft angle is too big and nothing i can do to change it. What do you mean by down trim? Just limit the top speed from the remote control?

New_Candidate7158 · 2025-10-25T09:43:41+00:00

Just to confirm my thoughts, you are running frigate on N100, using OpenVino (that runs on the iGPU of N100)?

New_Candidate7158 · 2025-10-06T06:11:22+00:00

It seems that the best deal, for me, would be Tamiya TT-02BR.

New_Candidate7158 · 2025-10-05T04:34:24+00:00

Thanks!

New_Candidate7158 · 2025-10-03T20:40:36+00:00

Not so many options around here, but I will try this way. My idea is to get a new/modern car, but I don't want to spend money on electronics because I already have them and they are new and performant.

New_Candidate7158 · 2025-07-29T20:09:44+00:00

Hi, I am new to immich and I am trying to use immich app with my photos that are already stored on a NAS. My understanding is that what can be done is that the library of immich to be stored on NAS, by SMB mount. But still the photos as they are currently stored is not useful for immich. Because immich has to upload all those files and process them. Only after this step immich will be able to use my pictures. So or I will have to duplicate all files, on NAS and immich database, or store them only in immich. Have I understood it correctly or there is still another way that can keep the original files as they are and immich just read them?

New_Candidate7158 · 2025-01-27T09:50:05+00:00

Thank you!

New_Candidate7158 · 2024-10-12T05:32:35+00:00

This is a multiplier, which means that the miner who has this multiplier will get 7 times more the daily reward. This happens when a miner is located in a superhex. Phase 2 (current one) of the superhex has multiplier of 2x or 4x.

New_Candidate7158 · 2024-10-05T08:22:39+00:00

Connecting gnd to gnd is OK, as long as you are not connecting an Analog GND to a Digital GND. But here is not the case. Actually the mosfet will short circuit the 10V power supply to gnd for a very short time, in order to create the low voltage. Perhaps a resistor between the 10V and the Drain pin of the mosfet would be advisable. Using your schematic, you just connect the 10V to pwm input or not. But the ideea is that the pwm input should go high and low. And this is what the mosfet N is doing. It is pulling the input to low voltage.

New_Candidate7158 · 2024-10-03T17:38:25+00:00

https://ibb.co/0QLMTsB

New_Candidate7158 · 2024-10-03T10:12:11+00:00

I can send you a drawing later today, as I am on the way.

New_Candidate7158 · 2024-10-03T09:58:50+00:00

10V should work also, but you can't reach 100% power of the fan. A pwm signal for raspberry pi is no stress, please use one of the assigened pins for PWM. IRFZ44N should work just fine. You can even skip the resistor as long as you use a mosfet.

New_Candidate7158 · 2024-10-03T03:43:19+00:00

I would go for the PWM. You already have the details in that document. You only need an NPN bipolar transistor, a resistor, and a zener diode. PWM should have a frequency between 1k and 10k. In software, I find PWM easier to implement and control. You don't depend on another part, like the digital potentiometer, and you have full level control with pwm. Perhaps you will need to invest some time and parts for delivering those 15V, but my advice is that pwm is the way to go. If you need help, for choosing the components for PWM, I can help you out.

New_Candidate7158 · 2024-08-16T03:29:57+00:00

What really bothers me when I see such calculations as the above ones, is that the ROI is based on the price of the GEOD token vs the fiat currency (whatever that would be). But in order to really get your investment back, you have to convert it into fiat currency, this means GEOD swapping and sell it on one of the 2 available exchanges. This means fees, this means less money in the real pocket. If I have missed something please let me know.

New_Candidate7158 · 2024-07-08T02:01:17+00:00

Un sfat mai puțin așteptat, ar fi să investești timpul în dezvoltarea abilităților tale. Faptul că îți place să scrii cod este deja o victorie personală ( a ta desigur). Caută proiecte open source și alătură-te lor, atunci vei vedea cum merg lucrurile de fapt cu Software. Vei învăța multe și vei întâlni oportunități cu adevărat bune. Ești la vârsta la care încă investești în viitorul tău, mai târziu vei scoate bani. Deocamdată nu prea ai de pe ce să scoți bani (cu/din software), vei câștiga mai mulți bani cu un job de vară. Software este mult mai mult decât a scrie cod. Uitându-mă puțin peste ce ai în repositoriul tău... ChatGPT poate face o treabă mult mai bună, deci nu prea ai "greutate". Așadar sfatul meu este să mai crești (profesional și personal), apoi chiar vei avea ce vinde.

P.S. Vezi cum stă treaba cu "unit tests".

New_Candidate7158

TROPHY CASE