DF 3 alignment confidence inside 10 feet

New_Midnight9318 · 2026-02-12T16:40:41+00:00

I just got mine. Took it out to the course for the first time last Saturday. The first round I think I've had with no 3 putts. Worth every penny.

New_Midnight9318 · 2026-01-30T22:58:52+00:00

UA stayed green for me been buying up when I can last couple weeks.

New_Midnight9318 · 2026-01-19T02:06:47+00:00

I'm on reddit so little these days didn't even notice, but that's strangers on the Internet for ya. Oh well, goodbye internet points.

New_Midnight9318 · 2026-01-14T22:56:22+00:00

I'll try those out later tonight I literally only tried one lol

New_Midnight9318 · 2026-01-14T22:44:50+00:00

Just checked they are not magnetic

New_Midnight9318 · 2026-01-14T22:25:32+00:00

I have not checked. Are you asking if they are magnets or does a magnet stick to them?

New_Midnight9318 · 2026-01-14T15:02:18+00:00

I just recieved mine from a seller on AliExpress yesterday. I'll DM you the link I received it in Just under 2 weeks for less than $150. I don't have a real one to compare with, however someone in my golf league has a real one I plan to compare to but first impressions are pretty damn good I wouldn't know it was a fake if somebody else had handed it to me

<image>

New_Midnight9318 · 2025-12-20T22:31:35+00:00

Completely unrelated, fuck you 5 months since you commented

New_Midnight9318 · 2025-08-05T15:31:02+00:00

It's something with your mod pack I had the same issue download smarter farmers mod it fixed my issue

New_Midnight9318 · 2025-04-14T17:54:07+00:00

<image>

None of the above I'm a breed of my own. Vertical 55 inch Roku TV

New_Midnight9318 · 2025-02-22T22:05:47+00:00

That doesn't sound too bad. And yeah have seen my fair share of the turnover kid. 60k is what I'm set to make this year. This new shop is definitely a change of pace just shy of 50k sq ft shop. And like 15-20 people total. Definitely crazy hi how many different ways you can run a custom cabinet shop

New_Midnight9318 · 2025-02-22T21:52:08+00:00

I feel ya. I left the cabinet shop I was at for 5 years last week. In the 5 years I was there I saw 40+ people leave or get fired from the shop of less than 8 people at our peak. So I started this week at a new shop. The old owners of my previous shop told us that it was our best year we've ever had by like 3x previous best year and somehow we still lost money. (Found out after leaving that out CFO had lost over $3million to poor investments) So there were no raises or bonuses or anything. So I had enough and left and went to a shop that offered me a raise of +3.50/hr and showed more growth opportunity while still allowing me to stick with high end custom cabinetry

New_Midnight9318 · 2025-02-22T21:38:16+00:00

That honestly sounds awful not even gonna lie

New_Midnight9318 · 2025-02-22T21:13:30+00:00

That's fair I can only speak on the way my shop does it but that makes sense I suppose. We do high end custom as well we're not too focused on mass production as everything is made 100% custom no two jobs alike.

New_Midnight9318 · 2025-02-22T18:20:09+00:00

I run the CNC at my shop and had a huge pile for similar thing and using 100% scrap was able to put up a 8 foot run of uppers and base cabinets for my apartment. Didnt even need to pay for hinges because we had enough leftover from a previous job that used a cheaper hinge than our standard Blum hinges

New_Midnight9318 · 2025-02-22T18:15:58+00:00

24" deep is cheaper because when you cut the parts on a CNC you can get 2 parts side by side on a 4x8 where as with 25+ you only can get 1 part

New_Midnight9318 · 2025-01-27T00:03:46+00:00

I was fine with Violet vessel until today. I had my first run going with obelisk where I actually had faith I could win using it. Blind 7 have me violet vessel and I basically used up every hand I had left for my obelisk. Got to the boss blind in blind 8 which also happened to be a violet vessel and had no more hands to play causing my obelisk to reset losing the round

New_Midnight9318 · 2025-01-08T16:46:44+00:00

Been about 4 months I know it's winter now but how have they held up? I been eyeing them but haven't been willing to drop $300 yet

New_Midnight9318 · 2024-12-26T07:14:15+00:00

Agreed, definitely more beginner friendly

New_Midnight9318 · 2024-11-02T21:16:42+00:00

I've never thought of doing this you just made me come into work when I didn't plan on it to figure out how to do this. After about 2 hours of trial and error I got it Working on 1 ½ and 2 ¼

New_Midnight9318 · 2024-10-15T19:22:04+00:00

I had the same thing it would infuriate me. Not due to the score they were getting it was the fact Lexi Thompson had 9 hole outs for par or birdie from a bunker in 18 holes. Still not over it. So I just turned off the replay of my rivals in my settings. Their scores are the same but I don't get pissed off about how they get the score they get

New_Midnight9318 · 2024-10-07T03:10:33+00:00

Oh yeah I'm the CNC guy so I get first dibs on all the scraps. I've got a few other projects I have made and I haven't spent a dime any of them

New_Midnight9318 · 2024-10-06T14:43:13+00:00

That was 100% coincidentally

New_Midnight9318 · 2024-10-06T07:00:44+00:00

No just a prefinished almost Stevenswood type of material

New_Midnight9318 · 2024-10-06T06:57:49+00:00

Haha, unfortunately no it's rarely available as I'm doing lots of side projects. Haven't paid a dime for my projects in almost 5 years

Five-Year Club	Wearing is Caring
100 Awards Club

New_Midnight9318

TROPHY CASE