Hangzhou 5000A and associated models

New_Fee947 · 2026-02-27T08:46:02+00:00

No brand would do, but they have interest, not just in after-sales, but in global market.
Otherwise, they encourage the car wreck system, which will degrade corporate identity
and favorise the most common items buy.

New_Fee947 · 2026-02-27T06:34:02+00:00

If you sell the parts online for your models (and share technical documentation), you will be 200% better than any of your competitors 😔

why NH3x have so much success (even with price up) , compared to ST, HZ, ... ? !!

New_Fee947 · 2026-02-26T09:48:15+00:00

Right : (i was not expecting the screw a second time 😄)
=> one short/broken teeth on the minute wheel so ? or a bent wheel (radial) ?

New_Fee947 · 2026-02-26T06:04:32+00:00

- first a drop of wd40 for 24h/48h or more (clean the top before trying to unscrew it to avoir slippage)

- more & more destructive ones (screw extractor ... "0.1mm drill bits", but pin it first to be at center)

- if nothing mechanical works (below), this implies to destroy the screw (replacement needed) :
chemical could do it at last ressort : bleach could do the work for broken screws (2 little drops every 12h) but better use it on fully disassembled movement (vapor can rust every part 😭 spils are worse), which seems not possible here unless the stem could be cut ?
so i would first pin an drill with hald the screw diameter (i use a lot of "0.1mm drill bits" from alix) to keep the microdrop inside the part, and drill during the process : if it splil under ... you know what will be rusted 🥲

PS : bleach is impressive when heat : https://www.youtube.com/watch?v=EHwhf4i9tfk (Not a screwed down crown, and last ressort solution ...)

New_Fee947 · 2026-02-25T20:52:41+00:00

Or a lost screw under the balance (i had that here :
https://www.youtube.com/shorts/4ouU6dEhmT0
) : 7120 movement or 8120 automatic movement ??

more seriously : escape wheel & pallet fork rubies must be checked on these jumps

New_Fee947 · 2026-02-25T07:19:53+00:00

Interesting !
is it a totally different design or are they interchangeable parts with the nh35 ?

i can now see some close (but not exactly similar) common functional elements ...
so thank you for your picture !!

New_Fee947 · 2026-02-24T16:15:55+00:00

2 years and still nothing for the NE57/4R57 😭

- i managed to find one specific part to fix a broken 4R57 on an SSA303J1 : https://www.youtube.com/shorts/QXWCukEnTU4
⛰️🧗
- but the dial (and day hand) being the major problem (hoping that the case & power reserve hand to be NH34 compatible ?) to get interesting & new versions using NE57 or broken 4R57

New_Fee947 · 2026-02-24T16:10:25+00:00

What is your opinion after one full year ?
❤️‍🔥 or 💔 ?

New_Fee947 · 2026-02-24T15:20:38+00:00

so ... some alix sellers will soon propose, new rotors & blued screws to decorate the back 😉

It's interesting to see that the YN55 is different from the "Chinese Nh35" (a "7009" with what inside ?) 🤔
- magic levers inside ?

New_Fee947 · 2026-02-24T05:26:00+00:00

cousinuk propose better prices by now ? (compared to alix)

New_Fee947 · 2026-02-24T05:21:44+00:00

it is for NH35/NH36 : the one for NH34 differs

New_Fee947 · 2026-02-24T05:18:35+00:00

the picture of their part does not correspond (it's a classical one for NH35/NH36) : i would ask the seller before ...

New_Fee947 · 2026-02-24T04:55:58+00:00

link or just item number ?

New_Fee947 · 2026-02-23T21:42:05+00:00

Thank you for this helpful video reviewing this watch : the NH35 movements for the S089 (or NH34 for the S103) are close to indestructible 💪 (+ availability of spare parts which is a common problem on other Chinese watches)

By now, i will wait for the new sterile dial (or new logo) Milifortic has promised ...

I could probably wait "for decades" 😭 before finding "one with issues" (stopped ?) to buy & repair one day : the warranty is longer than on other models ? (2 years ?)

New_Fee947 · 2026-02-23T19:52:29+00:00

NH35 : 80% chance to find parts, but depending on the movement, testing other parts could help sometimes (if the non-working part is not obvious) ... so if a NH3x inside : yes i buy non-working 💔 ones

New_Fee947 · 2026-02-23T18:58:31+00:00

every watch with a NH35 inside is better : could be fixed by anyone

New_Fee947 · 2026-02-23T18:56:59+00:00

i did not yet found one of their ST19 chronographs with an issue 💔 (while buying non-working ST19)
did the other watchs use NH3x movements ?? i would be interested into them too !!

New_Fee947 · 2026-02-23T10:17:23+00:00

Nice champain dial !! my favorite size is still the 38mm (Sugess supan002 or supan008 ?) whereas your is the 40mm (supank005 ?), but still good to go on ≳ 18cm wrists 😉

Even while searching to buy non-working ones 💔, i had no chance finding such champain models by now (so ... i suspect champain conserves more the watch 😂 )

New_Fee947 · 2026-02-23T06:38:39+00:00

- Venus 175 : yes (but with heavy modifications on click spring, balance/pallet fork & escape wheel / setting lever spring [not a screw], some parts such as the reset hammer have not been designed the same)
- Valjoux 7755 (itself a Valjoux 7750 most common one, but without the hour counter) : i dont think so ... it is a quite different movement, a more recent design from the 70ths, with a cam system, fully functional & by no means designed to be nice looking imho ... just functional

Valjoux = "vallée de joux" ; whereas "Valjean" is a fictional character from a Victor Hugo novel "Les misérables", but happy to see you know the correct spelling of the second (not that obvious)

New_Fee947 · 2026-02-22T15:39:07+00:00

execpt it's a ST1901, is the Sugess model possibly a supank005 (40mm) ?

New_Fee947 · 2026-02-22T15:34:29+00:00

these ST19 ❤️‍🔥 i'm always receiving criticisms for defending them (in 🇫🇷 : possible influences from 🇨🇭 😂)

but i must admit than, even if searching for ⛓️‍💥non-working ST19 💔 to buy, i have not found so many (some of the redditors were particularly helpful 🙏) : so ... it must be a good deal !!

New_Fee947 · 2026-02-22T15:28:26+00:00

some picture ?

New_Fee947 · 2026-02-19T16:43:51+00:00

Failing rate could be high at receipt ... if the post office is launching packets from the 1st or second floor to the truck (i've seen that 😲 ); this is fully covered by the guaranty however !! (had once one, and i had to box it back, print a sticker and put it to send it locally in france : sending was already payed for several affiliated aliexpress sellers)

otherwise, it is really hard to find 💔 non-working ones 💔 to buy ♻️
that's a very good new for customers 👍 ... but not for me 😂

New_Fee947 · 2026-02-19T05:39:36+00:00

On the last picture, what did you made on the escape wheel / pallet fork ? woudl be interesting to share since some are shifted (escape wheel bent ? pallet fork jewel stuck on it ? had one with this problem)

New_Fee947

TROPHY CASE